MODEL
NUMBER
HEIGHT
WIDTH
ENGINE SIZE DECK WEIGHT LENGTH
DEFL. DOWN DEFL. UP
LZS22KA484
1
22 hp Kawasaki
®
V-Twin 48" UltraCut
™
Series 4 1089 lbs 79.2" 70.5" 59.6" 51.8"
LZS23KC524 23 hp Kohler
®
Command
™
52" UltraCut Series 4 1088 lbs 79.2" 70.5" 64.8" 56.3"
LZS24KA524
2
24 hp Kawasaki V-Twin 52" UltraCut Series 4 1088 lbs 79.2" 70.5" 64.8" 56.3"
LZS25KC604 25 hp Kohler Command 60" UltraCut Series 4 1133 lbs 83.1" 70.5" 72.8" 62.5"
LZS25EKC604 25 hp Kohler Command EFI 60" UltraCut Series 4 1145 lbs 83.1" 70.5" 72.8" 62.5"
LZS27KC524
27 hp Kohler Command 52' UltraCut Series 4 1088 lbs 79.2" 70.5" 64.8" 56.3"
LZS27KC604
1
27 hp Kohler Command 60" UltraCut Series 4 1133 lbs 83.1" 70.5" 72.8" 62.5"
LZS29KA724 29 hp Kawasaki V-Twin 72" UltraCut Series 4 1208 lbs 86.1" 70.5" 84.9" 73.5"
LZS29EKC7241
29 hp Kohler Command EFI 72" UltraCut Series 4 1190 lbs 86.1" 70.5" 84.9" 73.5"
LZS29PKA604 Kawasaki FX801V Propane 60" UltraCut Series 4 1316 lbs 83.1" 70.5" 72.8" 62.5"
LZS29PKA724 Kawasaki FX801V Propane 72" UltraCut Series 4 1403 lbs 86.1" 70.5" 84.9" 73.5"
lAzer z®s-series sPecificAtions
POWER COMPONENTS
ENGINE
23, 25 and 27 hp Kohler Command V-Twin; 25 Kohler Electronic Fuel Injection (EFI); 22, 24 & 29 hp Kawasaki V-twin gasoline and
Kawasaki Propane engines; Kohler engines governed to 3,750 and Kawasaki engines governed to 3,750.
AIR FILTER
Heavy-duty canister air filtration system.
DRIVE SYSTEM
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated
reservoir, spin-on filter and heavy-duty components.
12 cc pumps and 14. 5 cubic inch motors (48" & 52").
12 cc pumps and 14. 5 cubic inch motors with integrated shock valve (60" & 72").
SPEED
Infinitely variable speed selection from 0–10.0 mph (16.1 kmph) forward, 0–5.5 mph (8.9 kmph) reverse.
PTO ENGAGEMENT
MagStop electromagnetic 200-ft-lbs clutch with spot brake.
FUEL CAPACITY
High-capacity, 12-gallon, single fuel tank with single fill location (except LZS25EKC604). 8-gallon, single fuel tank with single fill
location on LZS25EKC604. For propane units, capacity is 43.5 lbs.
DRIVE-WHEEL RELEASE
Allows unit movement without engine running.
SAFETY PACKAGE
Operator Presence Controls (OPC) and drive system interlock.
ROLLOVER PROTECTION SYSTEM (ROPS)
2-post foldable ROPS standard with seat belt and latch.
DECK LIFT
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport
position.
CASTERS
0.50 thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
CUP HOLDER
Standard.
DECKS
STYLE
Full-floating UltraCut Series 4. Side discharge standard with the option to bag or mulch.
WIDTHS AVAILABLE
48," 52", 60" and 72." 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and
welded spindle mounting reinforcements for improved strength and reduced weight. 4-point suspension, full-floating deck with 3
adjustable anti-scalp rollers on 48" & 52". 4 adjustable anti-scalp rollers on 60"; 6 adjustable anti-scalp rollers on 72".
CUTTING HEIGHT
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
BLADE-TIP SPEED
Approximately 18,500 fpm.
EQUIPMENT
TRACTOR FRAME
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
STEERING AND MOTION CONTROL
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness.
Also adjustable to 2 height positions.
FRONT CASTER TIRES
13 x 5.0-6; smooth-tread, semi-pneumatic on 48," 52" & 60" units, 13 x 6.5-6; smooth-tread, semi-pneumatic on 72" and
LZS27KC604.
DRIVE TIRES
24 x 12.0-12, Turf Master®(60" & 72"). 23 x 9.5-12, Turf Master (48" & 52").
TURNING RADIUS
True zero-turn.
PARKING BRAKE
Lever-actuated disc brake and caliper.
SEAT
High-back, bolstered seat with Elastomeric Vibration Control material.
DIAGNOSTICS
Operational diagnostics with integral fuel gauge. EFI unit has malfunction indication light (MIL). For propane units, the fuel gauge is
located on aluminum tank.
BLADE SPINDLES
No maintenance, sealed and non-greasable spindles. 5.40" diameter cutter housing with 1.75" diameter splined blade driver and
1.0" diameter spindle shaft.
ENGINE OIL
Exmark 4-Cycle Premium Engine Oil.
HYDRAULIC FLUID
Exmark Premium Hydro Oil.
ELECTRICAL
12-volt battery with 15-amp alternator except EFI units has 20-amp alternator.
ENGINE HOURMETER
Standard.
exmark.com
1
Units are carb-compliant.
2
Carb-compliant unit only.
EXMARK MANUFACTURING COMPANY INC. • 2101 ASHLAND AVENUE •P.O. BOX 808 •BEATRICE, NE 68310-0808 •CALL 402.223.6300 •FAX 402.223.6384
BEst-sElling Brand of mowing EquipmEnt for thE landscapE profEssional.
Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. We reserve the right
to improve our products and make changes in specifications, designs and standard equipment without notice and without incurring obligations. See your dealer for details on all of our warranties.
Exmark®and Lazer Z®are registered trademarks, and UltraCutTM is a trademark of Exmark Mfg. Co., Inc. ©2011 Exmark Manufacturing Company, Inc. All Rights Reserved. Printed in the U.S.A. 2011.
