FALEEMI FSC750 User manual

QUICK START GUIDE
www.faleemi.com
Home Wireless IP Camera
www.faleemi.com
Technical specifications are subject to change without notice.
No responsibility is taken for errors in contents or printing.
© FaleemiTechnologies Ltd or its affiliates.All rights reserved.
Apple,Apple Store,iPad,iPhone, MAC (Text, Logo,Picture) are trademarks of Apple,Inc.
Android,Google Play (Text,Logo, Picture) are trademarks of Google Inc.
Samsung (Text, Logo, Picture) is a registered trademark of Samsung Electronics Co.,Ltd.
MicroSD text and logo are the trademark of SD-3C, LLC.
Wi-Fi is a registered trademark of theWi-Fi Alliance.
All other products,names or companies are the brands or registered trademarks of their
respective owners.
[email protected]
www.facebook.com/faleemi
[email protected]
Faleemi Technologies Ltd
Smart Reliable Secure
Version . 01.2018
We at Faleemi are committed to do our part in protecting our environment.
In this continuing effect, we have supplied the detailed manual and startup
guide on our website http://support.faleemi.com.
FSC750/FSS850
FSC750 720P FSC850 1080P

01 02
Status LED
*Solid Light Blinking Quickly
Dear Customer,
Thanks for purchasing our products. If you encounter any problem while
configuring your camera, or need additional information, please feel free to
contact the Faleemi Support by email/skype: suppor[email protected].
Or visit the Faleemi website : https://www.faleemi.com/faq.
What’s in the box ?
Blinking Slowly
Red light is blinking slowly Power up and activating
Indicator Light Status Device Status
Red and blue lights are blinking slowly The device is ready to connect
Blue light is blinking quickly The device is receiving the wifi signal or connecting to the wifi
Blue and red lights are solid and steady The device is connected to the network
Red light is blinking quickly The device is reset to restore to factory default
Blue light goes off The device failed to connect to the network
TIPS
Download the App (Android and iOS)
Please download the Faleemi APP before doing the setup
First, connect your mobile device to your WiFi and download the App “Faleemi”from the App Store
or Google Play store,or scan below QR code to download it.
DID: VIEW-575554-JPRZV
Faleemi WiFi IP Camera
Connections
Faleemi Wifi IP Camera FSC750(720P)/FSC850(1080P)
Ceiling/Wall Mounting Bracket
Mounting Screws & Plugs
Power Adapter
Quick Start Guide
IR LEDs
Light Sensor
Built-in Microphone
Lens
Memory Card slot
Reset Button
Speaker
DC 5V Power
WPS Button
Status LED
P)
/FSC850
(
1080P
)
FSC750/FSC850 QUICK START GUIDE FSC750/FSC850 QUICK START GUIDE

03 04
3. At this time, press the WPS button on
your router once.
4. You will hear the sound “beep beep” in 5
seconds,that means the camera is connect-
ing to your WiFi.
Wait for around 30 seconds, Please follow
below steps to add the camera to your
mobile phone.
And then you will see the blue light turns on,
solid and steady (not blinking).
SETUP SETUP
TIPS
Now, please follow below instructions to get your camera set up.
Setup Method 1 WPS/QSS Connection Method
WPS:
Wi-Fi Protected Setup (Wi-Fi Simple Config) is a network security standard to create a secure
wireless home network,The standard emphasizes usability and security.
WPS Button WPS Icon
Because the reset button is very small, not easy
Because the reset button is very small, not easy
to hold down, please make sure to push down
to hold down, please make sure to push down
the Reset button for about 3 seconds and then
the Reset button for about 3 seconds and then
let it go.
let it go.
2. Please wait for about 1 minute until the
camera is initialized. You will see both red
and blue lights are flashing. Please press
down the reset button for about 3 seconds
and then let it go.
(Please don’t push it down for a longer
time, because if too long, it goes for
Reset, not WPS.)
FSC750/FSC850 QUICK START GUIDE FSC750/FSC850 QUICK START GUIDE
WPS
Reset
WPS/Reset
Button
Solid Light
WPS
3S+
Beep
Beep
1. Please move the camera to be close to
your wifi router and plug it in.
Make sure your wifi name and password do
Make sure your wifi name and password do
not have the special characters "
not have the special characters "
&
&
" and "
" and "
'
'
".
".
TIPS:
Please check if your wifi router has a "WPS/QSS" button or a WPS icon (see
below picture).
Usually it is on the top of your router, or 2 sides,back or bottom. If you find there
is a WPS/QSS button,please follow below steps to do the setup.If you don’t find
this button, please turn to page 7 to use your mobile phone to do the setup.

05 06
SETUP SETUP
FSC750/FSC850 QUICK START GUIDE FSC750/FSC850 QUICK START GUIDE
6.It will go back to below interface auto-
matically. It will show online. And just click
on the image to start to view & control.
Please make sure your phone is connected to your WiFi (the same WiFi what your camera
connected to), Open the Faleemi App. 4.Click on the camera searched.
5. Give your camera a name, and Default
Password(123456), click on [Done]
1. Click on [Add Camera]. 3. Click on [LAN Search].
To ensure the security of your camera,
To ensure the security of your camera,
you are suggested to change the default pass-
you are suggested to change the default pass-
word.Please refer to the instruction in Page 21.
word.Please refer to the instruction in Page 21.
If you don’t find it, please click on this icon
If you don’t find it, please click on this icon
to refresh.
to refresh.
Congratulations!
Congratulations!
Your camera is connected now
Your camera is connected now
You will see it shows the camera online
2. Click on [Add the cameras which are
already connected to your WiFi network]
Please don't change the camera password and
Please don't change the camera password and
username here. Please use the default password of
username here. Please use the default password of
123456 and username of admin. After your camera
123456 and username of admin. After your camera
is connected successfully, please refer to the
is connected successfully, please refer to the
instructions in page 21 to change the password
instructions in page 21 to change the password
and username.
and username.

3. Make sure your phone is connected to your 2.4GHz WiFi (not cellular data and 5GHz WiFi)
before doing the setup.
4. Make sure your wifi name and password do not have the special characters " & " and " ' ".
5.If you don’t see the blue light , please do a “Factory Reset”. This process is outlined on
Page 22 of this manual. (“How to restore to factory default”).
07 08
1. Please put your camera close to your wi
router and plug it in,you will hear “beep”after
40 seconds. The camera is initializing by
rotating from left to right and up to down and
stop in center finally (25s). And then you will
see the red and blue lights are blinking slowly
(around 80s after the camera powered up).
Before configuring your camera, please read the points below.
1.To ensure the camera works stable,please make sure to put your camera close
to your wifi router, if you could put them in the same room,that will be better.
2. Make sure your wifi router is connected to the Internet.
Camera Configuration
NOTE
5 mins
Only when it blinks red & blue slowly ,
you are able to set up the camera. It lasts
only 5 mins after the camera is powered
up.If you don't do the configuration during
this time period,please unplug the camera
and plug it in again to get another 5 mins
setting time.
Setup Method 2 Mobile Phone Setup
TIPS
SETUP SETUP
FSC750/FSC850 QUICK START GUIDE FSC750/FSC850 QUICK START GUIDE
Router
Plug
2.4GHz
Note, when the camera is startup,
it will sound one“beep”
2. Open the Faleemi App,
click on [Add Camera].
4. Click on
[The blue light is ashing slowly].
3. Click on [Add cameras via WiFi cong-
uration guide].

09 10
SETUP SETUP
FSC750/FSC850 QUICK START GUIDE FSC750/FSC850 QUICK START GUIDE
5. Please scan the QR Code at the bottom of
the camera
QR Code
Skip
If you can’t scan the QRcode,
If you can’t scan the QRcode,
please Click on [Skip]
please Click on [Skip]
If you see this, please click on "OK"
7. Input your WiFi password and click on
[Connect to WiFi].
8. Click on [Next].
Click on it to show and check your password
Click on it to show and check your password
6.Type in the name you have selected for your
camera and click on [Next].
if you can't scan the QR code,please enter the
if you can't scan the QR code,please enter the
DID (something like VIEW-1234567-ABCDE) in
DID (something like VIEW-1234567-ABCDE) in
the label on the camera manually.
the label on the camera manually.
Please don't change the user name and password.
Please don't change the user name and password.
You have to use the default ones here.But you can
You have to use the default ones here.But you can
change them after your camera is connected.Please
change them after your camera is connected.Please
refer to the instruction on page 21.
refer to the instruction on page 21.

11 12
SETUP SETUP
FSC750/FSC850 QUICK START GUIDE FSC750/FSC850 QUICK START GUIDE
( If the blue LED is blinking rapidly (See table
bottom at page 2), it indicates that the camera
setup has taken longer than 4 mins.
If the setting is failed,
please nd below solution.
9. Click on [Start] 10.After the wifi is connected, it will go back
to below interface automatically. It will show
online. And just click on the image to view
live video.
Please unplug the camera and plug it in again,
wait around 90 seconds, after it is initialized,
you will see both red and blue lights are solid.
(This means the camera is connected to
your wifi) Then please go back to home page
and follow the steps in Page 5 to add the
camera to your Faleemi App and no need to set
up wi again.
3. If you still can't add it to your Faleemi APP,
please follow the guide in Page 22 [5. How to
restore to factory default?] to reset your
camera and follow the steps since Page 7 to do
the settings again.
1. Please check if your WiFi password is correct
and re-configure it again.
2. If the wifi password is correct, it always lets
you try again. This is because for some routers,
you may not hear double beep after the WiFi
connection is succeeded.
If the setting is failed,please find
below solution or contact us by
Email: [email protected]
Skype: suppor[email protected]
Phone: [phone]
EST: 6am~11am, 8pm-11pm
PST: 6am~8am, 5pm-12pm
When you call us, please wait some more
When you call us,please wait some more
moment until it gets through.
moment until it gets through.
You will see it shows the camera online
Note: Please click on "Start" button.Your
Note: Please click on "Start" button.Your
phone will make a loud sound to
phone will make a loud sound to
transmit the data to the camera.When
transmit the data to the camera.When
the camera receives the wifi signal,it will
the camera receives the wifi signal,it will
sound with 2 beeps.
sound with 2 beeps.

Hold Talk
Restore to default
480P/720P/1080P*(*FSC850)
Contract
IR LED Off
Auto
Set or Call Preset (N/A)
Preset
Pan & Tilt Control
Snapshot to phone
Record video to phone
Audio on/off
Microphone on/off
Contrast
Brightness
PANEL EL
13 14
FSC750/FSC850 QUICK START GUIDE FSC750/FSC850 QUICK START GUIDE
Please move the camera to adjust the angle.
WPS
Reset
WPS
Reset
Cruise Vertically (N/A)
Cruise Horizontally(N/A)
Menu
Flip
Mirror
Exit
Live Video Interface
Faleemi_FSC850
Preset
Turn on the Microphone; you will see a pop-up button “Hold Talk”, press down
Turn on the Microphone; you will see a pop-up button “Hold Talk”, press down
this button to talk to the people at the camera side.
this button to talk to the people at the camera side.

15 16
ADD
ADD
FSC750/FSC850 QUICK START GUIDE FSC750/FSC850 QUICK START GUIDE
After you use one phone to get your camera connected to your WiFi and you can view the live
video from your first phone.
If you would like to add your camera to the second phone, please ensure your second phone
connects to your WiFi (the same WiFi your camera connected to) .
How to connect the camera to the second Phone?
5.Click on the camera searched.
6. Give your camera a name, and
input your Password, click on
[Done] go back to home to start
to view & control.
2. Open the Faleemi App,
Click on [Add Camera].
1. Download the Faleemi App to your second phone.
Tips:
Tips:
Default (123456), but if you
Default (123456), but if you
changed the password on your
changed the password on your
first phone, please enter your
first phone, please enter your
new password here.
new password here.
3. Click on [Add the cameras
which are already connected to
your Wi network]
4. Click on [LAN Search].
If you don’t find it, please click on
If you don’t find it, please click on
this icon to refresh.
this icon to refresh.

Please follow below steps to go to Advanced Settings to do more settings.
2. Click on [Advanced Settings]. 3. Do advanced settings here.1. Click on the icon [ ].
MORE
RECORD
1. Click on [Advanced Settings].
* Please format your memory card before using.
17 18
3. Enable [Memory Card Recording]
4. Set [Record Time] (15 mins Max)
5. Click on [Done].
2.Click on [Memory Card Setting].
3
5
Advanced Settings
1
2
4
How to set it to record
constantly to the
memory card?
Tips:
Tips:
If you change your password,
If you change your password,
please remember to update
please remember to update
the new password to your
the new password to your
other phone and click on
other phone and click on
"Done"
"Done"
Tips: Max 15 Minutes
Tips: Max 15 Minutes
Tips:
Tips:
If you just want to record alarm
If you just want to record alarm
video to the memory card,
video to the memory card,
please disable this button.
please disable this button.
FSC750/FSC850 QUICK START GUIDE FSC750/FSC850 QUICK START GUIDE
Meromy Card Slot
Please insert the Micro SD card as what
shows at left.
Suggest to use MicroSDHC* Class10
UHS-1 Memory Card.
(* MicroSD,MicroSDHC text and logo are the trademark
of SD-3C, LLC)