Ameriwood HOME 5986333COM User manual

5986333COM
4 DRAWER DRESSER
B345986333COM0
Date of Purchase ___ / ___ / ___
Lot Number:
Assembly Difficulty Meter
Easy Tough
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
WARNING
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Follow Ameriwood Home
Tube
You

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
Tube
You
Left Panel
35986333010 Right Panel
35986333020
Top
35986333030 Bottom
35986000040
AB
CD
Apron
35986333050 Kick
35986333060
Brace
35986333070
Stringer
35986000080
Drawer Front
35986333090
EF
GG
GH
I
I
I
I
Left Drawer Side
35986331100
Right Drawer Side
35986331110
J
J
J
J
left
left
left
left
K
K
K
K
right
right
right
right
Drawer Back
35986331120
L
L
L
L
Back Panel
K598600000
This piece is paper
board construction
O
Drawer Brace
35986000140
Drawer Bottom
35986331130
MN
N
N
N

5
ameriwoodhome.com
Board Identification
Not actual size
Tube
You
O
H
G
G
G
E
D
C
B
A
F
I
J
K
L
M
N

6
ameriwoodhome.com
Part List
Actual Size
Tube
You
Not Actual Size
(x14)
#A22510
cam bolt
(x14)
#A22570
cam lock
(x22)
#A21660
wood dowel
(x28)
#A12120
716
" pan head
(x24)
#A11600
1-
14
" screw
(x16)
#A11080
716
" flat screw
(x6)
#A53600
angle bracket
(x40)
#A21110
nail
(x24)
#A11070
euro screw
left cabinet
member
right cabinet
member
left drawer
runner
right drawer
runner (x8)
#A54213
drawer bracket
(x4)
#A56750
slide
(x1)
#A84050
safety bracket kit

7
ameriwoodhome.com
STEP1
Tube
You
(x4)
#A22510
* raw edges are shaded
Screw four cam bolts to top (C).
Fasten the apron (E) to the top (C) with angle brackets and screws.
Fasten the safety bracket to the top (C) with screw.
Tap four wood dowels into the braces (G).
(x1)
#A84050 (x3)
#A53600 (x6)
#A12120 (x12)
#A21660
x3
C
G
E

8
ameriwoodhome.com
STEP2
Proper orientation of CAM LOCK
Tip
Assembly
Quick
Tube
You
* raw edges are shaded
D
F
H
Insert four cam locks into the bottom (D) and two cam locks into
the stringer (H).
Tap two wood dowels into the bottom (D) and the stringer (H) as
shown.
Fasten the kick (F) to the bottom (D) with angle brackets and
screws.
(x3)
#A53600 (x6)
#A12120 (x4)
#A21660
(x6)
#A22570

9
ameriwoodhome.com
STEP3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x2)
#A22570 (x1)
#A21660
(x3)
#A22510 (x12)
#A11070
Insert two cam locks and tap a wood dowel into the left panel (A).
Screw three cam bolts into the left panel (A).
Fasten four metal slides to the left panel (A) with euro screws.
A
* raw edges are shaded
Tube
You
marked with an "L"
(x4)
#A56750
left cabinet
member

10
ameriwoodhome.com
STEP4
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x1)
#A21660
(x12)
#A11070
(x2)
#A22570
(x3)
#A22510
Insert two cam locks and tap a wood dowel into the right panel (B).
Screw three cam bolts into the right panel (B).
Fasten four metal slides to the right panel (B) with euro screws.
* raw edges are shaded
B
Tube
You
marked with an "R"
(x4)
#A56750
right cabinet
member

11
ameriwoodhome.com
STEP5
UNLOCKLOCK
1. Attach the bottom (D), the three braces (G), and
stringer (H) to the right panel (B). Tighten cam locks.
2. Align the left panel (A) onto the bottom (D), the
three braces (G), and stringer (H) and thghten the
cam locks.
1st
2nd
B
A
G
G
G
H
DF
note the orientation of the
holes in the Brace (G)
G
* raw edges are shaded
Tube
You

12
ameriwoodhome.com
STEP6
UNLOCKLOCK
Stand the unit upright to attach the top.
Attach the top (C) to the left and right panel (A&B)
and tighten the cam locks.
A
B
C
E
G
F
G
G
H
H
Tube
You

13
ameriwoodhome.com
STEP7
Tube
You
(x36)
#A21110
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
* raw edges are shaded
Lay the unit onto its front.
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
the address label needs to
be on this side

14
ameriwoodhome.com
STEP8
stud
wallboard
hole
(x1)
#A84050
Option 1:
Screw through the safety bracket and into a solid area of the wall.
If you cannot screw into something solid, use option 2.
Option 2:
Drill a 3/16" diameter hole (5mm) in the wallboard. Tap the wall
anchor into the hole until it is flush. Fasten the safety bracket to
the wall anchor with the screw.
Tube
You
Stand the unit upright.

15
ameriwoodhome.com
STEP9
bracket orientation
(x8)
#A54213
Lay the drawer sides (J&K) down on a flat hard surface. Carefully line up the drawer bracket with the
holes in the drawer sides (J&K) as shown. Using a hammer, tap each drawer bracket stem part way into
each hole. Repeat this process until the drawer bracket is fully seated on the drawer side.
x4
* raw edges are shaded
Tube
You
JK
marked "LEFT" marked "RIGHT"
bracket orientation

16
ameriwoodhome.com
STEP10
I
J
K
(x4)
#A22510
x4
Fasten the drawer sides (J&K) to the drawer front (I) with the screws.
Screw a cam bolt into each drawer front (I).
(x16)
#A12120
marked "RIGHT"
marked "LEFT"
* raw edges are shaded
Tube
You

17
ameriwoodhome.com
STEP11
N
I
J
K
* raw edges are shaded
N
x4
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x4)
#A22570 (x4)
#A21660
Insert a cam lock and tap a wood dowel into each drawer brace (N).
Attached the drawer brace (N) to the drawer front (I) and tighten the cam lock.
Tube
You
UNLOCKLOCK

18
ameriwoodhome.com
STEP12
L
MN
I
J
K
* raw edges are shaded
marked "BACK"
(x24)
#A11600
x4
Slide the drawer bottom (M) into the grooves of the drawer sides (J&K) and the drawer front (I)
Fasten the drawer back (L) to the drawer sides (J&K) and to the drawer brace (N) with the screws.
Tube
You

19
ameriwoodhome.com
STEP13
I
K
J
marked with an "L"
marked with an "R"
Fasten metal slides to the drawer sides (J&K) with screws.
(x16)
#A11080
left drawer
runner
right drawer
runner
(x4)
#A56750
L
Tube
You

20
ameriwoodhome.com
STEP14
Notice, the drawer bracket holes are
slotted. Drawer fronts can be adjusted
by loosening screws, making needed
adjustments and retightening screws.
Slide all four Drawers into the Cabinet.
I
I
I
I
I
Tube
You
cabinet member
roller
drawer runner
roller