Expobar G-10 User manual

SM_EN
Date.: 140328
R
G-10
CAPSULE GROUP
SERVICE MANUAL

2R
G-10 CAPSULE GROUP
CONTENTS Original Instructions
CONTENTS .............................................................................................................................................................................2
SYMBOL DESCRIPTION..................................................................................................................................................5
Hazard intensity levels............................................................................................................................................................................................ 5
GENERAL...................................................................................................................................................................................6
Introduction .........................................................................................................................................................................................6
General instructions...........................................................................................................................................................................6
Warnings...............................................................................................................................................................................................6
Precautions...........................................................................................................................................................................................7
Intended use......................................................................................................................................................................................... 7
TECHNICAL SPECIFICATIONS...................................................................................................................................8
Data sheet ................................................................................................................................................................................................................. 8
Accessories................................................................................................................................................................................................................ 8
OVERVIEW OF COMPONENTS................................................................................................................................9
G-10 MINI CONTROL 2GR CAPSULE............................................................................................................................................................. 9
G-10 DISPLAY CONTROL 2GR CAPSULE...................................................................................................................................................10
DIMENSION SKETCH.....................................................................................................................................................11
G-10 MINI CONTROL 2GR CAPSULE...........................................................................................................................................................11
G-10 DISPLAY CONTROL 2GR CAPSULE...................................................................................................................................................12
TRANSPORT ........................................................................................................................................................................13
Packaging..................................................................................................................................................................................................................13
Delivery inspection................................................................................................................................................................................................13
INSTALLATION...................................................................................................................................................................13
Positioning ...............................................................................................................................................................................................................13
Electrical connection.............................................................................................................................................................................................14
Connection types...................................................................................................................................................................................................14
Water connection .................................................................................................................................................................................................15
Pressure and temperature...................................................................................................................................................................................15
Starting the machine..............................................................................................................................................................................................15
CLEANING AND CARE................................................................................................................................................16
Coffee machine cleaning.......................................................................................................................................................................................16
Daily cleaning ..........................................................................................................................................................................................................16
Weekly cleaning .....................................................................................................................................................................................................16
Regular maintenance .............................................................................................................................................................................................16
Rinsing the capsule group ....................................................................................................................................................................................17
Cleaning the capsule group..................................................................................................................................................................................18
Disassemble the group gasket.............................................................................................................................................................................19
Cleaning the group gasket and capsule holder................................................................................................................................................19
Reassembly the group gasket..............................................................................................................................................................................19
Removing the adjustable spout...........................................................................................................................................................................20
Cleaning the adjustable spout .............................................................................................................................................................................20
Replacement kits for capsule group ..................................................................................................................................................................21
Replacing the pinch chamber kit ........................................................................................................................................................................21

3
R
G-10 CAPSULE GROUP
CONTENTS
Replacing the capsule holder kit.........................................................................................................................................................................21
Additional handling of the machine....................................................................................................................................................................22
STORAGE AND DISPOSAL OF MACHINE......................................................................................................22
How to store the machine ..................................................................................................................................................................................22
Disposal of machine ..............................................................................................................................................................................................22
PROGRAMMING ...............................................................................................................................................................23
Electronic control panel.......................................................................................................................................................................................23
Button functions.....................................................................................................................................................................................................23
Machines equipped with display .........................................................................................................................................................................23
Machines not equipped with display..................................................................................................................................................................23
Additional button functions.................................................................................................................................................................................23
Additional functions accessible from the display............................................................................................................................................24
User functions ........................................................................................................................................................................................................24
Counters..................................................................................................................................................................................................................24
Accessing the counters.........................................................................................................................................................................................25
Litre counter...........................................................................................................................................................................................................25
Service: service alert .............................................................................................................................................................................................26
Total coffees dispensed ........................................................................................................................................................................................26
Number of coffees dispensed per button ........................................................................................................................................................26
SERVICE PROGRAMMING..........................................................................................................................................27
Reset parameters to factory default..................................................................................................................................................................27
Accessing service programming .........................................................................................................................................................................27
Language selection.................................................................................................................................................................................................27
Name 1: Programming the publicity display (upper line)..............................................................................................................................28
Name 2: Programming the publicity display (lower line)..............................................................................................................................28
Helpline ....................................................................................................................................................................................................................28
Dose programming................................................................................................................................................................................................29
Continuous Dispensing button...........................................................................................................................................................................29
Hot water button ..................................................................................................................................................................................................29
Electronic steam wand..........................................................................................................................................................................................30
Level sensor sensitivity.........................................................................................................................................................................................30
Pre-infusion .............................................................................................................................................................................................................30
Grinding alert..........................................................................................................................................................................................................31
Grinding alert parameter settings......................................................................................................................................................................31
LED flashing sequence...........................................................................................................................................................................................31
Maintenance cycles ................................................................................................................................................................................................32
Temperature unit (ºC or ºF)...............................................................................................................................................................................32
Temperature unit (ºC or ºF)...............................................................................................................................................................................32
Water filter: softener regeneration...................................................................................................................................................................32
MESSAGES AND ALARMS...........................................................................................................................................33
TROUBLESHOOTING....................................................................................................................................................34
ELECTRICAL DIAGRAMS.............................................................................................................................................35
Complete electrical diagram: G-10 Mini 2Gr Capsule Group ....................................................................................................................35

4R
G-10 CAPSULE GROUP
Secondary electrical diagram: G-10 2Gr Capsule Group............................................................................................................................36
Electrical power diagram: G-10 2Gr Capsule Group...................................................................................................................................37
Cappuccino Turbo-Steamer...............................................................................................................................................................................38
ELECTRICAL COMPONENTS.................................................................................................................................39
G-10 Mini 2Gr Capsule Group..........................................................................................................................................................................39
Components common to both models...........................................................................................................................................................39
G-10 Dispaly 2Gr Capsule Group ....................................................................................................................................................................40
DETAIL DRAWINGS.......................................................................................................................................................41
G-10 Mini 2Gr Capsule Group: Housing parts.............................................................................................................................................. 41
G-10 2Gr Capsule Group: Housing parts.......................................................................................................................................................43
G-10 Mini 2Gr Capsule Group: water system...............................................................................................................................................45
G-10 2Gr Capsule Group: water system........................................................................................................................................................ 47
G-10 Mini 2Gr Capsule Group: boiler assembly........................................................................................................................................... 49
G-10 2Gr Capsule Group: boiler assembly.................................................................................................................................................... 51
G-10 Mini 2Gr Capsule Group: Rotary pump ............................................................................................................................................... 53
G-10 2Gr Capsule Group: Rotary pump ........................................................................................................................................................55
Capsule group........................................................................................................................................................................................................57
Capsule group Caffitaly........................................................................................................................................................................................59
Capsule group Lavazza......................................................................................................................................................................................... 61
Adjustable outlet................................................................................................................................................................................................... 63
G-10 2Gr Capsule Group: water supply and drainage set..........................................................................................................................65
Steam tap ................................................................................................................................................................................................................67
Turbo-Steamer ......................................................................................................................................................................................................69
Hot water taps ...................................................................................................................................................................................................... 71
SERVICE INTERVALS.......................................................................................................................................................73
G-10 Mini Control 2Gr Capsule ....................................................................................................................................................................... 73
G-10 Display Control 2Gr Capsule.................................................................................................................................................................. 74
CONTENTS

5
R
G-10 CAPSULE GROUP
SYMBOL DESCRIPTION
There are three different levels of hazard intensity, identied by signal words DANGER, WARNING and
IMPORTANT. The level of hazard is determined by the following denitions.
Observe the statements to ensure safety, performance, prevent injury and machine damage.
Important:
Alerts against unsafe practices. Observe to ensure drink quality, machine performance, food
safety, to prevent minor personal injury or damage to the machine.
WARNING!
Indicates a potentially hazardous situation which, if not avoided, could result in scalding, serious
injury and even death.
DANGER!
INDICATES A IMMINENTLY HAZARDOUS SITUATION WHICH, IF NOT
AVOIDED, WILL RESULT IN SERIOUS INJURY AND EVEN DEATH.
Note:
Gives additional information which may be helpful during the cleaning procedure or operation of
the machine.
i
Hazard intensity levels

6R
G-10 CAPSULE GROUP
GENERAL
Read the user manual before using the machine.
This manual contains important instructions on
intended and safe use of the coffee machine.
Keep this manual close to hand for future
reference. If damaged or lost, request a copy from
the manufacturer.
Thank you for choosing the G-10 capsule group espresso machine.
We hope you enjoy it !
Introduction
Warnings
General instructions
Machine installation and certain maintenance
operations should only be performed by qualified
service personnel.
All safety instructions and warnings contained in
this manual should be observed to ensure safe
installation, use and maintenance.
Do not attempt to open or repair the machine or
access the interior. Repair should be performed by
an authorised workshop, by a service centre, or by
qualified service staff.
Do not remove operational or protective parts
requiring use of tools for removal.
Purchasers are liable for ensuring that users have
been trained to operate the machine and have been
informed of the potential risks involved.
The installer will be held liable for all non-
authorised modification of the machine.
Non-authorised alteration or modification of the
machine will exempt the manufacturer of all liability
for damages and will invalidate the warranty.
This manual refers to the machine as at the time
of sale.The commercial availability of subsequent
versions featuring modifications, upgrades or
adaptations does not oblige the manufacturer to
apply the same to this machine, nor does it oblige it
to update the documentation supplied.
The manufacturer reserves the right to withdraw
currently available manuals whenever it considers
appropriate and reasonable.
Place the machine in a location accessible only to
personnel trained to operate it.
Keep all hazardous packaging materials, such as
plastic bags, expanded polystyrene and staples, out
of reach of children.
Plug the machine into a properly installed, earthed
safety socket, whose line voltage matches the
technical data for the machine.
Make sure that the power supply voltage does not
fluctuate by more than 6%.
Position the power cable so that users cannot trip
over it. Keep the power cable away from sharp
edges and heat sources.
Children should be supervised to ensure they do
not play with the appliance.
Install this appliance in a horizontal position in a
water-resistant location. Install the machine away
from heat sources and flammable objects.
This appliance is not suitable for installation in an
area where a pressure washer may be used.
Do not use the machine outdoors, where it would
be exposed to adverse weather (rain, snow, frost).
This will cause material damage to the machine.
If the mains cable is damaged, it must be replaced
by the manufacturer, its service agent or a similarly
qualified person in order to avoid a hazard.
The manufacturer will not be held liable for damage to persons or property attributable to failure to follow the
instructions and warnings listed below when installing and using the coffee machine.

7
R
G-10 CAPSULE GROUP
Intended use
Do not remove or disable any of the mechanical,
electrical or thermal protection mechanisms.
In case of emergency, (e.g. the machine catches fire
or becomes unusually hot or noisy), disconnect the
power immediately and close the water inlet tap.
If the machine is not going to be used for a
prolonged period of time, disconnect the power.
When disconnecting the power, pull the plug
rather than the cable.
When packed for storage, keep the machine in a
dry place with an ambient temperature of over
5ºC. Boxes may be stacked in piles of up to three
units of the same model. Do not place other
heavier packages on top of the box.
The machine is likely to be exposed to
temperatures below 0 ºC during handling and
transport, make sure that service personnel empty
the boiler and water system.The machine’s boiler
and water system is empty when delivered from
the factory.
To ensure fault-free machine operation, only use
replacement parts and accessories authorised by
the manufacturer.
This coffee machine has been designed and
manufactured to make espresso coffee and other
hot drinks, e.g. steaming and frothing milk . Do not
use it for any other purpose.
The machine is intended to be used by trained
personnel for preparing foodstuffs.
This machine is not intended for use in industrial
kitchens, domestic kitchens or similar locations.
The manufacturer will not be held liable for
damage to persons or property due to incorrect,
improper or negligent use by non-professional
personnel.
To ensure optimal performance, install the machine
in a location where these parameters will not be
exceeded:
- Maximum permissible inlet water pressure:
600 KPa (6 Bar)
- MINImum permissible inlet water pressure:
200 KPa (2 Bar)
- Maximum inlet water temperature: 40ºC
- Ambient temperature is between +10 ºC (min
and +40 ºC (max.).
Precautions
GENERAL
Before performing maintenance and/or moving the
machine, disconnect the machine from the power
supply and wait for it to cool.
Do not place vessels containing liquid on the
machine.
This appliance must not be cleaned with a pressure
washer.
Never immerse the machine, plug or mains cable in
water, as there is a danger of electric shock.
Do not touch the machine's hot surfaces or
dispensing equipment.
Do not touch the machine if your hands or feet are
wet.
Do not operate the machine if any part except the
dispensing equipment is wet.
Place the machine out of reach of children.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Cleaning and user maintenance shall not be made
by children.
Do not use the machine if the machine, its mains
cable or the plug is damaged or the machine has
been dropped.
Do not obstruct the vents with cloths or other
objects. Do not insert foreign objects into the vents.
Check the drain regularly to make sure that water
is emptied properly.

8R
G-10 CAPSULE GROUP
Data sheet
TECHNICAL SPECIFICATIONS
SPECIFICATIONS
MODEL
G-10 MINI CONTROL
2GR CAPSULE
G-10 DISPLAY CONTROL
2GR CAPSULE
Steam wand 1 unit 2 units
Hot water outlet 1 unit 1 unit
Turbo steamer No Optional
Temperature control Regulated by pressure switch Regulated by PID
Programmed via display No Yes
Height adjustable brewing system Yes Yes
Energy saving mode No Yes
Height, width, depth (mm) 530, 460, 590 530, 680, 590
Boiler volume (l) 6 11.5
Power supply 230V 1N~2740W 50/60 Hz 230V 1N~3340W 50/60 Hz
Water connection Female 3/8" thread Female 3/8" thread
Machine weight (kg) 40.00 54.00
Steam boiler operating pressure Between 0.8 and 1.2 bar Between 0.8 and 1.2 bar
Ambient noise < 70 db < 70 db
Used capsule drawer 40pcs 30+30pcs (2 drawers)
Capsule ejector chute Optional Optional
MODEL
55-cm inlet hose 150-cm drainage tube
MINI 2GR 1 unit 1 unit
2GR 1 unit 1 unit
Accessories

9
R
G-10 CAPSULE GROUP
Front view of the machine
OVERVIEW OF COMPONENTS
G-10 MINI CONTROL 2GR CAPSULE
Capsule group lever
Hot water tap
Button panel
Hot water outlet
Heater element lamp
Adjustable coffee
spout
Pump pressure gauge
Steam tap
Steam wand
ON/OFF switch
Boiler pressure
gauge
Capsule drawer

10 R
G-10 CAPSULE GROUP
Front view of the machine
OVERVIEW OF COMPONENTS
G-10 DISPLAY CONTROL 2GR CAPSULE
Hot water outlet
Hot water tap
Display
Capsule group lever
Button
panel
Steam tap
Steam wand
Pump pressure gauge
Turbo-Steamer wand
Adjustable coffee
spout
Capsule
drawers
Heater element lamp
ON/OFF switch

11
R
G-10 CAPSULE GROUP
DIMENSION SKETCH
G-10 MINI CONTROL 2GR CAPSULE
Model A B C D (Min.~ Max.) E
G-10 MINI 2Gr 530 mm 460 mm 590 mm 58 mm ~ 115 mm 680 mm
A
BC
D
E

12 R
G-10 CAPSULE GROUP
DIMENSION SKETCH
G-10 DISPLAY CONTROL 2GR CAPSULE
Model A B C D (Min.~ Max.) E
G-10 2Gr 530 mm 680 mm 590 mm 58 mm ~ 115 mm 680 mm
A
C
E
D
B

13
R
G-10 CAPSULE GROUP
TRANSPORT
Positioning
Install the machine on a level surface.Adjust the feet to
ensure that it dispenses coffee evenly in all of the cups.
Select a level, dry, strong and stable installation surface at
least 110 cm off the floor.
Leave enough space above and behind the machine to
ensure easy cleaning and maintenance.
Do not install the machine whilst wet or damp. If wet or
damp, leave the machine until completely dry then ask
service personnel to check that none of the electrical
components are affected.
Note:
Leave an air gap of approximately 30 cm above the
machine and 10 cm behind it to ensure ventilation.
Packaging
Delivery inspection
The machine is shipped in a unique carton box which uses expanded polystyrene paddings.
The machine box is provided with conventional symbols that can be perfectly visible during the handling and
storage tasks.
The machine box must stay in a vertical position during the transport. Do not tip or try to place the box
tilted sideways in any way.
During transportation the box must be protected from hits, impacts, shocks and exposure of bad weather
elements.
After the delivery, check that the machine is in the exact condition described in the documentation of the
transport, accessories included.
Check that the machine does not have any damage caused by transportation. If this happens, inform to the
shipper and the distributor of the machine.
The packaging materials are potentially dangerous and should be kept away from children.
Make sure to leave the materials of the box and packaging at a suitable recycling center.
INSTALLATION
i
MIN. 10 cm
MIN. 30 cm

14 R
G-10 CAPSULE GROUP
INSTALLATION
Connection types
Connect the machine as per the instructions on the ratings plate.
Machine: Supply
230Vac Ph+N
NEUTRAL
PHASE
Supply hose
Blue
Brown
Yellow/Green
230Vac Ph+N Machine: Supply
2Ph 230Vac
PHASE
PHASE
Supply hose
Blue
Brown
Yellow/Green
230Vac Ph+N
Machine: Supply
3Ph 230Vac
PHASE
Supply hose
Blue
Brown
Yellow/Green
230Vac 3Ph
Machine: Supply
230Vac Ph+N
NEUTRAL
PHASE
Supply hose
Blue
Brown
Yellow/Green
2Ph+N
Black
Machine: Supply
2Ph 380Vac+N
NEUTRAL
PHASE
Supply hose
Blue
Brown
Yellow/Green
2Ph+N
PHASE
Black
Machine: Supply
2Ph 230Vac
NEUTRAL
PHASE
Supply hose
Blue
Brown
Yellow/Green
2Ph+N
Black
Machine: Supply
3Ph 230Vac
PHASE
Supply hose
Blue
Brown
Yellow/Green
2Ph+N
Black PHASE
PHASE
Machine: Supply
125Vac Ph+N
NEUTRAL
PHASE
Supply hose
Blue
Brown
Yellow/Green
125Vac Ph+N
Machine: Supply
3Ph 380Vac+N
NEUTRAL
PHASE
Supply hose
Blue
Brown
Yellow/Green
380Vac 3Ph
Grey
Black PHASE
PHASE
Black
PHASE
PHASE
The coffee machine should only be connected to the power supply by qualied
personnel. The following safety instructions should be followed at all times:
Check that the electrical specications on the ratings plate match the specications
of the power supply at the point of installation.
The coffee machine must be connected to an earthed socket that complies with the
regulations in force in the country of installation.
You should protect the electric line of the installation with a circuit breaker switch
appropriated for the power consumption of the machine, specied on its ratings
plate.
A residual current circuit breaker must be installed in accordance with the
characteristics of the area of the installation.
Check the characteristics, power rating of the system and that the diameter of the
cables are suitable for the power used by the machine.
Do not connect the coffee machine to the power supply via extension boards,
adapters or shared sockets.
The manufacturer will not be held liable for damage to persons, animals or property
resulting from incorrect installation of the coffee machine.
Electrical connection
DANGER!
If the mains cable or plug is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualied persons in order to avoid SERIOUS INJURY OR DEATH!

15
R
G-10 CAPSULE GROUP
INSTALLATION
Pressure and temperature
Boiler temperature and pressure are directly related (see Fig. 01).
Machine is tted with a pressure gauge that will display the boiler pressure, if the machine is tted with a
display it will also indicate boiler temperature.
Standard pressure and temperature Fig. 01
Relationship between boiler pressure and temperature
Water connection
The Installation of the machine to a water mains connection must be done by a qualied person.
Rinse around 20 liters of water from the main water supply before connecting the machine to the water connection.
Connect the inlet hose that is assembled in the machine to the main water supply, which should have a
3/8” male connection tted with a shut-off valve, tighten it with a wrench.
Use safe drinking water with hardness between 5ºfH and 8ºfH (French hardness degrees). If the value is
below this limit, the presence of corrosion of hydraulic components is a possibility. If the value is higher
than this limit, the presence of lime in the boiler will increase. In both cases the operation of the machine
and coffee quality will be affected negatively.
If necessary, connect the machine to a water softener or remineraliser to reduce water hardness. Use the
exible hose that is included in the accessory box of the machine.
Connect one end of the corrugated tube to the drain cup in the machine, connect the other to the main
drainage tube at the installation area.
110
115
120
125
0.7 0.8 0.9 1.0 1.1 1.2
Important:
Only use the hoses supplied with the machine. Never reuse hoses.
Make sure that the drainage tube is not twisted and ensure that the entire tube is below the
level of the drain cup.
Starting the machine
Open the external supply of water to the machine.
Turn on the main power switch.
Press a drink button at the control panel on each group, wait
until water comes out continuously from each of them. This way
the heat exchangers in the machine will be correctly lled.
Open the steam tap to release the air trapped in the boiler.
The red lamp indicates that the boiler is heating. The lamp
switches off when the machine reaches operating temperature.
The machine is now ready to use.
BAR
OC

16 R
G-10 CAPSULE GROUP
CLEANING AND CARE
Rinse the group and porta-lter without detergent. (only using the membrane and hot water)
Clean the external surfaces of the machine, pay special attention to the stainless steel parts.
Clean the steam wand and the water tap. Be sure that the nozzles are not blocked or half blocked
with for example milk residue. If it’s necessary to clean, be careful not to deform or damage any of the
components.
Clean the dip tray and the stainless steel insert grid under running water with a brush. You can slowly
pour 1L of hot water into the drain cup to dissolve and remove coffee residue that have accumulated
inside the cup and tubes.
Clean the group’s gasket and shower plate (page 25).
Daily cleaning
Clean the brewing group and porta-lter with professional cleaning powder (page 24).
Weekly cleaning
Coffee machine cleaning
Important:
To obtain the best efciency, quality and performance of the machine, you should always follow the
cleaning and care instructions provided in this manual.
Turn off the power switch when cleaning the exterior of the machine.
All external surfaces should be cleaned with a wet cloth that will not get out bers, threads or scratch the
machine.
Do not use aggressive cleaning detergents, solvents or degreasers. They can damage the machine.
Important:
Once a day or after 8 hours from the last dispensing of coffee, the following cleaning tasks must be
performed for maintaining the quality and performance of the water system in the machine:
Brewing Group: Place the empty porta-lter (without coffee) in the group head and dispense hot
water for one minute.
Steam wand: Position the wand outside the drip tray and open the steam tap for around one minute.
Hot water outlet: Place a container under the water outlet and open the tap for 20 seconds.
Relling the boiler
This operation should be performed by service personnel following the steps listed below:
Switch off the machine and wait until the boiler has depressurised (leave the steam tap open until no more
steam emerges) and the water has cooled.
Open the boiler drain tap and wait until the boiler is completely empty.
To empty machines not fitted with a boiler drain tap, remove the anti-depression valve, pump the water
out of the boiler and then replace the anti-depression valve.
Switch on the machine to refill the boiler automatically.
Regular maintenance
Regenerating the water softener
To regenerate the water softener, follow the instructions in the user manual.
Important:
Make sure that the drainage tube is firmly connected to the drain, as the water in the boiler may
be extremely hot.

17
R
G-10 CAPSULE GROUP
CLEANING AND MAINTENANCE
Rinsing the capsule group
0403
01 02
iNote:
You can take a used coffee capsule and open it up and
remove the coffee powder inside to use in step 3.
Open the lever so the last used capsule
falls into the capsule drawer and the group
becomes empty.
Reopen the lever and put an empty capsule
without any cleaning agent in the group.
Push down the lever into locked position.
Start the continuous brewing and stop after
30 seconds. Repeat this process 3 times.
Push down the lever into locked position. Start
the continuous brew for 30 seconds. Repeat
this process 3 times.

18 R
G-10 CAPSULE GROUP
CLEANING AND MAINTENANCE
Cleaning the capsule group
01 02
03
i
Open the lever so the last used capsule falls
into the capsule drawer and the group becomes
empty. Fill half of the capsule group with special
cleaning powder for espresso machines.
Push down the lever into locked position.
Start the continuous brewing and stop after 20
seconds. Repeat this process 5 times.
Cleaning with powder
Note:
Only use professional cleaning
powder for espresso machines.
It’s avalible from your
distributor.
Open the lever so the last used capsule falls into
the capsule drawer and the group becomes empty.
Insert the special cleaning capsule, start the
continuous brewing and stop after 20 seconds.
Repeat this process 5 times.
Important:
Always rinse the group after a cleaning
procedure.
Important:
We recommend to clean and rinse the machine
at least once a week.
Cleaning with capsule
Part no: 1104162

19
R
G-10 CAPSULE GROUP
CLEANING AND MAINTENANCE
Disassemble the group gasket
Cleaning the group gasket and capsule holder
Reassembly the group gasket
I
O
01 02 03
Use your ngers to push the metal
tension ring backwards until it
releases from the gasket.
Once the metal ring had been
released, use your ngers/nails
to grab the gasket and pull it
straight out until it releases
from the capsule holder.
Switch off the machine and open
up the capsule group.
Important:
The widest part of
the gasket must be
facing forward when
reassembling the
gasket.
Clean the gasket and capsule
holder with a brush, clean the
gasket under a water tap with
running water.
1. Keep the group open by holding the lever with your hand, at the same time push the gasket into position on the
capsule holder. Push the lower part of the gasket on rst, then work your way all around until it is completely tted.
2. Pull the metal ring all the way up to keep the gasket in place.
0201

20 R
G-10 CAPSULE GROUP
CLEANING AND MAINTENANCE
Removing the adjustable spout
03 04
01 02
Pull down the spout to its lowest position.
Once in its lowest position, squeeze the hooks
on each side that hold the spout in place and pull
downwards.
Cleaning the adjustable spout
Remove the funnel inside the spout by pulling it
straight up.
Clean the two parts with a brush under running
water, reassembly the parts in reverse order.