EuropAce EPF 7183U User manual

18" Stand Fan
Model: EPF 7183U
Thank you for purchasing EuropAce
Stand Fan.
For safety purpose, please read this operating instruction manual carefully before using and
keep it for future reference.

WARNING
1. Don't place fingers or foreign objects through guards into blade,and don't let children close
the fan when the fan is running.
2. Bare-body children,weakling and elder should not stay in front of the running fan for a
long time.
3. Don't place the running fan near opened window or flower or tree or the curtain,portiere
and suchlike places,also don't place the fan in some unplaned place.
4. Close power supply before removing the fan.
5. Dawning operation, cut off the power if appear rubbing sound, rising smoke,move stopped,
send it to check and repair to maintenance station or our factory.
6.This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the applicance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
7. Type Y attachment - Damaged supply cords to be replaced by the manufacturer, service
agent or similarly qualified person to avoid hazard.
8. Don't use the three-prong plug with a two-prong socket.
9. Besides our stating maintenances, non-professional is forbidden to disassemble the fan.
10. WARNING:"ONLY INDOOR USE".
Quality Guarantee
1、Under normal operation,any breakdown caused by quality can be exchanged or fixed free
change within one year(base on sale date).
2、The product has a per manently maintenance material and repairing will be charged after
"Guarantee period".
3、In the following cases, guarantee is not applicable:
a.Breakdown not caused by disassembly, refitment, repair of our company.
b.Natural disaster and other wrong operation.
c.Valid without stamp of sell and tie indicater year.
MAINTENANCES
1. The fan must be cleaned periodically to keep clean and attractive.
2. Open the net ring,remove the net(1)and blade(2).Use mild detergent or alcohol to clean off
the dirt on the fan.
3. Don't web the motor during cleaning.
4. Assemble the fan after cleaning. Be sure the blade is properly fixed in the bearing, close
the four clips and fix the screw in the guard.
5. After assembling,run fan with a slim pole to ensure
well-balance and have no grating.
Notice
1. Avoid the guard and blade deformed during maintainces.
2. The power supply must be closed during the whole maintances.

STAND FAN
FLOOR FAN
MOUNTING CARD WALL FAN
S
G
W565
565
290
290
290
290
290
G
W
S
235
174
H
1180
F GED
640 440155
1180640 480155
295
CBA
290450 510
Model
450 510
500 565
510450
174
500
500 245295
EPF 2183U, EPF 2203U
EPF 7183U, EPF 7203U
EWF 8183U, EWF 8283U
EPF 7183U
EPF 2183U
EWF 8183U
EPF 7203U
EPF 2203U
EWF 8283U
EWF 8183U, EWF 8283U

CHARACTERS
1、Optimized design,elaborately making,the fan is luxury,safe and easy to use.
2、Adopt nice pressure casting technology,light weight and large air delivery.
3、Excellent winding design and with ball bearing,low noise and durable.
4、Build thermal fuse in the motor and ensure overload protective.
5、With three speeds,wind angel can be adjusted up and down.
6、It is suitable to be used in living room,marketplace,hotel,warehouse and so on.
OPERATING INSTRUCTIONS
1.Refer to assembly scheme to assemble the fan, before assemble, please check parts
carefully if any damage during shipment.
2.Move blade before operation, check if flexible and any rubbing with other parts,(Don't
deform the blade).
3.The voltage and frequency should same as the motor label fixed, don't use it in corrosive
and other wet environment.
4.Don't use the fan beyond the height of elevation 1000 meters. and don't use in place with
temperature over 40ºC.
5.When power supply come from socket, the play must accord with IEC335-1.When the
power code is connected with charging line directly, all-polarity switch that the contact gap
is 3mm at least must be in the charging line.
6.By turning switch (8)of floor fan and stand fan can get three speeds,select one of three
speeds, on switch label 0,1,2,3indicates OFF,SLOW SPEED,MEDIUM SPEED,HIGH
SPEED.wall Fan can pull the timing-switch(24) or turn the switch (22) get three
speeds.lable 0 indicates OFF, for HIGH SPEED, for MEDIUM SPEED,
for SLOW SPEED.
7.Oscillation control: For Stand Fan and Floor Fan,press oscillating-button (7) to make the
fan oscillate or stop oscillating.For Wall Fan,pull the oscillating-cord to oscillate or stop
oscillating,and it will exchange once pulling.
8.Pitching control turn off the fan and cut the power supply, hold the top and end of the net
can adjust the angle up and down, This for floor and stand fan. Fitching control for wall
fan,turn off the fan and cut the power supply, hold the mount tube, unscrew(28), will
adjustable,then fixed the screw.
9.height adjustment of pedestal fan: Turn off the power, hold the upper part of the fan (10)
firmly after the blades stop running, and then loosen the plastic locking cover (13) from
clockwise direction, adjust the stand pole of the fan to ideal height, and tighten the plastic
locking cover from the anti-clockwise direction. The height of the floor fan and wall fan is
not adjustable.
10.The wall fan should be installed 2.3 meters or more above the ground
11.Base installation: Loose the L bolt on the bottom of the stand pole and remove the
fastening flange, insert the stand pole into the center hole of the base, put back the fastening
flange and tighten the L bolts.

WIRING DRAWING
~
220-240V
50Hz
fan motor
Secondary(Black)
Low speed
High speed
Ground(Yellow/Green)
Medium speed
Timing switch
Capacitor
(Blue)
(Yellow)
(White)
2
3L
1
motor
Thermal protector Primary N
oscillation switch
TECHNICAL PARAMETER
950 14006570 125050 80 5390 110 58120
C
C
C
C
C
120 5811090 538050 125070 65 1400
950
950
14004650 950 6048 1250 5070 75 90 55
55907570 50125048 6095050 46 1400
C1400
Speed
1400
rpm
AirAir
Item
Parameter
46
volume
m /min
6570
Model W
50 950
Speed
Power
3
rpm
125050 80 5390 110
dB W
6048 1250
PowerNoise Speed
rpm W
dB
5070 75
Noise
3
volume
m /min
Power
Stage 1 Stage 2
Air
58120
dB
90 55
m /min
volume
3
Noise
Stage 3
EPF 7183U
EWF 8183U
EPF 2183U
EPF 7203U
EWF 8283U
EPF 2203U

ASSEMBLY SKETCH MAP
FLOOR FAN
WALL FAN
STAND FAN
28 3029
2621 22 23 24 25
9
20
27
1
63 4
5 2
16
18
17
15
14
13
12
11
10
9
8 67
19
9
86 743
3
2
4
5 1
5 2 1
1.front guard 2.blade 3.screw 4.screw 5.rear guard 6.tail cover 7.oscillation switch
8.Timing switch 9.pallet 10.upper joint 11.gum screws 12.lift pipe
13.Stand pole locking knob14.Stand pole inner locking connector 15.stand pipe 16.base
17. Fastening flange 18.L bolt 19.supporter 20.box 21.speed-grade indicator
22.timing switch 23.switch cord 24.timing switch 25.oscillation switch
26.wall supporter 27.hexagon 28.fixed screw 29.orientation screw 30.screw
EPF 2183U, EPF 2203U
EPF 7183U, EPF 7203U
EWF 8183U, EWF 8283U
EWF 8183U, EWF 8283U

For more technical details / enquiries, please visit:
EUROPACE SERVICE CENTER
10 Changi South Street 3, #06-01 Singapore 486147
Tel: [phone] | Fax:( (65) 6741 0728
Email: [email protected].sg
www.europace.com.sg | www.strategic.com.sg
This product is distributed by Strategic Marketing (S) Pte Ltd
If there is any technical amendment for the product, it will be edited on the updated version of the instruction manual
without prior notice. The pictures shown in the instruction manual is only for illustration purpose only. If the
appearance or colour of the product is modified, please refer to the actual appliance as a standard.