EuropAce ETF 956P User manual

INCLINABLE TOWER FAN
-ETF 956P-
Thank you for purchasing EuropAce Inclinable Tower Fan.
For safety purpose, please read this operating instruction manual carefully before using and
keep it for future reference.

CONTENTS
Safety Precaution……………….….…..………..................................1
Warning ………………………………….……......................................1
Parts ………….…………...….…………………….…………………..........2
Assembly Instruction ..………………………………………………..…..2
Battery Installation For The Remote Control ….………….............2
Operating Installations …………..….……......................................3
Functions …...…………...….…………………….…………………..........4
Cleaning And Maintenance …………………………………………..…..5
Main Specification …….…..…………………………………………..…..5

SAFETY PRECAUTION
READ AND SAVE THESE INSTRUCTIONS BEFORE USING THIS FAN
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the following:
1. Keep electrical appliances out of reach from children. Do not let them to operate the appliances without
supervision.
2. To protect against the risk of electrical shock, do not immerse the product, cord or plug into water or
any other liquids.
3. This product is for household, non-commercial and indoor use only.
4. This product is not intended for use by person (including children) with reduced physical, sensory or
mental capabilities unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
5. If the power cord or plug is damaged, it must be replaced by the service centre or a qualified service
technician to avoid hazard.
WARNING - to reduce the risk of fire, electrical shock or injury to persons or property, please read and
follow below instructions carefully:
Always operate the product from a power source of the same voltage, frequency and rating as indicated
on the product identification marking.
Do not operate this product if it has malfunctioned, damaged cord or plug or appears damaged in any
way. Return the complete product to the place of purchase for inspection, repair or replacement.
This product should not be used in the immediate vicinity of water, such as bathtub, washbowls,
swimming pool etc. where the likelihood of immersion or splashing could occur.
Always switch off and unplug the plug from outlet when not in use, before assembling or disassembling
parts and before cleaning. Fully assemble the set before operating.
Avoid contacting with moving parts. Do not insert any object through the guard when the set is
operating.
Do not cover the guard or operate in close proximity to curtains, etc.

PARTS
Tower Fan
Front Base
Rear Base
Bolts (4pcs)
ASSEMBLY INSTRUCTION
WARNING: Always ensure the product is unplugged from the electrical outlet before relocating,
assembling, disassembling, or cleaning it.
1. Remove the 4 bolts from the centre bottom of the fan body.
2. Connect the Front Base and Rear Base together and attach the assembly to the underside of the Tower
using the four bolts. The base will only fit onto the Tower in one direction.
3. Place the Power Cord into the notch in the underside of the Rear Base.
4. Place the assembled Tower Fan on a flat, stable, level surface.
Battery Installation for the Remote Control:
1. Remove the Battery Compartment Cover by pressing down on it and out in the
direction of the arrow.
2. Insert two "AAA" batteries (not included) according to the polarity marking
inside the Battery Compartment and then replace the Battery Compartment
Cover.
CAUTION: Remove the batteries when the Remote Control will not be used
for an extended period.

OPERATING INSTRUCTIONS
NOTICE: To avoid damage to the unit, ensure the product is fully assembled before plugging it into an
electrical outlet.
1. Plug the product into a standard 220-240-volt AC electrical outlet.
2. You can tilt the fan backwards from vertical, either 6 degrees or 12 degrees
(see diagram at right), in order to circulate warmer air in the room that has
risen toward the ceiling.
3. Turn on the Fan by pressing the POWER/SPEED Button on the Control Panel.
4. To set the speed of the Fan, press the POWER/SPEED Button on the Control
Panel repeatedly until the Indicator Light above the corresponding speed icon
appears: " " for High, " " for Medium, or " " for Low.
NOTICE: To avoid damaging the product, press only one Button at a time.
5. To start/stop oscillation, press the OSCILLATE Button on the Control Panel.
6. Turn off the Fan by pressing the Power Button on the Control Panel and then
unplug the product from the electricaloutlet.
WARNING: Unplug power cord whenever fan is not being operated. Do not leave
fan unattended while it is plugged in.

FUNCTIONS
Ionizer:
To start or stop the Ionizer Function, press the IONIZER Button on the control panel. The indicator light
above the Ionizer icon " " will illuminate when the function is on. When turned on, the fan will release
negative ions into the air, which are attracted to and bond with positively- charged particles such as dust,
smoke, and other pollutants. Once bonded, these particles become heavier and fall harmlessly to the
ground, making the resulting air cleaner and fresher.
Timer:
To set the Timer Function, press the TIMER Button " " on the control panel repeatedly until the desired
time (up to seven hours) on the " ", " ", or " " indicator(s) appears. For example, to set the timer for
three hours, press the Timer button until the indicators above both " " and " " appear. The fan will turn
off after the set time has elapsed.
Breeze Mode:
To start or stop Breeze Mode, press the BREEZE button on the control panel. The indicator light above the
Breeze icon will illuminate when the function is on. Airflow will alternate among all speeds, including
"OFF".
Remote Control Operation:
The Remote Control can control the same functions as the buttons on the control panel. Press the
appropriate button on the remote to activate/change the desired function in the same manner as described
in the "Basic Operation" and "Fan Options" sections.
Remote Control Storage
Store the Remote Control behind the Control Panel, if desired.

CLEANING AND MAINTENANCE
WARNING:To avoid the risk of electrical shock, always ensure the product is unplugged from the electrical
outlet before relocating or cleaning it.
This fan has permanently lubricated during the manufacturing process and does not required further
lubrication for the entire life of the product.
WARNING: Additional lubrication of electric motor parts could create a fire hazard.
Clean the exterior surface only by wiping with a soft cloth.
CAUTION: Do not use liquids or abrasive cleaners to clean the product.
CAUTION: Do not disassemble this fan for cleaning of internal parts (e.g motor), as this may result in
product damage and will void the warranty.
Store the product in a cool, dry place.
MAIN SPECIFICATION
Voltage : 220-240V/50Hz
Rated Power : 40W
Net/Gross Weight : 4.5/6.0KG
Product Dimensions : L256 x W301 x H950 (MM)
Packaging Dimensions : L218 x W232 x H984 (MM)
WARNING!
DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF. DOING SO COULD VOID THE WARRANTY
AND CAUSE DAMAGE OR PERSONAL INJURY

For more technical details / enquiries, please visit:
EUROPACE SERVICE CENTER
10 Changi South Street 3 #06-01 Singapore 486147
Tel: [phone] | Fax:( (65) 6741 0728
Email:
[e-mail]
www.europace.com.sg | www.strategic.com.sg
This product is distributed by Strategic Marketing (S) Pte Ltd
If there is any technical amendment for the product, it will be edited on the updated version of the instruction manual without
prior notice. The pictures shown in the instruction manual is only for illustration purpose only. If the appearance or colour of the
product is modified, please refer to the actual appliance as a standard.