Faminode H2 User manual

UNIT mm
CUT LINE 切线
FOLDING LINE 压痕线
BRAND NAME 品牌
PROJECT NO. 项目型号
Faminode
H2
DATE 日期
Version V1.1
黄雯
2021.08.12
DESIGNED BY 设计者
SALES CHANNEL 销售渠道 Amazon
ANGLE
PRODUCT TYPE 产品类别 投影仪
SCALE
SHEET
1:1
1/56
A B C D E F
A B CD E F
3
4
2
1
3
4
2
1
NOTES(技术要求):
UMItem name 物料名
Part No. 30017000082
1.Dimension after binding(装订后尺寸)：90*120mm.
2.Print colour(印刷颜色)：4C.
3.Material(材质)：封面157g哑粉；内页80g书纸.
4.Coating(表面处理)：封面过哑膜；内页无表面处理.
5.Binding process(装订工艺)：骑马钉.
6.Output lpi(输出网线)：200 lpi.
7.Tolerance(公差)：L(长)*W(宽):±1.5mm.
120
90
USER MANUAL
Faminode H2 Projector
V1.1

USER MANUAL
Faminode H2 Projector
V1.1

CONTENTS
01 - 17English
18 - 34Deutsch
35 - 51日本語

WHAT'S IN THE BOX
Projector * 1 Power Cable * 1
HDMI Cable * 1 AV Cable * 1 User Manual * 1
Remote Control * 1
Backpack * 1
V1.0
USER MANUAL
FaminodeH2 Projector
1
English

IMPORTANT SAFEGUARDS
Installation
• For better effects, use the projector with the curtains closed or in a dark room.
• Use the projector carefully as a drop or impact may damage its parts and cause a
blurry image or abnormal display.
Power
• Be careful when using the power cord and avoid excessive bending as damage to
the power cord may cause electric shock or fire.
• Turn off the power before unplugging the power cord.
Cleaning
• Unplug the power cable first.
• Clean the body evenly with a damp cloth. A mild detergent can be used.
• Use a glass cloth or lens paper. Do not scratch the lens.
• Clean the vents and speakers evenly with a banister brush to prevent them from
becoming blocked.
High Temperature Warning
• The temperature near the cooling vent will be high during or after projection. Do
not touch it to avoid scalding.
• Do not look at the lens directly during projection to avoid hurting your eyes.
Tips
• Do not disassemble the projector as there is a risk of electric shock and the
warranty will be void.
• Do not put any liquid or heavy items on the projector.
• To ensure steady heat dissipation, open the height bracket at the bottom of the
projector before projection.
2

ABOUT THE PROJECTOR
This projector can receive high-definition video signals and composite video signals,
and supports the input and output of stereo audio signals. Refer to the figure below
to connect the projector and other audio equipment according to your needs:
1 2 7 8 9
3 4 5 6
10 11
12 13 14 15
1
2
3
4
5
6
7
8
IR Receiver
Lens
Power Socket
IR Receiver
Headphone Jack
HDMI1 Port
Removable Dust Cover
USB Port
9
10
AV Port
HDMI2 Port
Speaker
Cooling Vent
Focus
Keystone
Cooling Vent
11
12
13
14
15
Note: Press the dust net lightly and it will pop out for easy cleaning.
3

1 2
3
1
2
Keypads (Picture 1)
Rating label
3
4
Projector mount holes
Level-stand adjustment
3
4
OK Key
Arrow Keys
Return Key
Source Key
Power Key
(Picture 1)
4

Remote Control
1
1
2
3
4
5
6
7
8
Power
Source
Arrow keys
Menu
Homepage
Volume +
Volume -
Mute
Picture flip
Confirmation key
(Play and Pause)
Return
Previous
Next
9
10
11
12
13
9
10
11
12
13
2
3
5
4
6
7
8
5

PROJECTOR INSTALLATION
Standard Settings
Please refer to the following table to adjust your picture size and distance (from
lens to screen):
Aspect ratio 16:9
Projection distance (m)Picture size (“)
35
100
200
300
1.50
3.30
6.00
9.00
Please allow the image size error in the above table to be ±3%. If the distance is less
than the minimum data or more than the maximum data, the image may be blurry.
Warning:
Please check the diagram below for trapezoid adjustment:
Incorrect Installation Incorrect InstallationCorrect Installation
Projector
Screen
Symmetry
Axis
Screen
6

Installation Method
Contact a professional installer to install the projector on the ceiling. Follow the
instructions below to place the projector correctly:
Projector Projector
Projector
Projector
Screen Screen
Screen
Screen
① Front projection ceiling mount
② Front projection table mount ④ Rear projection table mount
③ Rear projection ceiling mount
Warning:
1. If the projector is incorrectly installed on a ceiling or surface, it may be damaged
beyond repair.
2. The projector should only be used in an environment where the temperature
does not exceed the range of 5–35℃. Otherwise, a malfunction may occur.
3. Malfunction may occur if the projector is subjected to dusty, wet, humid or smoky
conditions.
4. Poor ventilation could lead to overheating which may damage the projector and
even cause a life-threatening situation.
7

TURN THE PROJECTOR ON/OFF
FOCUS ADJUSTMENT
Projector
Height
Height
Height-feet
Adjustment
Projector
Screen
Screen
When the projector is connected to the power source, it will enter standby mode
and the signal indicator will be red.
Power on: Press the power key on the body or remote control; the indicator will
turn blue and enter working mode.
Power off: In working mode, press the power key on the body or remote control;
the indicator will change from blue to red and the projector will turn off.
Focus Adjustment
Turn the trackwheel clockwise to the limit, then slowly rotate it counterclockwise.
At the same time, carefully observe the pixels on the screen. When the image
particles are clearest, the pixels on the screen are the best focus of the lens.
Keystone
If a projected picture has keystone distortion, correct the image using keystone
adjustment. The image will be in a trapezoidal shape if the screen or projector is
not level. Rotate the keystone trackwheel clockwise or counterclockwise to adjust
the position. Reposition the projector to improve its angle to the screen. The
circumference of the image may still not be in focus.
Focusing dial
If you are unable to use the keystone adjustment function to correct the trapezoid
distortion, lower the projector to the center of the screen vertically.
Keystone
8

INTERFACE OPERATION INSTRUCTIONS
How to Select the Source
Select the source channel you want in the list on the left side of the main interface,
such as HDMI1 / HDMI2 / AV, then press the OK key on the remote control to enter
the corresponding source interface.
How to Connect to Wi-Fi
Select the Settings icon in the upper right-hand corner of the main interface, press
the OK key on the remote control and select “WiFi Setting”.
After entering the interface, select the WiFi you wish to connect to from the list
below, then enter the password. "Connected" will appear next to the name of the
successfully connected Wi-Fi.
9

10

How to Connect via Bluetooth
Select the Settings icon in the upper right-hand corner of the main interface, press
the OK key on the remote control and select “Bluetooth Setting”.
After entering the interface, turn on Bluetooth and search for Bluetooth devices
with which to pair.
Note: The projector can connect to Bluetooth speakers and Bluetooth headphones,
but not Bluetooth mobile phones.
11

How to Use Projection Settings
Select the Settings icon in the upper right-hand corner of the main interface, press
the OK key on the remote control and select “Projection Image Setting”.
After entering the interface, select the mode you want in the projection settings.
Projection modes: Front-Desktop / Rear-Desktop / Front-Ceiling / Rear-Ceiling Keystone
Advanced: Front / Side C
Side: 4-Point Keystone
12

4-Point Keystone
Select 4-Point Keystone in the projection settings, after entering the interface,
adjust according to the text prompts in the interface.
13

How to Use iOS Cast
In the main interface, select “iOS Cast”, press the OK key on the remote control
and follow the steps below.
Note: The projector needs to be connected to the Internet to use iOS Cast or
upgrade the projector for the first time.
1. The iOS device and projector must be connected to the same network.
2. Open the control center of the iOS device and select “Screen Mirroring”.
3. Select the corresponding projector device name.
Shows the name of the currently connected WiFi
Shows the name of the currently connected device
14

How to Use Miracast
Select “Miracast” in the main interface, press the OK key on the remote control and
follow the steps below.
1. Turn on the Wi-Fi of the Android device (it is recommended that the projector is
connected to the same router as the Android device or the Wi-Fi of the Android
device is not connected to any router).
2. Go to the Wi-Fi settings of the Android device.
3. Select the corresponding projector device name.
15

SUPPORTED MULTIMEDIA FORMATS
How to Play Files on USB Drive
Select the required category from “Movie”, “Music”, “Photo” or “Office Suite” in the
main interface and press the OK key on the remote control to enter the
corresponding category.
Find the file you wish to play and press the OK key (the required category cannot
be entered if the USB drive is not connected).
Video Formats: 3GP/AVI/FLV/MP4/MPG/VOB/TS/M2TS/DAT/MKV
Audio Formats: MP3/APE/AAC/FLAC/OGG/WAV/WMA/MID/DTS/M4A
Image Formats: BMP/JPG/PNG/JPEG
This model does not support any Dolby audio decoding due to the copyright
of the Dolby patent.
16