EUROSTYLE THEODORE User manual

Assembly Instructions
THEODORE Extension Table
11.23.16 ar 1 of 2
M8 x 48mm 6mm
A (1 pc)
C (8 pcs)
B (2 pcs)
D (1 pc) E (8 pcs)
1
2
During assembly, hand tighten screws only. When
the screws are in place, tighten completely.
PLEASE NOTE: Check that you have received all
components and hardware before assembling.
If you are missing any parts, contact your retailer,
or fax Eurø Style at 415.455.8033 or email:
[email protected].
D
A
Use part D to remove the protective wood
panels. Keep all bolts and screws.
E
DCB
Secure part A to part B by screwing parts C
and E into the holes of A and B.

Assembly Instructions
THEODORE Extension Table
11.23.16 ar 2 of 2
M8 x 48mm 6mm
A (1 pc)
C (8 pcs)
B (2 pcs)
D (1 pc) E (8 pcs)
3
Step 1: Use the P4 wrench
(4mm Allen wrench) to loose
the bolts
Step 2: Align the middle glass
with the glass leaves
Step 3: Retighten the bolts
During assembly, hand tighten screws only. When
the screws are in place, tighten completely.
PLEASE NOTE: Check that you have received all
components and hardware before assembling.
If you are missing any parts, contact your retailer,
or fax Eurø Style at 415.455.8033 or email:
[email protected].
Stand the table in an upright position. Pull the side handles out
and then push the glass extention leaves up. Finish by pushing
the glass extenion leaves towards the center of the table.
How to align the glass top?