EXAGATE PWG INLINE User manual

Support
[e-mail]
HeadOffice
A: Y eş ilceMh. D oğa Sk. KöktenPlaza No:6 Kat:2 34418 K ağı thane- İ stanbul
T: [phone] F: [phone]
E: [e-mail]
PWG INLINE
METER
Quick Installation
Guide

1/2
Support
[e-mail]
HeadOffice
A: Y eş ilceMh. D oğa Sk. KöktenPlaza No:6 Kat:2 34418 K ağı thane- İ stanbul
T: [phone] F: [phone]
E: [e-mail]
Welcome to PWG INLINE METER Quick Installation Guide
INTRODUCTION
Box Contents
• PWG Inline Meter Main Unit
• Assembly Screws
• Mounting Kit
• Power Cables
Before Installation!
Make sure your device is properly
mounted and ready to operate
safely.
Step 1
Plug-in Power Cables to PWG Inline Meter Main Unit. Wait for the “READY”LED. When the LED
comes online PWG Inline Meter Main Unit is ready to run.
Step 2
Main unit is equipped with default IP address
(192.168.1.151). For the first access to the
device a PC must be used to access the main
unit and devices should be connected to the
same network.
Your PC should have a static IP in order to
access PWG Inline Meter. You can carry out
these settings in TCP/IP Settings section of
Local Area Network Connection options.
Step 3
Write 192.168.1.151 on the address bar of your
browser (for instance Internet Explorer) and press
Enter button.
Homepage of the PWG Inline Meter Main Unit is as
follows: Default user name is “admin”and
password is “123456”.

2/2
Support
[e-mail]
HeadOffice
A: Y eş ilceMh. D oğa Sk. KöktenPlaza No:6 Kat:2 34418 K ağı thane- İ stanbul
T: [phone] F: [phone]
E: [e-mail]
Power Cables Connection Diagram

3/2
Support
[e-mail]
HeadOffice
A: Y eş ilceMh. D oğa Sk. KöktenPlaza No:6 Kat:2 34418 K ağı thane- İ stanbul
T: [phone] F: [phone]
E: [e-mail]
Assembly on Rack Unit 1/2

4/2
Support
[e-mail]
HeadOffice
A: Y eş ilceMh. D oğa Sk. KöktenPlaza No:6 Kat:2 34418 K ağı thane- İ stanbul
T: [phone] F: [phone]
E: [e-mail]
Assembly on Rack Unit 2/2

5/2
Support
[e-mail]
HeadOffice
A: Y eş ilceMh. D oğa Sk. KöktenPlaza No:6 Kat:2 34418 K ağı thane- İ stanbul
T: [phone] F: [phone]
E: [e-mail]
All Exagate products are covered with 2 years limited guarantee from the date of original purchase.
(Warranty duration may change depending on your country) Your sales or delivery receipt, showing
the date of purchase of product is your proof of purchase. Exagate is obliged to repair or replace
the defective hardware (or any part of its) with no charge to owner.
Conditions Void of Warranty
•Damages on unit, cable, or screen.
•Defections due to electrical wiring and/or city network.
•Interference to unit by non-authorized staff.
•Any problems caused by act of nature.
•Misusage of unit stated by the user manual.
•Removal or destruction of serial number, warranty labels.
•Any kind of modifications on unit.
EKSAGATE ELEKTRONİK MÜHENDİSLİK VE BİLGİSAYAR SAN. TİC. A.Ş.
Head Office
A: Yeşilce Mh. Doğa Sk. Kökten Plaza No:6 Kat:2 34418 Kağıthane - İstanbul
T: [phone]
F: [phone]
E: [email protected]