Ezviz S1 User manual
8'/%$
Quick Start Guide
Please read the quick start guide carefully and keep it properly.
4
Table of Contents
6
Packing List
Camera Appearance
Operation
EZVIZ SPORTS APP
S1 Features
S1 Connects to Display
Appendix Modes Description
Appendix Parameters Description
Restricted substances or elements
identification
S1 Remote Control
Appearance
Main Menu
Operation
5
Open the packet and check whether the S1
sports camera (Hereinafter referred to as S1)
and all accessoriess is in good condition.
S1 X1
Power Adaptor X1 Quick Start Guide X1
USB Data Cable X1
Packing List
6
1
2
4
3
5
6
7
8
9
11
10
13
12
14
Appearance Description
7
1Shutter Start/Stop Shooting
2Camera Status
Indicator
Blue steady: Standby;
Flicker: Camera is on.
3MIC Audio Input
4Lens 152°Wide Angel
5Red light steady when charging.
Red light off when fully charged.
6USB Port USB data trasfer
Micro SD Card Recommendation
7
8micro HDMI HDMI Output
9
10
11
12
13
14
Power Button Press and hold for 1 second to
power on, 3 seconds to power
off.
Reset Reset button.
Wi-Fi
Indicator
Purple filcker: Wi-Fi is turning
on.Blue Flicker: Wi-Fi is on.
Wi-Fi On/Off
Button
Press and hold 3 seconds to
switch the Wi-Fi on or off.
Interface to all brackets.
Standard Bracket
Interface(1/4 inch)
Buzzer Audio Alert
70
5
705
705
70
5
Micro SD
Card Slot
Power Camera
Indicator
8
Step 1
Micro SD Card Recommendation
Insert the micro SD card into the card slot.
Insert micro SD card.
Operation
9
Step 2
Use the USB cable to charge. When the power
indicator goes off, the power is fully charged.
Press the for one second, and you will hear
the buzzer alerts 5 times. The indicator blinks in
purple. When the indicator turns steady blue, the
S1 is power-on and standby.
You are recommended to fully charge the S1
when it is the first time you use it.
Press the power button and the Wi-Fi
button at the same time to restore the
default settings.
Power on the camera.
Connect the power cable.
Power on the camera.
10
Step 3
Press record button once,the camera starts
recording, and the camera indicator flickers in
blue.
Press record button, the camera stops
recording, and the camera indicator is on
You can choose to switch record, capture,
burst snapshot with EZVIZ SPORTS App.
If no operation with in 120 seconds, the S1
camera shuts down automatically.
Start Recording
Start recording.
Stop recording.
11
Step4
You can connect to the S1 to the display to vide the
video and picture.
Connect the S1 camera and the display with a HDMI
wire. Press the the power button and the record
button at the same time and then you can view
the video and picture stored on the micro SD card on
the display.
Display
HDMI Cable
mini HDMI Interface
Connect to the display.
12
Download and install the EZVIZ App, you can
get the live video, playback and control the
camera.
Use the mobile phone to scan the QR code or
search in the App Store to download the EZVIZ
SPORTS App.
Download EZVIZ SPORTS App.
EZVIZ SPORTS APP
13
Press the Wi-Fi button for 3 seconds. When the
status indicator flickers in blue, the Wi-Fi is on.
Turn on the Wi-Fi of your mobile phone.
Default Wi-Fi Name: EZVIZ_XXXX
Default Wi-Fi Password: 1234567890
You can change the Wi-Fi password and
name of the camera with the app.
After restore default settings, the Wi-Fi name
and Wi-Fi password are restored to default.
Turn on Wi-Fi of the S1 camera.
Connect the Wi-Fi of the camera and your phone.
14
5HFRUG 7DNH3KRWR 6KDUH …
Open EZVIZ SPORTS App. You can set the
parameters as you requested.
After configuration, you can use the App to record,
take photo, share your video and so on.
What you can do with EZVIZ SPORTS
S1
16
S1 Remote Control
User Manual
1
2
3
4
5
6
1Display OLED Display
2Power
Indicator
Red steady when charging;
Blue steady when fully charged.
3Return
/Set Button
Press to enter setting interface of the
current function˗
When in the sub-menu, press to
return upper level menu.
4Sensor UV Sensor
5Switch
Button
Switch to next mode or
parameters
6Power Button
/OK Button
Press to power on; press and
hold for 3 seconds to power off˗
When setting, press to enter.
7USB Port
External power supply (you can use
the USB cable and power adaptor
of S1.)
7
17
Appearance
Description
1280-60
38:35/59:42
1
2
3
5
4
6
1S1 Current Mode
2
The first number indicates the resolution of video
or photo. TheC second is the capture speed and
delay interval.
3Time already recorded and time left for recording/
Captured picture and picture number left for photo
4
6Apprears when bluetooth is connected.
5
S1 Current Battery
Looping (Appears only in recording
mode.)
:Recording
:Burst
:Photo
:Delay capture
GUI Description
See Appendix for detailed main menu modes
descripion.
18
OSD Description
Use the USB port to charge the battert, when the
power indicator goes steady blue, the battery is
fully charged. The battery life is 30 days.
Press , the remote is on. EZVIZ logo, verision,
battery, bluetooth and S1 status will be displayed.
Buttons are invalid when the remote is
starting up.
The remote shuts down automatically if it is
not connected to the S1 in 30 seconds.
V1.2.2
BLUETOOTH
REMOTE
BLUETOOTH
CONNECTED
S1 POWER ONLO A DI NG . . .
19
Connect the power
Start up the remote
Operation
Table of contents
Other Ezviz Camcorder manuals
