Eurooffice Mex 998ET119EW User manual

1 2 3
4 5 6
7
121
2 1 1
4
2
1
3
4
5
6
7
2
1
2
4
2
1
x2
A
A
Bx4
D
4x4
Cx8
D
4x4
C
D
D
5x5
D
B
2
3
1
D
3
818
4
D
A
Item No.: 998ET119EW
Installation guide
50KG
25mm/s
100-240V
730mm
1230mm
0~40°C
2
Technical Data
Column Number
Maximum Load
Max Speed
Input Voltage
Lowest Position
Highest Position
Desktop Size
Duty Cycle
Applicable Temperature
Continuous operation for 2 mins at most after
pause for 18 mins
1200mm(length)
600mm(width)
Ax4 Cx1
Bx8
X3
D
M6 5x5(With cross)
M6
ST4.2 4x4
Accessory List
Attention: The drawings below are only for reference which might be slightly different from the actual object, please in kind prevail. Any tools missing
or installation problems, please contact the customer service firstly.
Part List
Installation Instruction
No. Part Qty No. Part Qty No. Part Qty
Tabletop Lifting column
Feet Power plug Adaptor
Cable
mounts
Hand-switch
Adapter
cable
Install the lifting column
STEP1
STEP2 Install the feet
STEP3 Install the hand switch
Long side of
the column
Short side of
the desktop
Rotate the column after
inserting it to the bottom
to avoid height difference
Install the lifting column (2) to the tabletop(1),
then tighten the screws (B) with allen key (D)
Rotate the column after inserting
it, making the screws on the
supporting beam into the column slot
Tighten the screws (B) with 4*4 allen key
Screws
Insert the hexagon head of the column
along the wiring trough, the side of the
wire head facing the motor
Insert
Connect lifting columns(2) to the feet, tighten
screw(C) with allen key(D)
Fix the hand switch with the screw (A)and tighten it with 5*5 wrench (D)

3
6
5
6
8
Connect all cables to the adaptor
Connect the switch cable
to the DC port
Connect the motor cable
to the M1 port
Connect the power after the
wiring is completed
Insert the adapt (6) to the bracket
of the tabletop
Fix the cables to the tabletop with cable
management(7) to keep desk clean
Ripped
Organize the lines
Fixed
Common fault treatment
The following tips will help you detected and eliminate the common
fault and error. If the fault you met is not listed below, please contact
with your supplier. Only the manufacturer and professionals are capable
for investigating and correcting those fault and error.
Fault phenomenon Method
No response while long pressing
down arrow after connected with
a power supply
1.Check if all the cables be connected well
1.Check if all the cables be connected well
2.Contact your supplier or dealer
2.Contact your supplier or dealer
No response while pressing up
arrow/ down arrow after
connected with a power supply
Rising in a low speed
1.Check if overloaded, max loading: 50kg;
1.Check if overloaded, max loading: 50kg;
1.Check if overloaded, max loading: 50kg;
2.Contact your supplier or dealer
2.Contact your supplier or dealer
2.Contact your supplier or dealer
The motor not move as instructed 1. Contact your supplier or dealer
1.Reposition
2.Contact your supplier or dealer
Go down but not go up
Downward sliding
Frequently Reposition
Overwork
（Duty cycle:Max 2min on/18min OFF）
1.Restart after suspend for 18mins while
connecting with power;
2.Contact your supplier or dealer;
Attention
1. Power supply: AC100V-240V,50/60Hz
2. Service Environment: 0-40℃
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet
dishcloth when cleaning, be careful not to let the drops into the internal parts, not loose
the connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so
dispose of it in accordance with each country's environmental legislation, not the
general household waste.
5. Check carefully to ensure correct and complete assembly before using.
6. Be familiar with all functions and program settings of the product before first use.
7. Children are forbidden to play on the product because of unforeseen action when
playing, so any dangerous consequences caused by this improper action will not be on
manufacturers.
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not
have any effect on the use of the equipment.
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure
that the cleaner used will not pollute the environment.
10. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance.
11. Cleaning and user maintenance shall not be made by children without supervision.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or a similarly qualified person in order to avoid a hazard.
13. Please make sure there is no hazard sources in your operating environment. e.g.,
do not litter the tools around. Always be careful to treat the packaging materials in order
to avoid any possible danger, e.g. plastic bag may lead to choking hazard to children.
14. Keep the original package of the equipment if necessary in case of the future use in
transportation.
Waste disposal This marking indicates that this product should
not be disposed with other household wastes.
To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environmental safe recycling.
Not enough up&down height
2.Contact your supplier or dealer.
1.Perform a reset operation;
STEP4
S.C. Eurooffice Mex S.R.L.
Address: 21st Fabrica de Glucoza Street, 2 District, ZIP code 020331, Bucharest, Romania