FASEL FCU-EXT-DISPLAY-TOUCH Operation and maintenance manual

I:\DOKU\Fasel\FCU-EXT\DISPLAY\Modul\Ext-Display_Kurzanl_ohne_Symbole_EN Stand: 06.09.2013
Keys
Display Info
20.00
LED does not glow: you are in the standard display menu of the actual
values, here e.g. time

The LED glows:
As long as this LED glows you are in the menu for changing the nominal
values. After some seconds without operating the key board, the program
automatically returns to main screen and the LED goes out.
50° The LED glows
Display of the nominal temperature

50°
The LED blinks
With the keys and you can set the desired temperature. To store
the values press the key 

50r.H.
F 5
The LED glows
If there is a humidity sensor then the nominal humidity is displayed e.g.
50r.H. or e.g. F 5 if there is no humidity sensor (Interval humidity).

50r.H.
F 5
The LED blinks
With the keys and you can select the desired humidity. To store
the values press the key 

06.00 The LED glows
The heating duration is displayed

06.00
The LED blinks
With the keys and you can set the desired duration of heating. To
store the value press the key 

OFF The LED glows
Display for light ON/OFF or the dimmer level

LI 1
…
LI 9
The LED blinks
With the keys and you can switch ON or switch OFF the light or
set the brightness. To store the value of the brightness press the key 

OFF The LED glows
Display for the blower ON/OFF or the blower level
FASEL GmbH
Brief instruction for the operation of the internal display
FCU-EXT-DISPLAY-TOUCH
Some menus are available only if the corresponding bathing options or other options
are available.
FCU-EXT\DISPLAY_Kurzanl.pdf Technische Änderungen vorbehalten Seite 1 von 3

I:\DOKU\Fasel\FCU-EXT\DISPLAY\Modul\Ext-Display_Kurzanl_ohne_Symbole_EN Stand: 06.09.2013
Keys
Display Info

FA 1
…
FA 9
The LED blinks
With the keys and you can switch ON or switch OFF the blower or
set the blower RPM. To store the blower stage press the key 

CoLo The LED glows
Display of the coloured light mode

AUtO
The LED blinks
With the keys and you can set the coloured light mode. To store
the coloured light mode, press the key Here coloured light automatic
mode

L1 Manual operation: Lamp 1 = ON, all others = OFF

L1L2 Manual operation: Lamp 1+ 2 = ON, all others = OFF

L2 Manual operation: Lamp 2 = ON, all others = OFF
…etc.

L4 Manual operation: Lamp 4 = ON, all others = OFF

OFF Switch off the coloured light

AUtO See above


STOP
STAr
The LED sblinks
If a bathing option is active, then STOP appears, you can then end the
bathing option.
If no bathing option is active then START appears.
Depending on the type of control device you are using, you can select the
desired bathing option with the keys and 

SAUn Start the bathing option Sauna with the key .

HUMI Start the bathing option Sauna with humidity with the key .

Ir Start the bathing option Infrared with the key .
FCU-EXT\DISPLAY_Kurzanl.pdf Technische Änderungen vorbehalten Seite 2 von 3

I:\DOKU\Fasel\FCU-EXT\DISPLAY\Modul\Ext-Display_Kurzanl_ohne_Symbole_EN Stand: 06.09.2013
Keys
Display Info
A remote control (2-FCU-HANDSENDER-A, similar to figure)
is available for the internal display FCU-EXT-DISPLAY-
TOUCH.
The internal display (Internal adjustment) can be operated
through the keys of the hand held transmitter or directly at
the internal display itself. The keys are identical in their
function.
When batt appears on the display, then the battery of the
hand held transmitter is too weak or almost empty.

+

2.0.00
Report new hand held transmitter to the internal display:
Press the keys on the internal display (not on the hand held transmitter),
depicted on the left, simultaneously. In the display on the left position
(here after 2) a point appears. Now you must press any key on the hand
held transmitter till the point on the left position does not glow any more.
Now the hand held transmitter is fully functional on the internal display .
Hand-held transmitter for internal display
FCU-EXT\DISPLAY_Kurzanl.pdf Technische Änderungen vorbehalten Seite 3 von 3