Fast Forward EnergyCam User manual
Page 1 / 2
FAST EnergyCam 2-Tariff Meter Adapter L-Shape
(Art.Nr.2008)
Quick Start Guide
1 - How it works
The EnergyCam 2-Tariff Meter Adapter L-Shape allows to install all EnergyCam types (RF and Cable) on a
2-tariff meter (HT/NT). It serves as support to install an EnergyCam for reading the upper counter (HT).
This guide gives you all the information you need to install the device.
2 - What’s in the box
1) EnergyCam 2-Tariff Meter Adapter
2) Spare 3M adhesive pad
3) Quick Start Guide (this document)
3 - Installation
How to install your EnergyCam 2-Tariff Meter Adapter:
1Installation of the adapter on the meter
Clean the surface of the meter with an EnergyCam 3M cleaning cloth. Remove the protective
backing from the adhesive pad on the adapter. Attach the adapter on the surface of the meter,
centered over the upper counter.
Page 2 / 2
2Installation of EnergyCam
Install the EnergyCam upside down on the meter and affix it on the adapter. See EnergyCam manual
for details how to install an EnergyCam.
4 - Technical support
If you have any problems or questions, please contact us directly:
You can reach us from Monday to Friday between 0900 and 1700 CET
Tel: +49 (0)89-540-40-100
www.fastforward.ag/eng/support
FAST FORWARD AG Ruedesheimer Strasse 11, D-80686 Munich
Other manuals for EnergyCam
2
This manual suits for next models
1
Table of contents
Other Fast Forward Adapter manuals
