EzwatchPro SKU# IR CAMERA WATERPROOF BULLET B/W CAMERA 8 INFRARED... User manual

FRONT VIEW
SIDE VIEW
REAR VIEW
DIGITAL VIDEO CAMERA
User's Manual
SKU# IRCAMERA
SKU# IRCAMERA
WATERPROOF BULLET B/W CAMERA
8 I FRARED LED's
• Suggested mounting height 8'-12'
• Do not mount c mer directly to met l surf ce
• Do not point c mer directly into light sources
• Do not point c mer directly into light sources
WAR I G
Im ge Sensor 1/3" CCD
WAR I G
Attention:
To reduce the d nger of electric shock, ple se do not open the c se (or b ck
cover) of c mer ; everything needed for user oper tion is on the surf ce of
the c mer ; ple se seek help from qu lified profession l for rep ir.
Im ge Sensor 1/3" CCD
Effective Pixels PAL:500(H)x582(V) NTSC:510(H)x492(V)
Sensor re 4.9mmx3.7mm
Sign l system PAL/NTSC
Horizont l resolution 420TVL
Minimum illumin tion 0Lux(IR LED ON)
Electronic shutter Auto:1/50(1/60)-1/100,000Sec
Attention items:
• Do not touch CCD or lens
• Do not use ny unidentified power supply
• Avoid inst ll tion in unst ble pl ces
the c mer ; ple se seek help from qu lified profession l for rep ir.
Electronic shutter Auto:1/50(1/60)-1/100,000Sec
S/N r tio >48dB
G mm 0.45
Lens 3.6mm
Video output 1.0Vp-p, 75
Ω
IR w ve length 850nm
Power supply DV 12V±10%
• Avoid inst ll tion in unst ble pl ces
Temper ture: -20⁰C/+50⁰C
Power supply DV 12V±10%
Power consumption less th n 3.0W
IR dist nce 25-30M
• Do not use c mer in the following conditions,

M king BNC Connection
Connecting Pre-m de C ble
Step 1: Strip w y ll of the c ble nd shielding so
you h ve 1/2" of the center conductor exposed s
shown in the picture.
Connect this end to
the c mer .
Step 2: Then strip w y the bl ck outer j cket so
you h ve 1/4" of the shielding exposed. Do not
The c bles re l beled with yellow wr p det iling the c mer end
nd the DVR end.
It is very important that you identify these ends
you h ve 1/4" of the shielding exposed. Do not
llow ny of the copper shielding to touch the
center conductor.
Step 3: Insert the c ble into the fitting nd gently
find the hole for the center conductor before you
nd the DVR end.
It is very important that you identify these ends
before installing the cable so that you have the correct ends at the
correct location.
find the hole for the center conductor before you
press the fitting onto the wire. Now just twist the
fitting onto the wire while firmly pressing down
until the fitting is firmly on the c ble.
Inst lling power wire pigt il
Cont ct
Step 1: At the c mer loc tion, t ke the power
c ble nd strip w y the outer she thing to
expose the inner two wires (bl ck & red). Then
strip w y bout 1/4" of the wires j cket to
expose the copper wire. Do the s me to the
power wire pigt il which connects to the c mer
EZWATCHPRO
www.ezw tch-security-c mer s.com
Phone/Fax
Technical Support/Sales
power wire pigt il which connects to the c mer
power connection s shown. Note: Do not strip or
cut the power le d coming directly from the
c mer . You should strip the "pigt il" power
c ble which c me with your kit. You should h ve
one "pigt il" for e ch c mer .
Technical Support/Sales
Toll Free 1-866-241-3400
Intern tion l 001-801-4783980
F x 1-801-295-2191
Mail
Step 2: Now t ke the red power c ble le d nd
twist it together with the bl ck & white le d from
the power pigt il. Now t ke the bl ck le d from
the power c ble nd twist it together with the ll
bl ck le d from the pigt il. Use the gr y wire nuts
provided with your system nd twist them onto
Mail
Main Office/Mailing Address
Autom ted Video Systems
1600 S. St te Street
S lt L ke City, UT 84115
provided with your system nd twist them onto
the wires until they re firmly secured.