Atlas IED TSD-DCPDV User manual

– 1 –
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TSD-DCPDV
DC Power Distribution with
Fixed & Variable Outputs

– 2 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Introduction
The AtlasIED TSD-DCPDV Variable DC Power Distribution Block is designed to reduce cost and
wiring clutter in installations where multiple DC power supplies with the same voltage are
required. Each unit has one 24VDC Input, 4 fixed 24VDC Outputs, 2 5VDC USB Charge Ports
and 2 regulated variable outputs ranging from 5V - 24VDC. Each output has additional filtering
to negate any AC ripple that may be present in the DC signal. Both USB and Variable outputs
have a current overdrive protection circuit. The current output also depends on the power
supply current rating.
The TSD-DCPDV is part of a full line of AtlasIED Time Saving Devices. These compact
(1.5" x 4" x 2.75") units are designed to solve some of the common audio system problems in
the easiest and in the most efficient and cost-effective way. All models are made from high
quality components and include removable individual I/O connectors for quick and precise
wiring, separate ground terminals for all I/Os assuring secured connections, and removable
level controls that can be replaced with tamper-proof security covers. The TSDs are highly
efficient and meet Energy Star™ standards as one 24V DC power supply (available separately)
can power multiple Atlas Time Saving Devices.
Key Features
• Power Distribution for Multiple TSDs
From a Single PSU
• 1 In 8 Out Configuration
• Four (4) Fixed 24VDC Outputs
• Two (2) Variable 5V - 24VDC Outputs
• Two (2) USB 5VDC Charge Ports
• Current Operating 2.5A
• DC Filtering Per Channel
• DC Isolation Per Channel
• Cable Management System
• Multiple Mounting Configurations
• Separate Ground Connections
• Removable Phoenix Style I/O Connectors
• Meets Energy Star™ Standards
• Compact Chassis Design
Audio Applications
• Wireless Microphone Power Supplies
• TSD Power Distribution
• Reduce AC Outlets from Power Strips
• Use Less Power
Installation
• Government Buildings
• Medical Facilities
• Office Environments
• Churches
• Restaurants
• Schools
• Industrial Facilities
• House of Worship

– 3 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Front Panel
1. USB Charge Ports
Connect USB devices to these 2 ports. Maximum current draw from each port is 1A at 5VDC.
Note: These USB charge ports may not charge all devices.
2. Power LED
Illuminates BLUE when 5-24VDC power is present.
1
2
1

– 4 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Rear Panel
TSD input / output connections are removable for easy system wiring. The connector has a
3.5mm pitch between pins.
1. DC Power Input
Each TSD that requires DC power comes with a 2 position connector for an external 24VDC
power supply (sold separately). Because of the TSD’s low power consumption, a single external
power supply may power more than one TSD. Please refer to the specifications on current
requirements in milliamps to match with the appropriate power supply. Note: It is acceptable to
exceed the current requirements of the TSDs but NOT safe to use a power supply that is below
the current requirement of the device.
2. Isolated DC Outputs
Connect all system TSD products to these outputs, ensuring the total current draw of all the
connected devices does not exceed the supply current of the TSD power supply being used.
Observe the polarity of the output connectors and the polarity of the TSD devices being
connected as well. Each output is filtered and isolated.
3. Variable DC Voltage Control
Rotate clockwise to increase the voltage at the 2 variable output voltage connectors. Rotate
counterclockwise to decrease. A meter should be used to measure the DC voltage at the
output terminals. Adjustment range is 5-24VDC when a 24VDC power supply is connected to
the 24VDC Input.
4. Variable Output Voltage Connectors
Connect devices to these two outputs that require a voltage other than fixed 24VDC. Observe
the polarity at the connectors. Maximum current output is 500mA at each port.
5. Cable Management Retainer Points
Each TSD includes two cable retainer straps for securing the included cable management
retainers. Remove one of the rear panel screws, align the panel hole with a retainer and firmly
tighten the screws.
1 2 3 4
5
5 5
5

– 5 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Cable Management
Knob and Security Cover
All front panel level controls feature a removable knob that can be replaced with an included
security cover. Follow these steps to prevent potentiometer damage or unwanted changes.
1. Knob Installation - Turn the potentiometer shaft fully counter-clockwise. Align the knob
indicator to the lowest setting on the panel and the potentiometer shaft slot. Carefully
press the knob onto the potentiometer shaft. Do not force or damage may occur to the
potentiometer.
2. Security Cover Installation - Remove the knob from the panel and insert the cover. Small
pliers may be required to remove the knobs. Align the security cover to the level control
panel hole. Push the cover into the hole until it snaps into place. Do not force or damage
may occur to the potentiometer.

– 6 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Mounting
Listed below are the ways to mount the TSD and the optional accessories that can be
purchased.
1. Velcro™ - Each unit includes two 2" x 2" pieces of industrial-grade Velcro™ with adhesive
backing to adhere to any flat surface. Clean all surfaces before applying the adhesive side of
the Velcro™.
2. Multi Mount Plate - Each TSD includes a versatile multi-position mounting plate. This
plate allows the TSD to be mounted to any surface; but is ideal for use with rear rack rails
or side rack hat channels. Use the included M3 x 4mm screws to install the plate on the
TSD. Note: Only use the included M3 x 4mm screws as other screws may be too long and
will cause internal damage to the TSD. The multi-position mounting plate is a new addition
being included with TSDs. If the TSD being used did not include the mounting plate, contact
AtlasIED customer service at 1-800-876-3333.
(M3 x 4mm)
(M3 x 4mm)

– 7 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Optional Mounting Accessories
1. TSD-RMK 19" Width Rack Mount Kit - For 19" rack mounting, AtlasIED offers an optional rack
mount kit, the TSD-RMK. This rack mount kit can support up to four TSD units. The kit
includes three blank panels designed to fill any unused slots. Use the included hardware to
mount the TSD into the rack mount kit using the top mount screw holes on the TSD.
2. TSD-RMKHR Half Width Rack Mount Kit - AtlasIED offers an optional rack mount kit that can
be used in half width rack applications including the AtlasIED WMA-HR and AWR-HR
models. The TSD-RMKHR can support up to two TSDs. Included is an extra blank panel to fill
one of the spaces if only one TSD is being used.

– 8 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
3. TSD-RRMK Rear Rack Mounting Kit - For complete flexibility in mounting a TSD or TSD
external power supplies the optional TSD-RRMK is available. The TSD-RRMK can support
mounting of either two larger TSDs with external power supplies or up to 4 TSD models.
Note: Only use the included M3 x 4mm screws as other screws may be too long and will
cause internal damage to the TSD.

– 9 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Block Diagram
DC 24V
DC 24V OUT
DC 24V OUT
5V - 24VDC
ADJUSTABLE
OUPUT VOLTAGE
2X0.5A
USB
DC 5V OUT
2X1A
AUTO RESET
THERMAL SWITCH
AUTO RESET
THERMAL SWITCH
VARIABLE
VOLTAGE
CONTROL
D C
D C
DC TO DC
POWER
SUPPLY
DC TO DC
POWER
SUPPLY
D
D
F
F

– 10 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
System
Type DC Power Distribution with Fixed & Variable Outputs
Inputs
DC Voltage Input 1A - 3A, 24V DC, 3A Max
Connection Removable 2 Position Captive Screw 3.5mm Spacing
Outputs
DC Voltage Output Fixed 24V DC, Current Output Related to Input Power Supply and Load
Connection Qty 4, Removable 2 Position Captive Screw 3.5mm Spacing
DC Voltage Output Fixed 5V DC, 1A Each
Connection Qty 2, USB Charge Port, Front Panel, Note: May Not Charge All
Devices
DC Voltage Variable Qty 2, Ports 1 Adjustable Voltage, Variable DC Output 5V - 24VDC,
500mA Each
Controls
Variable DC Adjust Recess Pot
Indicators
Power Blue LED
Electrical
Isolation Active
Filters DC Storage & AC Ripple
Over Current Auto Reset Thermal Switch for Variable Output
Power Requirements
Idle 10mA
Mechanical
Chassis Color Black
Chassis Material Aluminum
Product Dimensions (HxWxD) 1.5" x 4" x 2.75" (39mm x 101mm x 70mm)
Shipping Dimensions (HxWxD) 2.75" x 5.25" x 3.7" (69mm x 133mm x 94mm)
Net Weight 0.375 lbs (0.165kg)
Shipping Weight 0.625 lbs (0.28kg)

– 11 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Included Accessories
Velcro™ Qty 2, Industrial-Grade 2" x 2"
Multi-Mount Plate Qty 1, Includes Two (2) M3 x 4mm Screws
Cable Retainer Qty 2
Optional Accessories
TSD 24VDC Power Supply
TSD-RMK 1 RU 19" Width Rack Mount Panel (Supports 4 TSD Units)
TSD-RMKHR 1 RU Half Rack Width Panel (Supports 2 TSD Units)
TSD-RRMK Rear Rack Mounting Kit
Warranty Coverage
Warranty Period 3 Years

– 12 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Dimensional Drawings
1601 Jack McKay Blvd. • Ennis, TX 75119 • 800.876.3333 • AtlasIED.com
POWER
USB CHARGE PORT
5V DC
1A
5V DC
1A
TSD-DCPDV
Variable DC Power Distribution
– +
24VDC IN
2.5A
– + – + – +
DC24V
OUTPUT
VOLTAGE
VARIABLE
VOLTAGE
CONTROL
– +
TO SET THE VARIABLE OUTPUT VOLTAGE, MEASURE THE TERMINALS WITH A VOLT METER
WHILE ROTATING THE VOLTAGE CONTROL POT UNTIL YOU GET THE DESIRED VOLTAGE
NOTE: OUTPUT CURRENT IS DETERMINED BY THE SUPPLY CURRENT
5V-24VDC
– +
500mA
– +
500mA
– +
1.5"
(39mm)
2.75"
(70mm)
4"
(101mm)

– 13 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Notes

– 14 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Notes

– 15 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Service
Should your TSD-DCPDV require service, please contact the AtlasIED warranty department
through the online warranty claim process.
Online Warranty Claim Processes
1. Warranty submissions are accepted at: https://www.atlasied.com/warranty_statement
where the type of return Warranty or Stock return can be selected.
2. Once selected, you will be prompted to enter your login credentials. If you do not have a
login, register on the site. If already logged-in, navigate to this page by selecting “Support”
and then “Warranty & Returns” from the top menu.
3. In order to file a Warranty Claim, you will need:
A. A copy of the invoice / receipt of the purchased item
B. Date of Purchase
C. The product name or SKU
D. The serial number for the item (if no serial number exists, enter N/A)
E. A brief description of the fault for the claim
4. Once all required fields are completed, select the “Submit Button”. You will receive 2
emails:
1. One with a confirmation of the submission
2. One with a case# for your reference should you need to contact us.
Please allow 2-3 business days for a response with a Return Authorization (RA) number and
further instructions.
AtlasIED Tech Support can be reached at 1-800-876-3333 or atlasied.com/support.
Visit our website at www.AtlasIED.com to see other AtlasIED products.

– 16 –
TSD-DCPDV
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Limited Warranty
All products manufactured by AtlasIED are warranted to the original dealer / installer, industrial
or commercial purchaser to be free from defects in material and workmanship and to be in
compliance with our published specifications, if any. This warranty shall extend from the date
of purchase for a period of three years on all AtlasIED products, including SOUNDOLIER
brand, and ATLAS SOUND brand products except as follows: one year on electronics and
control systems; one year on replacement parts; and one year on Musician Series stands
and related accessories. Additionally, fuses and lamps carry no warranty. AtlasIED will solely
at its discretion, replace at no charge or repair free of charge defective parts or products
when the product has been applied and used in accordance with our published operation and
installation instructions. We will not be responsible for defects caused by improper storage,
misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal
atmospheres, water immersion, lightning discharge, or malfunctions when products have been
modified or operated in excess of rated power, altered, serviced or installed in other than a
workman like manner. The original sales invoice should be retained as evidence of purchase
under the terms of this warranty. All warranty returns must comply with our returns policy set
forth below. When products returned to AtlasIED do not qualify for repair or replacement under
our warranty, repairs may be performed at prevailing costs for material and labor unless there
is included with the returned product(s) a written request for an estimate of repair costs before
any nonwarranty work is performed. In the event of replacement or upon completion of repairs,
return shipment will be made with the transportation charges collect.
EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF
CONSEQUENTIAL DAMAGES FOR PERSONAL INJURY, ATLASIED SHALL NOT BE LIABLE
IN TORT OR CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR
DAMAGE ARISING OUT OF THE INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS.
THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
AtlasIED does not assume, or does it authorize any other person to assume or extend on its
behalf, any other warranty, obligation, or liability. This warranty gives you specific legal rights
and you may have other rights which vary from state to state.
©2022 Atlas Sound L.P. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a
registered trademark of Innovative Electronic Designs LLC. All Rights Reserved. All other trademarks are the property of
their respective owners. All specs are subject to change without notice. ATS003939 RevD 12/22