EUROSTYLE PENNY User manual

Assembly Instructions
PENNY Arm Chair
PLEASE NOTE: Check that you have received all
components and hardware before assembling.
If you are missing any parts fax Euro Style at
415.455.8033 or email: [email protected]
10.26.15 ar
M6 x 12mm
M6 x 35mm
A (1pc) C (1pc)
E (4 pcs)
H (8 pcs)
B (4 pcs)
D (4 pcs)
G (8 pcs)
F (8 pcs)
I (1 pc)
During assembly, hand tighten screws only. When
the screws are in place, tighten completely.
Attach Part D to Part B as shown
in the diagram, then screw Part
G to Part B.
BB
C
D,e
D,i D,i
D,e
B
F
F
D
G
Repeat Step 1 and assemble all four legs.
Parts D are marked with either “e” or “i.”
Make sure Parts D marked with “e” are
paralell and Parts D marked with “i” are
paralell, as shown in the diagram.
Attach nuts to the screws.
Attach Part G
to Part B from
the side with the
countersunk holes.
2
3 4
1
D

Assembly Instructions
PENNY Arm Chair
PLEASE NOTE: Check that you have received all
components and hardware before assembling.
If you are missing any parts fax Euro Style at
415.455.8033 or email: [email protected]
10.26.15 ar
M6 x 12mm
M6 x 35mm
A (1pc) C (1pc)
E (4 pcs)
H (8 pcs)
B (4 pcs)
D (4 pcs)
G (8 pcs)
F (8 pcs)
I (1 pc)
During assembly, hand tighten screws only. When
the screws are in place, tighten completely.
Parts D marked with
“e” must be at-
tached to the front
side of the seat. Parts
D marked with “i”
must be attached to
the back side of the
seat, as shown in the
diagram.
Attach the protection caps on the nuts.
5
6
E
A
A
H
eeii