Eyedro ILM.WIFI.1E.A Series User manual

Quick Start Guide
Inline Electricity Monitor
with Wi-Fi (2.4GHz) connectivity
Model: ILM.WIFI.1E.*A
Before Getting Started
This insert provides very high level installation instructions.
Complete installation instructions can be found at
eyedro.com/support
This product is intended for indoor use only
This product must only be used with ap-
proved inlet and outlet power cords and
must be properly rated for the application.
Current and/or voltage ratings of the device
or appliance being monitored (connected to
the outlet) must not exceed the ratings of the Eyedro Inline
Monitoring product.
Visit eyedro.com for any
questions or comments.
We value your feedback.
Online Support Resources
Visit eyedro.com/support for online product setup
wizard, user manuals, videos, and various support
resources
Limited One Year Warranty
Full warranty details are available in the Product
Guide at eyedro.com/support.
Important: This product contains no user serviceable
components. Do not attempt to open the case of the
unit or tamper with the internal components. Doing so
will void the product warranty.
eyedro.com/support

3.1 Attach the provided outlet power cord to the inline
monitor.
3.2 Connect the device or appliance to be monitored to
the receptacle side of the outlet adapter cord.
3.3 Attach the provided inlet power cord to the inline
monitor.
3.4 Plug the power cord into a wall receptacle and
proceed to step 4 (Connect Device to the Inter
net).
15A Model
(IEC 60320 C13)
15A Model
(IEC 60320 C14)
1. Verify Package Contents
2. Record Serial Number:
(located under barcode on module)
3. Install Hardware
_ _ _ - _ _ _ _ _
4. Connect Device to the Internet
4.1 If connecting by Ethernet, connect one end of the
supplied Ethernet cable to an open port on your router
and the other end to the Eyedro module. Ethernet
cable must be connected before powering device
4.2 If connecting by Wi-Fi (2.4GHz), use your computer
or mobile device to connect to the Wi-Fi network creat-
ed by your Eyedro: Eyedro [Serial#].
4.2.1 Open a browser tab and go to
eyedro.com/setup.
4.2.2 From the Wi-Fi Settings page, enter the name
(Network SSID) and password (Key) for the
Wi-Fi network in your building. Click Connect.
4.2.3 Reconnect your mobile device or computer to
the network that you just passed to your Eyedro.
5. Create a MyEyedro User Account
5.1 Go to my.eyedro.com to create your online
account (or log in if you have an existing account).
5.2 Add the device to your user account:
go to Configuration, select Devices then enter the
serial number you recorded in Step 2.
5.3 ENJOY! Log into MyEyedro as often as you like to
view your electricity consumption.
5.4 For more details about the MyEyedro cloud service,
review the MyEyedro User Guide located at
eyedro.com/support
Copyright © 2023, Eyedro Green Solutions Inc.
Quantity Description
A1Eyedro Inline Module (15A model
shown)
B1Inlet Power Cord (NEMA 5-15P to
IEC C13 shown)
C1Outlet Power Cord (IEC C14 to
NEMA 5-15R shown)
20A Model
20A Model