EUROCOM P150HM User manual

P150HM
LCD Replacement Manual

NOTE: All disassembly procedures assume that the system is turned OFF, and discon-
nected from any power supply (the battery is removed too).
Maintenance Tools
The following tools are recommended when working on the notebook PC:
• M3 Philips-head screwdriver
• M2.5 Philips-head screwdriver (magnetized)
• M2 Philips-head screwdriver
• Small flat-head screwdriver
• Pair of needle-nose pliers
• Anti-static wrist-strap
1. Remove the 4 LCD Rubber
Pads (Circled Red)
2. Using a Philips screwdriver
remove the 4 screws

4. Using a Philips screw driver
remove the 3 screws on each
side of the LCD Panel
3. Using the ends of your fin-
gers carefully pull the LCD
frame up and out releasing it
Do the same on both sides and
pull forward to release the LCD
Front Cover

5. At the top of the LCD panel pull
forward placing the LCD panel on
the keyboard area
6. Carefully remove the LCD cable
from the LCD
7. Remove the LCD