Falcon BT1311 User manual

Falcon Enterprises
17150 Via Del Campo, Ste 206
San Diego, CA 92127
866-450-8932 (tel) • 858-408-4571 (fax) • [e-mail] • http://falconkeyboard.com
1
Model: BT1311
Operation Manual R17
I. Quick Start
What is in the Box?
•Bluetooth keyboard with 'falcon™' mouse
•Universal Serial Bus (USB) charging cable (standard USB to micro USB)
•Operation Manual with Quick Start instructions
Welcome: Thanks for purchasing a full-size Bluetooth multi-platform keyboard with thumb
controlled falcon™ (optical mouse in the spacebar and finger tip activation buttons) on board.
You are invited to read this Operation Manual to get the most from this new keyboard. This
Operation Manual is also available for download at falconkeyboard.com.
LEDS:
F1 F2 F3
Micro USB
Charging Port
Power
Right Click
Optical
Mouse
Activation Keys
Sync Switch
Left Click
Up Dn
LEDS:
CAPS Num Power Sync
2
Getting Started
•Charging the Battery
Charge the internal battery from a standard powered USB port (PC or powered USB hub) or mobile
device power source not exceeding 5.0 VDC, using the USB charging cable provided with your
keyboard, through the micro USB charging port until red battery light turns green.
•Synching with your falcon™ keyboard with your Bluetooth device
!
This multi-platform keyboard, is capable of being operated with any personal computer (PC),
iPAD, iPhone, Android or Windows Phone or Tablet equipped with Bluetooth chip set. The synced
device must support the “Bluetooth HID” (Human Interface Design) profile. Microsoft Windows,
Android, OSX and iOS should work whereas the Blackberry will not.
If you plan to have more than one device synced (or paired) to the same keyboard, select Fn+F1,
F2 or F3 before starting the syncing operation so you can assign that device to the appropriate
channel (F1, F2 or F3). Note: F1 is the default channel and the first device will be paired using that
channel if a channel is not selected. The blue LED above the F1, F2 or F3 (determined by channel
in use) key should slowly flash to indicate when the keyboard is connected.
Synching with your iPAD, iPhone, iMac, or other Apple device:
Use the following steps to sync the keyboard:
1. Turn on your keyboard using the upper left hand Power button.
2. Turn on the Apple device to be paired. Open System Preferences (OSX) or Settings (iOS)
on the Apple device.
3. Select (click on or touch select) Bluetooth.
4. Turn Bluetooth on (button turns green in iOS).
5. Press the “Sync” switch on the upper right hand corner of the keyboard.
6. The blue “Bluetooth” LED should start flashing indicating that it is “Now Discoverable”.
7. “FALCON” should show up under the Devices listed on the Bluetooth Devices screen with
the notation “Not Paired” (iOS) or “Pair” (OSX).
8. Select (click on or touch select) “FALCON” (iOS) or “Pair” (OSX).
9. A “Bluetooth Pairing Request” will appear with a 4 or 6 digit number along with the words
“Enter the code “XXXX” on “FALCON” followed by the RETURN or ENTER key”.
10. Type the number on your keyboard in the primary number line on the QWERTY portion of
the keyboard only and then press “Enter”. Be sure to press “Enter” to complete syncing.
The keyboard blue “Bluetooth” LED should turn solid to indicate it has paired successfully
with the Apple device.
Once paired, the notation on the Bluetooth Devices screen should change to “Connected”. The
keyboard should remain paired and connect automatically when used with that Apple Device. There
may be a slight delay in connecting on subsequent uses if the keyboard is not constantly in use or
the Apple device goes to sleep or is powered down.
Note: The falcon™ on board will not provide cursor pointing action with a unit that does not
support cursor movement (iPhone or iPad).

3
Syncing or Pairing to an Android Device (Phone or Tablet): Use the following steps to sync the
keyboard:
1. Turn on your keyboard using the upper left hand Power button.
2. Turn on the Android device to be paired.
3. Go to “Settings” on the Apps screen of the Android Device.
4. Under “Settings”, turn on “Bluetooth”, and select the “Bluetooth” App. Then select “Search
for Devices”.
5. Press the “Sync” switch on the upper right hand corner of the keyboard. The blue
“Bluetooth” LED should start flashing.
6. When the Android device displays “Available Devices, touch to pair”… Touch the screen.
7. A 4 or 6 digit number will appear. Type that number on your keyboard, in the primary
number line on the QWERTY portion of the keyboard only, and then press “Enter”. Be sure
to press “Enter” to complete syncing. The keyboard blue “Bluetooth” LED should turn solid
to indicate it has paired successfully with the Android device.
Once paired, the notation on the Bluetooth Devices screen should change to “Paired”. The keyboard
should remain paired and connect automatically when used with that Android device. There may be
a slight delay in connecting on subsequent uses if the keyboard is not constantly in use or the
Android device goes to sleep or is powered down.
Syncing or Pairing with a Windows Laptop or Desktop Computer or Windows Phone:
The specific method to sync the keyboard depends on the Bluetooth implementation installed on
your device. For Bluetooth adapters (dongles) with third party Bluetooth software, follow the
instructions for your software version. For factory installed Bluetooth follow the help instructions
for your version of Windows. In general, the steps to follow are:
1. Turn on your keyboard using the upper left hand Power button
2. Turn on the Windows device to be paired.
3. Open the Bluetooth control panel or the Device and Printer control panel depending on the
implementation on your PC.
4. Select “Search for Devices”.
5. Press the “sync” button on the upper right hand corner of the keyboard. The “sync” LED
should start flashing.
6. When the Bluetooth control panel or the Device and Printer control panel displays
“FALCON” or a new device appears, select the appropriate item.
7. In the window that opens, click on the “Connect” button.
8. A 4 or 6 digit number will appear. Type that number on your keyboard, in the primary
number line on the QWERTY portion of the keyboard only, and then press “Enter”. Be sure
to press “Enter” to complete syncing. The keyboard blue “Bluetooth” LED should turn solid
to indicate it has paired successfully with the Windows device.
Once paired, the status on the Bluetooth Devices screen should change to “Connected”. The
keyboard should remain paired and connect automatically when used with that Windows device.
There may be a slight delay in connecting on subsequent uses if the keyboard is not constantly in
use or the Windows device goes to sleep or is powered down.
4
II. Operating Instructions
LED Displays:
.
•F1, F2, F3 LED’s flash blue when sync channel is in use (only one will blink at a time
indicating the keyboard is connected to a device).
•Caps LED at top edge of keyboard shows green when CAP Lock key has been depressed
and keyboard is active and connected to a device.
•Num LED at top edge of keyboard shows green when Num lk key has been depressed and
the keypad is active and connected to a device.
•Power LED flashes red to show low battery.
•Power LED flickers green 3 times when starting up.
•Power LED flickers green periodically when keyboard is working.
•Bluetooth LED flashes blue when keyboard is in sync mode and is available for syncing to a
device.
•Bluetooth LED is sold blue when the keyboard has successfully synced with another device
during sync operations.
•Bluetooth LED is off during normal operation.
Falcon™ Specifications, Certifications and Limited Warranty:
See Appendix A for Specifications.
See Appendix B for Certifications.
See Appendix C for Limited Warranty
Problems syncing with devices:
See Appendix C for devices without built in Bluetooth for advice on Bluetooth adapters (dongles)
and additional troubleshooting advice for solving problems syncing.
Problems with Waking up a Desktop PC or Mac:
See Appendix D for advice for waking up a Desktop PC or Mac.
Two-touch Switching Between PC, Tablet, and Smart phone:
•By pressing just two keys you can instantly switch between typing an email on your
Windows PC, taking notes on your Apple iPad or replying to a text on your Android smart
phone. This keyboard lets you create and communicate more easily on more devices.
•If the 3 devices have all paired successfully, you can press Fn+F1, Fn+F2, or Fn+F3 to
switch from one device to another.

5
Post Syncing Operation:
•If the keyboard turns off during periods of non-use, it can be awakened by pressing any key.
The keyboard will become active again after the keyboard re-connects. An active connection
is indicated by the flashing F1, F2 or F3 LED depending upon which sync channel is in use.
•If the keyboard is turned off, it should reconnect automaticly when it is turned on again.
•Use the "Bluetooth" Control Panel, Device and Printer, Settings, or System Preferences
screen to remove any unwanted pairings if interference with them is occurring.
falcon™ Operation:
•The falcon™is a built-in Optical Mouse that allows the user to move the cursor on the
monitor almost identical to using a normal mouse. Instead of moving the mouse over a
surface to move the cursor, the edge of the thumb or tip of a finger, is moved over the 'lens'
in the space bar to move the cursor. By moving the edge of the right or left thumb over the
cursor port at the space bar, the cursor is moved.
•The Optical Mouse along with the four small white Activation Keys are used to perform the
exact same functions provided by a normal computer mouse (Left click, Right click, Scroll
up, Scroll down, etc.).
•When the cursor is over the spot desired, that item can be activated by using the index finger
of the right hand to press the small white key just above the "H" key (Left Click). The
middle finger can be used on the small white key just above the "J" key (Right Click) to pull
down menus. Scroll up and down can be operated with the left hand index and middle finger
respectively on the small white keys just above the "D" and "F" keys. By holding down both
the Left and Right Click buttons, the thumb can be used to rotate an object (CAD use) on the
monitor. By holding down both the up and down scroll buttons, the thumb can be used to
zoom the object.
NOTE: The software application being used on the connected device has to have the
zooming or rotation feature for it to work with the falcon™.
Right or Left Hand:
•The activation keys can be set for either right or left hand operation. Normally, the right two
activation keys mimic the left-right click keys on a normal mouse. The left two activation
keys provide scroll up and down operation. The activation keys can be reversed by pressing
Fn+R+L at the same time. Pressing Fn+R+L again returns to normal.
•A new right hand user of the falcon™may find it easier to use the Left Hand Keyboard
Operation setup so that the left hand can be used for Left and Right click while the right
hand thumb is used to move the cursor without worrying about the right hand finger
activation of selection keys.
6
Helpful Hints:
•The use of a mouse, thumb pad, or track ball is habit forming. To get the most from the
falcon™, hide your mouse where it cannot be reached and disable the track ball or thumb
pad. You will have to form a new habit in the use of your thumb or finger tip to become
proficient with the falcon™ and avoid reaching for the mouse or thumb pad every time you
want to move the cursor.
•A right handed beginner may find that it is easier to have the left hand operate the select and
pull down activation keys rather than doing it with the right hand as the thumb is
maneuvering the cursor. Press Fn+L+R at the same time to switch back and forth for left or
right hand operation.
•Either the edge of the right or left thumb or a finger tip moving horizontally over the space
bar mouse lens can be used to move the cursor.
•The LEDs located above F1, F2, F3 flash blue when paired successfully with a Bluetooth
component. If up to three devices have been paired successfully, you can press Fn+F1,
Fn+F2, or Fn+F3 to switch from one device to another.
•Precise location of the cursor on the monitor can be assisted by varying the DPI (dots per
inch-the accuracy of the picture being taken). Changing from 400, 600, or 1200 DPI is
performed by pressing Fn + S together. Repeating Fn + S steps through each DPI setting in
order. A very slight movement of the thumb or finger on the lens can show the change in
movement speed from one DPI step to the next.
•If the keyboard goes to sleep during periods of non-use, it can be restated by pressing any
key.
•If the keyboard is turned off by pressing the Power Key or if the Battery is discharged, the
keyboard should reconnect automatically when it is turned on again (after recharging the
battery if necessary).

7
III. Bluetooth Syncing Problems
Device syncing (pairing or connecting) with falcon™
Usually syncing (also called Pairing or Connecting by some operating systems) the falcon™to
your computer, tablet or smart phone is accomplished very easily following the instructions above
or on the FAQ page of FalconKeyboard.com. If you have difficulty syncing your keyboard to one
or more devices please read the advice below. Since difficulty syncing is more often a problem with
older Windows PC, this advice is written for the Windows 7 operating system.
Failure of Bluetooth Syncing:When syncing (pairing or connecting) is not occurring, the ‘num
lock’, ‘caps lock’ lights will not come on, the F1, 2 or 3 blue LEDs do not flash, and the optical
mouse and keys, do not work. Even if the Falcon icon on the 'Device and Printer' screen (or
equivalent control panel) shows a symbol such as a Green Arrow, the devices may not be synced
unless the device status shows that the devices are paired or connected. The green arrow only shows
that the computer is recognizing that the computer's Bluetooth (internal or external dongle) is active
and it 'sees' the falconTM. It does not guarantee syncing has occurred. Failure to sync can occur if
on entering the pairing code (4 or 6 digits generated by the device control panel) the 'enter' key is
not pressed before the falconTM sync period times out. The wrong device may also be selected for
synching or the installed Bluetooth may not be compatible with the falconTM keyboard. Windows
operating systems sometimes also have difficulty locating and loading the correct driver for the
Bluetooth device causing a failure to connect when the falcon™ Bluetooth sync period times out.
Bluetooth Dongles: If your device does not have ‘built-in’ Bluetooth, you will have to purchase
and install a Bluetooth adapter or “dongle” which is inserted in an available USB port and usually
requires additional software to download and install. The Bluetooth version installed on the
falconTM keyboard is supposed to be compatible with Bluetooth versions 2.0 through 4.0, however,
not all dongles work on all devices. Falcon Enterprises tested several dongles, and found that some
would work on some older PCs and laptops, but not on others. This prevents us from saying 'use
this one'. Providing a dongle with each falconTM was considered, but there was no way to tell if
they would work on every device. The newer tablets, smart phones, and new PCs work fine as they
are more likely to have ‘built-in’ Bluetooth installed. A test group of 25 individuals with different
kinds of computers, tablets and smart phones, ran tests on the falconTM, and none of them reported
problems syncing.
Syncing Check List:!!If you are having a problem with syncing, here are some things you can try.
1. On the falconTM keyboard, press the power button (upper left corner) making sure that
the green power light flashes on upper right keyboard edge, and that the keyboard is
charged (if a red power light shows, recharge the keyboard first).
2. Make sure that other Bluetooth components are shut off just in case they are interfering
with the falconTM syncing.
3. If you have Bluetooth devices listed on the ‘Devices and Printers’ or third party
Bluetooth control panel which are not connected or no longer in use with your PC,
remove them from the available device list.
8
4. Try restarting your PC and attempt to sync the falcon™ without as many applications
running.
5. Make sure that a wireless 2.4 GHz keyboard or mouse is shut off to avoid interference.
6. Check to see if the falcon™ will sync with other units. If it does, the board is functional.
It is down to finding the right dongle match for your equipment.
7. Try a Bluetooth version 3.0 dongle rather than Bluetooth 4.0. The falconTM is designed
to sync with Bluetooth 4.0 and previous versions (3.0, or even 2.0), however, not all
PC’s are compatible with version 4.0 or higher.
Syncing Instructions for PC: If syncing is still not successful, use the following steps for re-
syncing a Windows PC after turning the falcon™ on:
1. Restart your Windows computer. Ensure no applications are running which would slow
down your computer excessively. Install or reinstall third party Bluetooth software if
using a Bluetooth adapter (dongle).
2. Go to your Windows ‘Start’ button on your PC and select 'Devices and Printers'. If you
have third party Bluetooth software installed, start it or open its control panel. If the
'falcon™' icon is showing, click on it and select 'remove device'. This allows syncing to
be restarted.
3. Press Fn+F1, F2 or F3 keys at the same time on the falcon™ keyboard. This tells the
board that you want F1 to be the sync connection linked with your computer. (or F2 or
F3, your choice)
4. Now, on the 'Devices and Printers' screen, select 'Add a Device' or perform the equivalent
action on the third party Bluetooth control panel.
5. Press the sync button on the upper right corner of the falconTM keyboard until the blue
light flashes. If the 'search' is successful, the 'falcon™' icon should show up on the
‘Devices and Printers’ screen or Bluetooth control panel. The presence of the falcon™
icon only means that the device has been identified, it does not mean that it is synced
as yet.
6. Select the falcon icon and select 'next' on the ‘Devices and Printers’ screen or ‘pair’ or
‘connect’ depending on the Bluetooth software installed.
7. Instructions for typing in the sync or pair code (4 or 6 digit number) should be provided--
these have to be typed into the falcon™ keyboard and the falcon™ keyboard 'enter' key
pressed. Be sure to enter the pair code in the primary number line on the QWERTY
portion of the keyboard only, not the number pad, and then press “Enter”. Be sure to
press “Enter” to complete syncing. The keyboard blue “Bluetooth” LED should turn solid
to indicate it has paired successfully with the Windows PC.
8. It may take a few moments for the syncing to be finished. Be patient while the device
driver software is installed. If your device syncs successfully, the caps lock and num lock
lights should now be active--and the F1 (or F2, or F3) blue light will flash every so often
to show which connection is active. The mouse and keys will be active as well.
9. If the above steps are not successful, repeat the instructions once or twice more. We have
yet to have a keyboard board fail to sync as long as the PC is compatible with Bluetooth
or has a functioning Bluetooth dongle.

9
Tablets and Smart Phones: The above hints are similar for a tablet and a smart phone. It is hoped
that the rest of your learning period with the falconTM is successful.
10
IV. My Keyboard will not wake up my
Desktop PC
Your device’s wakeup response to the falcon™ depends on the device and whether it has built-in
Bluetooth or uses a Bluetooth adapter (dongle).
Sleep mode is an issue with a Windows PC when using a Bluetooth adapter (dongle) as opposed
to built-in Bluetooth. The PC’s BIOS controls prevent a device connected through a Bluetooth
adapter from waking up the PC.
Your options are:
If your device is a Laptop or has a touch screen, you can always wake it up from the built-in
keyboard/trackpad or by touching the screen.
Momentarily press the Power Button to wake up the computer (don’t press too long or it will go
into the shutdown mode).
Turn off the sleep mode in the Power Options control panel. The Display monitor can still be set
to go to sleep if desired.
Keep a separate USB mouse connected and use it to wake up the computer when needed.
If you have a Windows PC or Mac that does have built-in Bluetooth and you have problems
waking up the PC from sleep, the problem may be corrected by changing settings in the appropriate
device driver or device control panel. To change the settings do the following:
Windows PC: (note these instructions are specific to Windows 7)
Open the Mouse or Keyboard Control panel from the Start Menu/Control Panels or Start
Menu/Devices and Printers (double click on the Bluetooth device to open the device
properties window).
Select the Hardware tab and then under Devices select the HID Keyboard Device for the
Bluetooth keyboard or the HID Compliant Mouse for the Bluetooth mouse.
Click on the “Properties” button and in the subsequent window click on “Change Settings”.
In the subsequent window, select the “Power Management” tab.
Check the box next to “Allow this device to wake the computer.”
Click OK to close each window.
Repeat the steps for other device (Keyboard or Mouse) so that either can be used wake the
computer.
Mac OSX:
Open the Bluetooth control panel in System Preferences and click on the Advanced Button. Select
all three options for Bluetooth operation including “Allow Bluetooth Devices to wake this
computer.” Then click OK and close the control panel.

1
Appendix A
falcon™ Specifications
•T
h
e keyboard operation current is 2mA, and the LEDs current is 2mA. The battery is rated at
400 mA, and there is low battery protection. The keyboard will shut off automatically when
the voltage is below 3.0V.
•Generally, the keyboard will keep charge for 400mAH/2.6mA =153H (without LEDs) The
keyboard can stand by for a long period of time - 400mAH/4.5uA (more than 3000 days).
The keyboard keeps discharging with all the LED lit for 4 hours with 20 hours standby time.
This keyboard can be used heavily for approximately 19 days.
(400mAH/(2.6*2mA*4H_4.5UA*20H) ~=19 days. Turn off keyboard to conserve battery
power when not being used.
Item
Specification
Product Name
BT Keyboard with a falconTM on board
Keys
105
Key Travel
1.6 mm
Key Touch
Soft tactile rubber dome
Dimensions
380 x155 x 12 mm
15”L x 6”W x ½”H
Weight
586 g
21 oz
Interface
Bluetooth ver. 2.0, 3.0 &4.0 (HID)
Frequency
2.4 Ghz
Battery Size
450mAh
Battery
Lithium Ion 3.7 V
Charging Interface
Micro USB
Operation Current (key & light)
~2.6 mA
Standby Current
~4.5 uA
System Requirements
Windows XP, Vista, 7, 8
Max OS X v10.5.8 or later
iOS 4.0 or later
Android 3.0 or later
Power Consumption
Working: MAX 30mA
Sleep: MAX 0.2 mA
Power Off: 20uA
Control Distance
10 M
US Patent No.
8803807
1
Appendix B
Certifications
B.1 Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
The product comply with the US portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the product can be kept as far as possible from the user body
or set the device to lower output power if such function is available.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

2
B.2 Industry Canada statement:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Radiation Exposure Statement:
The product complies with the Canada portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the product can be kept as far as possible from the user body
or set the device to lower output power if such function is available.
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis
et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un
fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée
si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif
est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.

1
Appendix C
Limited Warranty (R7)
Definitions:
1. Product:
The falcon™ keyboard
2. Box:
The box used for shipping the falcon™ keyboard
3. Warranty:
A representation, especially in writing, made by a seller or company to a purchaser of a
product or service that a refund, or replacement will be made if the product or service proves
defective within a given time period.
4. Warranty Period:
The time provided by the seller for allowing the buyer to receive a full refund, or a
replacement keyboard.
5. Defects:
A defective product is one that does not function correctly because of manufacturer errors or
defects. Defects do not include user error, user abuse or damage, customer dissatisfaction, or
minor cosmetic flaws that do not affect product functions or performance.
6. Damaged Product:
A damaged product is one showing evidence of accident, misuse, abuse, product
modification or neglect, or damage from failure to follow instructions contained in the
Operation Manual. Includes performance of repairs by someone not authorized, or any
claims based on misrepresentations by the buyer. External causes such as collision with an
object, fire, flooding, windstorm, lightning, earthquake, exposure to adverse weather
conditions, theft, excessive electrical power fluctuation or improper use of any electrical
source. Product purchased from an unauthorized party or dealer may also result in a
damaged products. The battery is not covered if it has been charged by a battery charger not
specified or approved by supplier for charging the battery, if any of the seals on the battery
are broken or show evidence of tampering, or if the battery has been used in equipment
other than the falcon™ keyboard.
7. Ordinary wear and tear:
Normal use.
8. Shipping damage:
Any damage of a keyboard due to shipping, either to or from the buyer.
What is covered and for how long?
1. All falcon™ keyboards are tested/examined before the products leave the factory.
2. The factory warrants the falcon™ blue tooth keyboard to be free of defects in material and
workmanship under normal use and service for a one year period commencing upon the date of
receipt by you.
2
3. If you are not satisfied for any reason, the falcon™ keyboard, in its original box, can be returned
for a full refund to you if it is received at our shipping point within 30 days of your original receipt.
4. Return shipping by you is free if you contact the Falcon Enterprises customer service and obtain
a RMA number and shipping authorization.
5. The falcon™ keyboard will be replaced if found to be defective in material, workmanship, and
operation, during the 1-year warranty period.
6. This warranty protects you, as the original owner, providing that the product has been purchased
from an authorized falcon™ dealer/seller. For warranty service outside the United States, see
below.
8. The falcon™ keyboard will be replaced if the battery fails to recharge during the warranty
period.
What is not covered?
1. Damaged keyboard.
2. Unauthorized repairs.
Please make note of the following information and retain for your record.
Product Name____________ Model ___________Serial Number_________________
Supplier Location__________________________ Purchase Price_________________
_______________________Purchase Date_________________
_________________________________________Received Date_________________
How to obtain service:
1. To return a falcon™ keyboard, you must have proof of purchase with billing and shipping
information that matches our records (sales receipt, invoice, packing slip, etc.)
2. To request a Return Merchandize Authorization Number (RMA#), call 866-450-8932, email
[email protected], or write to: Falcon Enterprises (Attention: Customer Service
Department), 17150 Via Del Campo #206, San Diego, Ca 92127. If the return meets the criteria
stated above, we will promptly advise you of what action to take to complete a Return Merchandise
Authorization form, issue an authorized RMA number and issue return shipping documents.
3. PLEASE DO NOT SHIP YOUR falcon™ PRODUCT WITHOUT PRIOR AUTHORIZATION.
You are responsible for obtaining an RMA number and shipping authorization label as described
above.
4. Return the falcon™ keyboard in the original packaging to the address shown on the Shipping
Authorization form.
What are Falcon Enterprise's obligations?
1. During the limited 30 day warranty period, provided the product is returned as specified, the
keyboard will be inspected upon receipt at the shipping facility. If determined to be undamaged, a
full refund will be sent to you or a replacement shipped to you per your request.

3
2. During the limited 1 year warranty period, and the product will be inspected once it arrives at the
shipping facility. If the keyboard is determined to be defective, the buyer will receive a replacement
keyboard without additional cost.
What are the limits on Falcon Enterprise's liability?
In no event shall Falcon Enterprises be liable for damages in excess of the purchase price of the
product or for, without limitation, commercial loss of any short; loss of use, time, data, reputation,
opportunity, goodwill, profits or savings, inconvenience, incidental, special, consequential or
punitive damages, or damages arising from the use or inability to use the product. Some states and
jurisdictions do not allow limitations on how long an implied warranty lasts, or the disclaimer or
limitation of incidental or consequential damages, so the above limitations and disclaimers may not
apply to you.
International Policy.
1. All falcon™ keyboards are tested/examined before they leave the factory.
2. All sales are final. No returns, refunds or exchanges, no exceptions.
3. You are responsible for all customs, duty charges, and fees, in addition to shipping.
4. We are not responsible after the item leaves the warehouse.
5. PayPal is the only accepted method of payment.
6. Please verify that the falcon™ keyboard will work in your country prior to purchase.
7. Please verify that your "Ship to Address" is correct on both PayPal and the product order form
before placing your order.
8. All packages are shipped within 1 business day (M-F) from payment date, unless otherwise
stated.
9. You should use the online shipping calculator to calculate shipping or contact Falcon Enterprises
at [email protected] with questions.
10. International Shipping disclaimer: If an order is placed and the item is not accepted, denied,
canceled or the shipping company/customs/postal system returns the parcel under any condition to
us, you will be charged any fees or shipping costs associated with the initial order (from us to you)
and the return of the item to the supplier, and will be deducted from the total refund.
11. In transit disclaimer: If an order is canceled by you and the item is in transit, you will be
assessed a fee and it will be deducted from the total refund. In addition, the shipping cost will not
be refunded to you.
NOTE: We reserve the right to change our return policy at any time without notice.