Exclusive Heritage CL-10160D User manual

INSTALLATION GUIDE
FOR CL-10160D

INSTALLATION MANUAL
RECOMMENDED TOOLS
Main Cabinet
Pen & Ruler Caulk & Caulk Gun Power Drill Phillips Screwdriver Adjustable Wrench Goggles, Gloves & Ear Plugs
swercSnoitallatsnIrorriM
tiKgnitnuoMkniS
ENOCILIS
34.46”
31.5”
60”
59.05”
FOR MODELS:
CL-10160D-WMTP
CL-10160D-WMWH
CL-10160D-WMTP-NM
CL-10160D-WMWH-NM
CL-10160D-CAB-TP
CL-10160D-CAB-WH
SAFETY & PRECAUTIONS
1. Exclusive Heritage
recommends you to review the
Installation Manual before
starting the vanity installation.
2. Please handle heavy objects
with care and support to avoid
mishaps damages or injuries.
3. After completing the
installation, please wait up to
24-hours before using the vanity.
4. When cleaning the top or
cabinet use mild strength for
scrubbing to avoid scratching the
surface.
5. Professional installation
recommended.
PACKING LIST (Not all components may be included, depending upon your purchase)
Optional: Countertop Optional: Mirror Optional: Square Sinks

HOW TO CARRY THE TOP
1. Attach hinge (A) to door with screws (B). 2. Attach mounting plate (A) to cabinet with screw (B).
12
34
1
1
3
23
Fig. A
CAUTION
Whether you are picking up a small or
large marble countertop, always have
extra support handling the heavy object.
We recommend two adults lifting and
manuevering the countertop around.
1.Apply a continuous stream of silicone glue around the
top of the cabinet.
2.Carry the countertop and gently place it onto the
cabinet.
3.Install the backsplash by applying silicone glue near
the edge of the countertop. Then place the backsplash
onto the silicone area. Add additional silicone onto the
edges for sealant if necessary.
Note: Allow up to 24-hours for the silicone glue to dry
before using the vanity.
3. Attach hinge (A) to mounting plate (B)
and snap into position. 4. Align door to cabinet. Use screw (A) to adjust door depth, screw (B) to adjust vertically and screw
(C) to adjust horizontally.
• Apply a continuous stream of silicone glue around the
sink top rim. Flip the countertop upside down.
• Carefully align the sink onto countertop back, fasten the
sink rim with the sink mounting screws.
• Apply a continuous silicone glue along the sink edges to
seal any gaps.
1. Measure the screw holes from the backside of mirror (Fig. A) distance.
Then drill the holes into the wall.
2. Insert the anchor screws into the holes and drill the screws into them.
3. Hang up the mirror into position and it’s done.
2
OPTIONAL: HINGES INSTALL & ADJUSTMENT
OPTIONAL: SINK INSTALLATION
OPTIONAL: TOP& BACKSPLASH INSTALLATION
OPTIONAL: MIRROR INSTALLATION