RemovingtheUnitfromtheBox
Removetheunitfromthebox.
InstallingtheHandle
1.RemovethehandlemountingscrewsfromLHand
RHsidesofthemower(referenceFigure1).
Figure1
1.Handlebracket4.Handle
2.Handlemountingscrew5.Sidebracket
3.Wiretie
2.Unfoldthehandletotheoperatingposition.
3.Reinstallthehandlemountingscrewsonbothsides
tosecurethehandletothemowerhousing(see
Figure1).Tightenallhardwareonthehandle.
4.Usethewiretietosecurethecablestothelowerpart
ofthehandleasshowninFigure1.Tightenallwire
tiesonthehandle.
5.Usewiretietosecurethecablestothesidebracket
tokeepcablesfromtouchingthefueltankasshown
inFigure1
6.Trimthewireties.
Note:Theheightofthehandlecanbeadjustedfor
comfortableoperation.Standbehindthehandleto
determinetheheight.Toadjustthehandleheight,
positionthehardwareintooneofthethreeholeslocated
atthebottomofthehandlebracket.
ServicetheEngine
Important:Themowerdoesnotcomewithoilin
theengine.
Fillingthecrankcasewithoil
Initially,llthecrankcasewith30ounces(0.88liters)
ofoil.Exmark4-CyclePremiumEngineOilis
recommended.RefertotheEngineOwner’sManualfor
anappropriateAPIratingandviscosity.DoNotoverll.
OilCapacity
WithOilFilter30ounces(0.88L)
Beforeeachuse,ensurethattheoillevelisbetweenthe
AddandFullmarksonthedipstick
Figure2
1.Dipstick3.Add
2.Full
Important:DoNotoperatetheenginewiththeoil
levelbelowthe“LOW”(or“ADD”)markonthe
dipstick,oroverthe“FULL”mark.
ChecktheCableAdjustments
FollowtheproceduresintheOperator’smanualto
ensuretheself-propeldriveandBBCcableshavebeen
adjustedproperly.
ChecktheBladeControlLock
Lever
Checktheoperationofthebladecontrollocklever;see
theOperator'smanualforadjustment.
InstallGrassBagonBagFrame
SlidetheframeinsidethebagandinstalltheJ-strips
alongallsidesofthebagopeningontotheframe.
FillingOuttheProduct
Registration
Fillouttheonlinewarrantyregistrationform.
2
