FARM SCAN AM-3100 User manual

AM-3100'/'AM-3109'
OPERATING INSTRUCTIONS
AM-3100 (7”) / AM-3109 (9”)
Features Include:
• Individual & Quad viewing options
• Mirror/flip/reverse viewing options per channel
• Trigger control per channel (i.e. reverse light)
• 12-24v compatible
7" & 9” QUAD HD Camera Monitoring

AM-3100 / AM-3109
2
Vers io n 3.0 January 2020 AM-3100/3109
Storage and keeping
• Do not expose the monitor to excessive heat or cold. The storage
temperature of this device is -30 ~+80
℃
, and the operating
temperature is -10 ~+65
℃
. The Humidity is Rh90%.
• Never use this device near water
• Never use this device in environments with excessive moisture, dust or
smoke.
• Avoid dropping or striking this device.
• Avoid using this device in enclosed spaces, areas with excessive
vibration or subject to severe impacts.
• Never puncture, scratch or use abrasive cleaning materials on this
device.
• Do not place cables where they may be pinched or stepped on.
• Leave at least a 2”space between the monitor and walls, cabinets or
other objects to allow adequate air circulation around the unit.
• The monitor is not designed to be waterproof.
Operating Precautions
• The device may be powered by a 12 or 24 volt automotive battery or
vehicle electrical system.
• Make sure all cables are connected properly observe polarity.
• Improper cable connections may damage the monitor.
• Remove the power cable connections when you do not intend to use
the unit.

AM-3100 / AM-3109
3
Vers io n 3.0 January 2020 AM-3100/3109
What’s in the Kit
• 7” or 9” TFT LCD
• Sun Visor (7”) – Inbuilt within 9”
• Bracket – Fan & U Style with knobs
• Remote Control
• Power Harness Fused
• 4 Way Camera Harness
• 2x Square Style AHD Camera
• 2x 10m Extension Cable
• Support Card & Manual
Technical Specifications
• Display size: 7-inch or 9-inch with sun visor
• Display format: 16:9
• Brightness: 500cd/m²
• Contrast: 800:1
• View Angle: 85°
• System: PAL/NTSC
• Video: AHD or CVBS
• Picture resolution: 1024 (H)×600 (W)
• Image Settings: brightness, chroma, contrast
• Power supply: 12~24V (5w)
• Working temperature: -20° to +70°
• Storage temperature: -30° to +75°
• Mirror/Flip/Non-Mirror functions
• Parking line indicator (4 step)
Other Accessories
• 5m Extension Cable (PN : 3100-EXT-05M)
• 10m Extension Cable (PN : 3100-EXT-10M)
• 15m Extension Cable (PN : 3100-EXT-15M)
• 20m Extension Cable (PN : 3100-EXT-20M)
• 4 Way Trailer Harness (PN : 3100-TC-4)

AM-3100 / AM-3109
4
Vers io n 3.0 January 2020 AM-3100/3109
HD Monitor – 7”
12 3 4 5 6 7
(1) "–" When setting a value, it is a decrease value, after entering the menu, it is the
previous item. When setting the position of the reverse indicator, it moves it to the
left. Set the single-screen & volume “-“
(2) "+" – When setting a value. it is an increase value, and after entering the menu, it
is the next item. When setting the position of the reverse indicator, it moves to the
right. Set the single-screen volume “+”
(3) “MENU” – Calls up the main menu screen. After entering the menu, it is also used
to select the next level within a menu and to change the current state of an option
within the menu. A long press will enter the screen into single-channel scan mode
(4) “CAM” – Switch to single channel in normal display, return to the previous menu
after entering the menu, move upward position when setting the reverse indicator.
(5) “MODE” - Single View > Split view > Quad view > Scan View
(6) “POWER” - Can be switched on and off in any situation except for triggering state
and scanning state. Long press for 5 seconds to reset
(7) Indicator & IR light

AM-3100 / AM-3109
5
Vers io n 3.0 January 2020 AM-3100/3109
HD Monitor – 9”
1 2 3 4 5 6 7 8 9 10
(1) "–" When setting a value, it is a decrease value, after entering the menu, it is the
previous item. When setting the position of the reverse indicator, it moves it to the
left. Set the single-screen & volume “-“
(2) "+" – When setting a value. it is an increase value, and after entering the menu, it
is the next item. When setting the position of the reverse indicator, it moves to the
right. Set the single-screen volume “+”
(3) “MENU” – Calls up the main menu screen. After entering the menu, it is also used
to select the next level within a menu and to change the current state of an option
within the menu. A long press will enter the screen into single-channel scan mode
(4) “D/N” – Day & night functions (Debug mode)
(5) “CAM” – Switch to single channel in normal display, return to the previous menu
after entering the menu, move upward position when setting the reverse indicator
(6) “QUAD” – Changes from single channel view to quad view. This button is also
used for menu down in the reverse indicator menu
(7) “MODE” - Colour View & debugging function
(8) “POWER” – Can be switched on and off in any situation except for triggering state
and scanning state. Long press for 5 seconds to reset
(9) Remote IR
(10) Power Indicator light

AM-3100 / AM-3109
6
Vers io n 3.0 January 2020 AM-3100/3109
Connection - Main Harness
• Black > Ground
• Red > ACC (Car key power. DC12 or 24V)
• Green > Trigger Cam 1
o (Reversing light power positive. DC12 or 24V)
• Blue > Trigger Cam 2
o (Optional. DC12 or 24V)
• Grey > Trigger > Cam 3
o (Connect positive end of left reversing light. DC12 or 24V)
• White > Trigger Cam 4
o (Connect positive end of right reversing light. DC12 or 24V)
• Orange > Trigger Cam 5
o (to any other trigger control)

AM-3100 / AM-3109
7
Vers io n 3.0 January 2020 AM-3100/3109
Connection - Overview
Extension Cable - Pinout

AM-3100 / AM-3109
8
Vers io n 3.0 January 2020 AM-3100/3109
Remote Control
1 - Switch split channel
2 - Decrease button - For adjusting of Volume, Brightness, Contrast,
Language, Rotation, etc
3 - Downwards select
4 - Select channel 1 full display
5 - Select channel 3 full display
6 - Power ON / OFF
7 - Upwards select
8 - Increase button - For adjusting of Volume, Brightness, Contrast,
Language, Rotation, etc
9 - Menu - Access Brightness, Contrast, Language, Rotation, etc.
10 - Select channel 2 full display
11 - Select channel 4 full display
Pull out Push