EUROSTYLE 09761 User manual

Assembly Instructions
SABRA 4x2 Shelving Unit Page 1 of 5
PLEASE NOTE: Check that you have received all components
and hardware before assembling. If you are missing any parts fax
Euro Style at 415.455.8033 or email: [e-mail]
During assembly, hand tighten screws only. When
all screws are in place, then tighten completely.
1
2
A (24 pcs)
G (4 pcs)
M (8 pcs) N (8 pcs) O (1 pcs) P (6 pcs)
H (4 pcs) I (16 pcs) J (2 pcs) K (2 pcs) L (1 pc)
B (6 pcs) C (12 pcs)
ø8 x 24mm
ø7 x 85mm 4mm
17mm
32mm
ø8 x 64mm
D (2 pcs) E (16 pcs) F (12 pcs)
A
C
Revised 08.28.13 cy

Assembly Instructions
SABRA 4x2 Shelving Unit Page 2 of 5
During assembly, hand tighten screws only. When
all screws are in place, then tighten completely.
PLEASE NOTE: Check that you have received all components
and hardware before assembling. If you are missing any parts fax
Euro Style at 415.455.8033 or email: [e-mail]
3 4

Assembly Instructions
SABRA 4x2 Shelving Unit Page 3 of 5
During assembly, hand tighten screws only. When
all screws are in place, then tighten completely.
PLEASE NOTE: Check that you have received all components
and hardware before assembling. If you are missing any parts fax
Euro Style at 415.455.8033 or email: [e-mail]
5
6
7Install the casters as shown below and apply brakes
on casters when shelf is at desired location.

Assembly Instructions
SABRA 4x2 Shelving Unit Page 4 of 5
During assembly, hand tighten screws only. When
all screws are in place, then tighten completely.
PLEASE NOTE: Check that you have received all components
and hardware before assembling. If you are missing any parts fax
Euro Style at 415.455.8033 or email: [e-mail]
8 9
10

Assembly Instructions
SABRA 4x2 Shelving Unit Page 5 of 5
During assembly, hand tighten screws only. When
all screws are in place, then tighten completely.
PLEASE NOTE: Check that you have received all components
and hardware before assembling. If you are missing any parts fax
Euro Style at 415.455.8033 or email: [e-mail]
11
It is necessary to
identify the type of wall
that you will x the
product to in order to
get the appropriate
fasteners to attach it
to the wall. If needed,
please contact a
specialist for advice.
Keep the anti-tipping
hardware centered.