Eyeris ERV-L460N User manual

www.eyerisdigital.com
Installation and Operating
Instruction Manual
D-WDR VARY FOCAL DOME CAMERA
ERV-L460N
ERV-L460P
Thank you for your purchase of this product.
Before attempting to connect or operate this product, please read these instructions
completely.
Product specifications and its contents subject to change without any prior notice.
The picture is for reference, the object as the standard.
Page 1

CONTENTS
1. General Information
- Safety Precaution
- Package contents
2. Installation of Camera
- Camera Connection
- Installation of Camera
- Tips for Camera Location
- Dimension
3. Operation Guide
- Menu structure
- Function Description
4. Technical Specification
5. Troubleshooting
6. Cleaning and Care
7. Maintenance and Support
Page 2

1.General Information
>Safety Precaution
1.Read these instructions carefully before commissioning the camera in order to avoid
damages caused by improper installation or use.
2.Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handing or storage.
3.Use a dry cloth to clean the camera dome cover when dirty. When the dirt is hard to
remove, use a mild detergent and wipe gently. Then wipe off the remaining detergent
with a dry cloth.
4.Do not aim the camera at bright objects. Whether the camera is in use or not, never aim
it at the sun or other extremely bright objects. Otherwise, blooming or smears may be
caused.
5.In case of outdoor use, you have to install the camera in a suitable weather protection
case incl. heating element.
6.Operate the camera with the designated voltage only.
7.Use the camera at temperatures within -10 C to +50 C and humidity below 90%.
>Package Contents
1.D-WDR Vary Focal Dome Camera
2.Operating Instructions
3.Mounting Template Sticker
Caution
To Reduce the risk of electric shock, do not remove cover. No
user serviceable parts inside. Refer servicing to qualified
service personnel.
Page 3

2.Installation of Camera
>Camera Connections
12V DC Power Supply
Use standard 12V DC output power supply with 2.1mm
standard DC power female pin. Before connect power check
power supply polarity (+ and -).
Video Output Connection
Use standard 75 Male BNC pin terminate with Co-axial video cable then connect to
camera video out BNC Female pin.
>Installation of Camera
Mounting Template Sticker: The mentioned technical drawing is for reference only.
Actual size of Mounting Template Sticker is matched with Dome Base. Stick Mounting
Template Sticker supplied for drilling the mounting hole on the mounting surface.
>Tips for Camera Location
1. Never expose the camera to direct sunlight without additional camera housing. Keep
sufficient distance to direct heat sources.
2. Never install the camera at humid, oily or dusty locations without using an additional
housing. (Without additional housing the camera is not suitable for outdoor use)
3. Do not aim the camera towards indoor lighting, the windows, the sunlight or the sky.
(To get good pictures, camera and light should be aimed towards the object)
4. Avoid peak light as background (Also caused by reflection)

Page 4

>Dimension
Page 5

>Menu Structure
3. Operation Guide :
EXPOSURE
LENS
SETUP MENU WHITE BALANCE
DAY NIGHT
3-DNR
SPECIAL
RESET
EXIT
FACTORY
ADJUSTMENT
DC
HIGH
OFF
VIDEO
LOW
MANUAL
OFF
INDOOR
FREEZE
AUTO
HSBLC
OFF
D-ZOOM
GAMMA
NEG-IMAGE
BLC
OUTDOOR
MIRROR
OFF
MIDDLE
SHUTTER
BLC
SENS-UP
D-WDR
AGC
BRIGHTNESS
ATW
AWC
INDOOR
MANUAL
OUTDOOR
AWB
ON
OFF
COLOR
AUTO
B/W
EXT
OFF
V-FLIP
ROTATE
MIRROR
CAM TITLE
SHARPNESS SHARPNESS
RS-485
RED RED
PRIVACY
MOTION
FACTORY
SYNC
LANGUAGE
D-EFFECT
BLUE BLUE
4-ZONE
8-ZONE
Page 6

>Function Description
1. Lens : Three Mode - DC, Manual and video
2. Electronic Shutter : 4 Mode - FLK, Fixed, Manual and Auto.
1/100 or 1/120 @ FLK
1/50,1/250,1/500, 1/1000, 1/2000, 1/4000,
1/10000, 1/100000 @ Fixed
Brightness : Can set level from 0 to 100.
AGC (Auto Gain Control) : Three level High, Middle, Low.
BLC (Back Light Composition) : Three level BLC/HSBLC/OFF
BLC : Can be set On/Off with 64 selectable zones.
HSBLC : Can be set On/Off with 64 selectable zones.
SENS-UP : Can be set Off/Auto with X2, X4, X8, X16, X32,
X64, X128, X256
D-DWR : 3 Mode- OFF, Indoor, Outdoor
3. WB (White Balance) : 6 Mode - ATW, AWB, AWC ->SET, MANUAL,
Indoor, Outdoor.
4. Day Night : 4 Mode : Color, Auto, B/W, EXT
5. 3- DNR : ON/OFF
6. Special:
Camera Title : A TO Z, 0 TO 9, & etc. You can set position of ID.
D-Effect:
Freeze : ON/OFF
Mirror : 4 Mode- OFF, Mirror, V-Flip, Rotate
D-Zoom : Set up to 32X with PAN and Tilt
Gamma : Can be adjust within the range from 0.0 to 1.0
Negative Image : OFF/ON
Motion : OFF/ON with 4 selectable zone with sensitivity level
Privacy : OFF/ON with 8 selectable zone.
Language : 4 Selectable Languages.
7.Adjustment : 3 Mode
Sharpness : Can be adjust within the range from 0 to 100
Blue : Can be adjust within the range from 0 to 100
Red : Can be adjust within the range from 0 to 100
8.Reset : Factory
9.Exit
Page 7

4. Technical Specification
Video
ERV-L460N
NTSC
ERV-L460P
PAL
Model Number
CCD
Signal System
1/3" SONY Super HAD II CCD
Lens 2.8 to 11mm IR Enable DC Auto IRIS
Effective Pixel
Horizontal Resolution 600 TVL
768 x 494
15.734KHz
59.94KHz
752 x 582
15.625KHz
50Hz
Min Illumination@ Night
Min Illumination@ Day
0.005Lux
0.01Lux
Gamma
Scanning Frequency (V)
Scanning Frequency (H)
0.45 Adjustable
S/N Ratio More than 48db
Video Output 1V p-p, 75
Operational
Sync System 2:1 Internal
Exposure Mode
Lens
Anti-Flicker/Manual/Fixed
DC / Manual
AUTO AUTO
FLK 1/120 FLK 1/100
Fixed 1/60~1/100,000sec Fixed 1/50~1/100,000sec
High / Medium / Low
AGC
Shutter Speed
Privacy Masking
Motion Detection
Mirror
Day/Night Mode
D-WDR
BLC
On /Off, Supports upto 4 Zone
On /Off, Supports upto 64 Zone
ON/OFF
Auto / Color / B/W / Ext
Off / Indoor / Outdoor
Off / BLC / HSBLC
SENS-UP
Languages
x2/x4/x8/x16/x32/x64/x128/x256
4 Language Support
D Effect
Camera Name
3 DNR
White Balance
Freeze/Mirror/D-Zoom/Gamma/Nega Image
Yes, A to Z, 0 to 9, & etc
ON/OFF
ATW/AWB/MANUAl/FIXED/AWC-SET
Page 8

Electrical
Contrast, Sharpness, Hue, saturation
Color Control
Current Consumption
Power Supply
100mA
12V DC Standard ±10%
Lighting Protection 3000 V
Environmental
Operating Temperature -10°C ~ 50°C
2 Axis 4" Plastic Dome
300g
Dimensional
Humidity 95%
Dimension
Weight
Housing
ǿ 115* H 90 mm
5. Troubleshooting
Error Cause
No Picture Check supply voltage, check power cable and video cable
The picture is noisy Insufficient light (Properly adjusted to the camera)
The picture is too bright Too much peak light, change camera location or active back
light function of the camera
The picture is not sharp Lens focus not adjusted properly
The picture is distorted Different GND potentials between camera and monitor (Bad
connection)
Ghost Image Wrong 75 termination, shield of video cable interrupted.
Page 9

6.Cleaning and Care
-Before you start to clean the camera body, disconnect the unit from power supply.
-For reasons of electrical safety never clean the camera with water or other liquid
matters and never put the camera under water.
-To clean use a soft dry cloth. Cleaning the camera inside is strictly forbidden and may
only be done by your authorized dealer.
-Since all camera functions are self adjusting and the camera does not contain any
parts or components that are subject to wear. We advice you not to open the camera
(except for the flap for settings), unless the camera appears to be defective.
Page 10
7. Maintenance and Support
1. How to request after-sale service?
When ever you want to send repairing material back to us kindly use
the same Channel where u purchased the material must with Return Material
Authorization (RMA) Form download from our website.
http://www.eyerisdigital.com/RMA%20Form.pdf
2. Following cases should be paid even within the warranty period.
A)When defects are caused by the careless handling of the user.
B)When improper or unauthorized repairs are done or when the inside is modified or
damaged.
C)Defects caused by natural disaster or power problem.
Technical Support: For any type of product operating, Function, Installation related
queries or want to know more about our product details specification or function,
contact our website or E-mail to us.
http://www.eyerisdigital.com/support.html
www.eyerisdigital.com