Exor IP-0-T Series User manual

Your Corporate Logo Here
Ethernet/IP Marquee Operation Manual
Model Number: IP-0XXX-T V1.1

Copyright © 2008 Operation Manual 3
Using The IR Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Key Usage Of IR Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
The IR Menus Of The Marquee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Programming With The IR Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Entering Into Program Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Maneuvering Through Setup Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting Plant IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting Plant SubNET Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting Plant Default Gateway. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting Ethernet/IP IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Setting Ethernet/IP Subnet Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Making The Plant Ethernet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Quick Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Required Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Steps To Connect The Marquee Via Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Detailed Ethernet Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Configuring the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using IPCONFIG To Verify Ethernet Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Connecting The PC To The Marquee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Verifying Ethernet Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connecting To the Marquee’s WEB Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Ethernet/IP Implementation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
REQUIRE ETHERNET/IP MASTER/CLIENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
ETHERNET/IP CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Ethernet/IP Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
INPUT INSTANCE DATA MAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
OUTPUT INSTANCE DATA MAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
PLC Program Configuration Example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Marquee WEB Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
MAIN PAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Access Configuration Pages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
SETUP MENU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
BACKUP AND RESTORE PAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
EDIT MESSAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
EDIT TEXT LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
NETWORK SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
PLC COMMUNICATIONS SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
TIME/DATE SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
VARIABLE COLOR SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
VARIABLE DATA SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Mounting Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Mounting Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

4 Operation Manual Copyright © 2008
Installing Mount Attachment Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Mounting Method Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Copyright © 2006 Operation Manual 5
—Chapter 1—
Using The IR Remote
This chapter will discuss the use of the IR remote. The remote is used to initially set the Network
Parameters, Time and Date. It can also be used during operation to allow for resetting of process
variables.
CPWPROG PREV NEXT
SPEPAU
SYMCAP GRA PHR
BEEPCLR DEL ENT
RUN INS ESC
BA C D
FE G H
JI K L
NM O P
RQ S T
VU W X
ZY
21 3 4
65 7 8
09 ALT
TIMEMET FONT COL

6 Operation Manual Copyright © 2006
Using The IR Remote
Key Usage Of IR Remote
There are many keys that are not currently used for the operation of the Marquee display. The
following lists the keys that have operation capability with the marquee.
KEY USAGE
PROG Enter Program Mode
PREV Go To Previous Program Screen
NEXT Go To Next Program Screen
Move Cursor To Left
Move Cursor To Right
RUN Return to Operating Mode
Y Used For Conformation Of Change
N Used for Rejection Of Change
0-9 Numeric Keys For Data Entry
Table 1—IR Remote Key Usage

Copyright © 2006 Operation Manual 7
Using The IR Remote
The IR Menus Of The Marquee
The following are the menus that can be accessed via the IR remote. These menus allow the user to
configure the basic settings of the Marquee display.
Note: On 1 Line units the ENT key must be pressed to access second line of menu.
Menu Usage
Allows the user to set the Ethernet
IP address for the built in plant
ethernet port of the Marquee.
Allows the user to set the Ethernet
SUB NET MASK for the built in
plant Ethernet port of the
Marquee.
Allows the user to set the Ethernet
DEFAULT GATEWAY for the
built in plant Ethernet port of the
Marquee. Not present on 1 line
units.
Allows the user to set the Ethernet
IP address for the Ethernet/IP port
of the Marquee.
Allows the user to set the Ethernet
SUBNET Mask for the
Ethernet/IP port of the Marquee.
Allows the user to set the TIME
for the built in real time clock of
the Marquee.
Allows the user to set the DATE
for the built in real time clock of
the Marquee.
Table 2—Marquee Configuration Menus
PLANT IP ADDRESS
1 92.168.1.200
PLANT NET MASK
2 55 .255.255.000
PLANT GATEWAY
0 00.000.000.000
E/IP IP ADDRESS
1 92.168.1.200
E/IP SUBNET MASK
2 55 .255.255.000
SET TIME
0 2:47:37
SET DATE
0 6/10/06

8 Operation Manual Copyright © 2006
Using The IR Remote
Programming With The IR Remote
The following section will describe the steps that are taking in order to enter program mode and
accessing the Marquee setup menus. In this section the user will be instructed on how to accomplish
the following tasks.
•Set the Ethernet parameters of the Marquee
•Set the Time and Date on the Marquee display
Entering Into Program Mode
In order to access the setup menus the user must put the Marquee into program mode. This is as
simple as pressing the PROG key on the IR remote.
The follow message will be displayed on the Marquee.
Note: The user should be within 20 Ft of the Marquee in order for IR operations!
CPWPROG PREV NEXT
TIMEMET FONT COL
PLANT IP ADDRESS
1 92.168.1.200

Copyright © 2006 Operation Manual 9
Using The IR Remote
Maneuvering Through Setup Menus
Once in program mode, the user uses the PREV and NEXT keys to scroll through the setup menus.
By using these keys the user can select the menu item that is desired and take appropriate action. The
NEXT key takes the user to the next menu and the PREV key goes back to the previous menu. If
the user is on the last menu and presses the NEXT key the first menu item will be displayed. If the
user is on the first menu item and presses the PREV key the last menu item will be displayed.
Note: On 1 line units the second line of the menu is accessed by pressing the ENT on the IR
remote.
CPWPROG PREV NEXT
SPEPAU
SYMCAP GRA PHR
BEEPCLR DEL ENT
TIMEMET FONT COL
NEXT
SET TIME
1 2:10:05
SET DATE
1 0/10/06
PREV
PLANT IP ADDRESS
1 92.168.1.200
PLANT NET MASK
2 55 .255.255.000
PLANT GATEWAY
0 00.000.000.000
E/IP IP ADDRESS
1 92.168.1.200
E/IP SUBNET MASK
2 55 .255.255.000

10 Operation Manual Copyright © 2006
Using The IR Remote
Setting Plant IP Address
The user can set the Ethernet IP address of the built in Ethernet port via the IR remote. Follow these
steps to accomplish this task.
1. Press the PROG key to put Marquee into program mode.
2. The Following message will appear on the Marquee.
3. The user should notice that the first digit within the
IP address is larger than the reset. This indicates the
cursor position.
4. The cursor position can be moved by pressing the
or the key of the remote. As you move the cursor
the enlarged value will move across the Marquee to
indicate current cursor position.
Example: 1 92.168.1.200
Press
1 9 2.168.1.200
Press
5. Pressing any of the numeric keys will change the
value of the current position to that value and move
the cursor position to the right.
6. Once the proper IP address is displayed press the RUN
key. The confirmation message will be displayed.
1 92.168.1.200
ACCEPT NEW IP
P RESS Y FOR YES
7. At this point pressing the Y key will change the
Marquees IP address and return the Marquee to
operating mode.
If the N key is pressed then the IP address will not be
changed and the Marquee will return to operating mode.
PLANT IP ADDRESS
1 92.168.1.200
CPWPROG PREV NEXT
SPEPAU
SYMCAP GRA PHR
BEEPCLR DEL ENT
RUN INS ESC
BA C D
FE G H
JI K L
NM O P
RQ S T
VU W X
ZY
21 3 4
65 7 8
09 ALT
TIMEMET FONT COL

Copyright © 2006 Operation Manual 11
Using The IR Remote
Setting Plant SubNET Mask
The user can set the Ethernet SubNet Mask of the built in Ethernet port via the IR remote. Follow
these steps to accomplish this task.
1. Press the PROG key to put Marquee into program mode.
2. The Following message will appear on the Marquee.
3. Press the NEXT key on the remote to go to the
NET MASK menu item. The follow will be displayed.
4. The user should notice that the first digit within the
mask is larger than the rest. This indicates the
cursor position.
5. The cursor position can be moved by pressing the
or the key of the remote. As you move the cursor
the enlarged value will move across the Marquee to
indicate current cursor position.
Example: 2 55.255.255.0
Press
2 5 5.255.255.0
Press
6. Pressing any of the numeric keys will change the
value of the current position to that value and move
the cursor position to the right.
7. Once the proper SubNet Mask is displayed press the RUN
key. The confirmation message will be displayed.
2 55.255.255.0
ACCEPT NEW IP
P RESS Y FOR YES
8. At this point pressing the Y key will change the
Marquees Subnet Mask and return the Marquee to
operating mode.
If the N key is pressed then the Subnet Mask will not be
changed and the Marquee will return to operating mode.
PLANT IP ADDRESS
1 92.168.1.200
PLANT NET MASK
2 55 .255.255.000
CPWPROG PREV NEXT
SPEPAU
SYMCAP GRA PHR
BEEPCLR DEL ENT
RUN INS ESC
BA C D
FE G H
JI K L
NM O P
RQ S T
VU W X
ZY
21 3 4
65 7 8
09 ALT
TIMEMET FONT COL