EXAGATE PWG IP PDU Series User manual

PWG IP PDU
Series
Quick Installation
Guide

PWG IP PDU Series Quick Installation Guide
INTRODUCTION
Box Contents
•PDU
•1 Assembly Screws
•Mounting Kit
Before Installation!
Make sure your device is
properly mounted and ready
to operate safely.
Step 1
Plug-in Power Cables to the PWG IP PDU.Wait for the “READY” LED. When the LED comes
online PWG IP PDU is ready to run.
Step 2
Main unit is equipped with default
IP address (192.168.1.151). For the
first access to the device a PC must be
used to access the main unit and
devices should be connected to
the same network.

Step 3
Write 192.168.1.151 on the address bar of your browser (for instance Internet
Explorer) and press Enter button. Homepage of the PDU is as follows: Default user
name is “admin” and password is “123456”.
Your PC should have a static IP in order to access PDU. You can carry out these settings in
TCP/IP Settings sections of Local Area Network Connection options.

All Exagate products are covered with 2 years limited guarantee from the date of original purchase. (Warranty
duration may change depending on your country) Your sales or delivery receipt, showing the date of purchase
of product is your proof of purchase. Exagate is obliged to repair or replace the defective hardware (or any
part of its) with no charge to owner.
Conditions Void of Warranty
•Damages on unit, cable, or screen.
•Defections due to electrical wiring and/or city network.
•Interference to unit by non-authorized staff.
•Any problems caused by act of nature.
•Misusage of unit stated by the user manual.
•Removal or destruction of serial number, warranty labels.
•
Any kind of modifications on unit.
EKSAGATE ELEKTRONİK MÜHENDİSLİK VE BİLGİSAYAR SAN. TİC. A.Ş.
Head Office
A: Yeşilce Mh. Doğa Sk. Kökten Plaza No:6 Kat:2 34418 Kağıthane - İstanbul
T: [phone]
F: [phone]
E: [email protected]