FAWNS Playtime PICUS User manual

Woodcot Court, 2A Woodcot Gardens, Farnborough, Hampshire GU14 9RD el: 01252 515199 Fax: [phone]
http://www.fawns.co.uk mail:[e-mail]
No part of this document may be copied or used without the express written permission of FAWNS RECREATIONA SERVICES TD (c) FRS 2014
PICUS
PICK UP S ICKS ' WO' (SF)
PICUS2(SF)
FFH
SIZE
AGE RANGE
PROD. CODE
L:3.16M x W:4.42M x H:1.50M
600MM
3-5 YEARS OLD
ECHNICAL DA A
MINIMUM SPACE REQUIRED
SUPERVISED PLAY
EQUIPMEN YPE
LARGES PAR
RECOMMENDED
HEAVIES PAR
6.10M X 6.70M
LOW LEVEL
2100MM X 125MM DIA
15.5KG
INS ALLA ION DE AILS
1. READ INS ALLA ION INS RUC IONS HROUGHLY BEFORE COMMENCING INS ALLA ION OF UNI
2. EXCAVA E FOUNDA IONS USING HE DE AIL AS SHOWN ON PAGE 2 OF HIS DOCUMEN
3. ENSURE O CHECK AND IGH EN ALL FIXINGS USING PRO EC IVE CAPS WHERE NECESSARY
4. BACKFILL FOUNDA IONS WI H CUBIC M CONCRE E ALLOWING O SE FOR 48 HOURS
5. REMOVE ALL ASSEMBLY AIDS BEFORE HE EQUIPMEN IS USED
0.062
HIS PRODUC CONFORMS WI H BS EN1176- :20081
Date:
Version: A
01/06/16 PAGE OF 1 4
& BS EN1176- 3 :2008

PAGE OF 2 4
A FOUNDATIONS 350 X 350 X 600 DEEP UN ESS OTHERWISE SPECIFIED
846 779 592
1050
780
693
1051 858 1567
963842339
1258.3
801.3
801.3
1348.6
867.4
1586.1
1585.1
1029.1
849.3
1537.9
1447.8
1137.9
1249.6
1537.9
900 X 350 X 250 DEEP
1496
495
600600

PAGE OF 3 4
643 650 966 638 1272 406 657
292
352
1899
913
1222
1060
608
110760815286261111253
604104569643851313863501098215
6779
6085
22.5 SQ METRES WETPOUR SURFACING
18.5 INEAR METRES WETPOUR EDGING
1211.3
1050.2
1067.5
910.3
839.6
987.0
841.5
1035.5
1052.2
953.1

PAGE OF 4 4
5500
7000
1452.2
1775.6
1178.0
1292.7
1165.5
22 GRASS SAVER TI ES (1.5M X 1.0M)

Woodcot Court, 2A Woodcot Gardens, Farnborough, Hampshire GU14 9RD el: 01252 515199 Fax: [phone] http://www.fawns.co.uk Email:[e-mail]
No part of this document may be copied or used without the express written permission of FAWNS RECREATIONA SERVICES TD (c) FRS 2014
3rd Angle
Projection
Date:
Drawn By:
Drawing Number:
Sheet:
Issue Date:
Sign:
Issue:Code:
STEEL GROUND SHOE GENERAL INSTALLATION
207140
207140 ASSY
AK
OF
12
20/05/15
PAG E OF 1 1
A
20/05/15
AK
500.0100.0
6
45.0° R100.0
5
1
4
50.0 MIN
2
KEY
1. POST
2. STEEL GROUND SHOE
3. BOTTOM OF POST
4. FINISHED SURFACE LE EL
5. TOP OF FOUNDATION
6. CONCRETE FOUNDATION
7. HARD STANDING
STEEL GROUND SHOE INSTALLATION
Excavate the foundation hole in accordance to each products individual specification sheet. Each steel ground shoe is
supplied pre-attached to the unit post. Position the post into the foundation hole to the required depth.
NOTE: As illustrated, it's essential a distance of 50mm is maintained from the finished surface level to the underside of the
timber post.
3
GRASS/SYNTHETIC SURFACING

PAG E OF 2 2
Excavate the foundation hole in accordance to each products individual specification sheet. Each steel ground shoe is
supplied pre-attached to the unit post. Position the post into the foundation hole to the required depth.
NOTE: As illustrated, it's essential a distance of 50mm is maintained from the finished surface level to the underside of the
timber post.
LOOSEFILL SURFACING
500.0300.0
50.0 MIN
100.0
7
4

PAGE OF 1 8
Woodcot Court, 2A Woodcot Gardens, Farnborough, Hampshire GU1 9RD Tel: [phone] Fax: [phone] http://www.fawns.co.uk Email:[email protected]
No part of this document may be copied or used without the express written permission of FAWNS RECREATIONAL SERVICES LTD (c) FRS 2013
3rd Angle
Projection
Date:
Drawn By:
Drawing Number:
Sheet:
Issue Date:
Sign:
Issue:Code:
Low Level Pick Up Sticks 'Two' Installation/Assembly PICUS2(SF)
PICUS2(SF)
PICUS2(SF)-IN-AY
JG
OF
18
03/02/17 03/02/17
JG
A
Parts List
ITEM QTY PART NUMBER DESCRIPTION
1 1 FRTB050 9 PICUS2 TIMBER SET
2 1 FRMS00665 PICUS3 ROPE SET
3 1 Tri deck TRIANGLE DECK
1 FRPE00663 PICUS3 HDPE PANEL
51 FAHR 600 POLY SLIDE (GREEN) FAHR 600 POLY SLIDE
6 1 FRMT01023 GROUND ANCHOR SCRAMBLE NET
7 SSB505090R 50 X 50 X 125 DIA POST BRKT
8 M10X 0BHSS M10 x 0 Socket Button Head SS
9 7 M10X70CHS M10 x 70 Hex Coach SS
10 9 M10X120CHS M10 x 120 Hex Coach SS
Parts List
ITEM QTY PART NUMBER DESCRIPTION
11 5 M12X150CS M12 X 150 COACH SCREW
12 1 M12X200CB M12 x 200 Coach Bolt
13 8 M12X220CB M12 x 220 Coach Bolt
1 2 M12X230CB M12 x 230 Coach Bolt
15 50 M12WASH 32MM 12G WASHER
16 M10NYLOC M10 NYLOC HEX NUT MS ZP
17 21 M12NYLOC M12 NYLOC NUT
18 11 M10DONUT_GREEN M10 DONUT (GREEN)
19 35 PLC 80DCAP GREEN POLY CAP 8
20 8 2071 0 Ø1 0 POST FOOT 900MM
POST LABELS
(REFER TO TIMBER DRAWING FRTB050 9)
A
F
I
J
K
L
M
G
E
H
D
C
N
O
EQUIPMENT NEEDED
n13 AUGER DRILL BIT
n8 DRILL BIT
B
A
A
J
J
J
I
O

PAGE OF 2 8
DETAIL B
BUILD TRIANGLE PLATFORM WITH SLIDE
Excavate the foundations as detailed using sheet PICUS3-SPEC. Using posts labelled 'O' loosely secure to the upright posts
labelled 'A' using the supplied Washer Screws to the dimensions detailed below. Pay strict attention to the direction of the
counterbore holes on posts 'A' as these will have to be facing the correct direction for the rope attachment detailed later on in
this installation guide. NOTE: Do not fully tighten the Washer Screws until the unit has been assembled.
SURFACE LEVEL
A A
A
OO
SLIDE
DETAIL A
The counterbore holes will point in the direction of an opposite post/
foundation as illustrated with the arrows in Detail View B. The counterbore
will be on the opposite side to the arrow head.
With the three posts formed secure the triangle deck frame to the three
upright posts using the supplied Coach Screws as shown in Detail View A.
Once the frame has been established, the decking can be laid on top and
secured using the supplied assy screws.
SECURE USING SUPPLIED
M8 X 1 0 WASHER SCREWS
51.5810.5
767.5
600.0
9
15
18

PAGE OF 3 8
C
Secure the HDPE slide frame to the front of the deck and the upright posts as illustrated in Detail View C. Ensure there are
no gaps between the posts and the HDPE slide frame, any gaps can be eliminated by maneuvering the posts labelled 'A'
and the triangle deck.
DETAIL C
With the HDPE slide frame secured attach the slide steel bracket using the supplied Button
Head Screws. A drill hole may have to be created to go through the timber deck so the
steel bracket can attach securely to the HDPE panel and the Triangle Timber Deck.
Now secure the slide assembly to the HDPE frame and the steel support bracket.
With the deck assembly complete and the correct shape achieved, concrete can
now be added to the four foundation holes for this part of the unit.
7 8 9 15 16 18

PAGE OF 8
POST ASSEMBLY & INSTALLATION
The Upright posts on this unit should all be leaning at a 10~ angle away from the deck structure. The posts should all be drilled
and of the correct size to achieve this angle. Ensure all bolts and screws are loosely fitted to give enough movement for ropes
and timbers to have the appropriate tensioning.
Sustain the two upright posts labelled 'B' & 'C' into the corresponding foundation hole. Both Posts have pre-drilled holes to
secure the horizontal posts to using the supplied Coach Bolts. Secure post labelled 'H' to the lower hole on post 'B' and fix
using the supplied Coach Bolt. The upper end of post 'H' is fixed to post 'A' on the triangle deck using a Coach Screw to the
dimension shown below. Repeat this same process for post labelled 'C' but with the second hole from ground level on post 'I'.
H
B
I
J
C
SURFACE LEVEL
With Posts 'H' & 'I' bracing the upright posts, secure post 'J' to the
pre-drilled holes using the supplied Coach Screws. NOTE: The
dimensions for the pre-drilled holes below are mearly a reference to
using the correct hole on the upright post. If made to the correct these
posts shouldn't require drilling.
SECURE USING
M12 X 150 COACH SCREWS
SECURE USING
M12 X 220 COACH BOLTS
385.0
217.5
320.0
202.0
365.0
336.0

PAGE OF 5 8
Prop post labelled 'K' into the foundation hole. Loosely secure post 'G' to posts 'J' & 'K' using the supplied Coach Screws.
Ensure the horizontal log is positioned on the deck side of the two upright posts. Attach post 'B' to the pre-driled hole under
post 'G' onto post 'K' The other side of post 'B' is secured to the triangle deck post using a Coach Screw (as positioned
below).
G
I
D
NOTE: The Dimensions for the pre-drilled holes below are purely a reference to using the
correct hole on the upright post. If made to the correct these posts shouldn't require drilling.
SECURE USING
M12 X 230 COACH BOLTS
SECURE USING
M12 X 220 COACH BOLT
SECURE USING
M12 X 150 COACH SCREW
C
195.0
600.0 MAX
90.0

PAGE OF 6 8
Prop posts labelled 'E' & 'F' into the foundation hole. Loosely secure post 'K' & 'M' to posts 'E' & 'F' using the supplied Coach
Bolts. Attach the other ends of posts 'K' & 'M' to the triangle deck frame with the supplied Coach Screws as illustrated.
EF
NOTE: The Dimensions for the pre-drilled holes below are mearly a reference to using
the correct hole on the upright post. If made to the correct these posts won't require drilling.
SECURE USING
M12 X 220 COACH BOLTS
SECURE USING
M12 X 150 COACH SCREWS
K
M
E
F
325.0
65.0
101.5
5.0

PAGE OF 7 8
Secure the end of post labelled 'K' to the pre-drilled hole in upright post 'E' using the supplied Coach Bolt. This should give
post 'K' the correct angle to sit on already connected posts and secure with 2 x Coach Screws. Add the additional logs
'M' & 'N' to the structure securing with M10 X 120 Coach Screws. NOTE: Post 'N' Sits on the underside of an existing log
and is secured with an M12 x 200 Coach Bolt. The hole for this Coach Bolt will need to be positioned and drilled prior to
being able to attach post 'N'.
DRILL & COACH BOLT
POST TO UNDERSIDE
Use the illustrated dimensions as a reference to locate the timber horizontals
In the correct place.
SECURE USING
M12 X 220 COACH BOLT
L
J
N
K
M
E
F
N
L
J
350.0
530.0
305.0
300.0
290.0
130.0

PAGE OF 8 8
Secure the remaining posts to the unit to the dimensions given below using the supplied M10 x 120 Coach Screws.
Dimensions are measured along the width of the timber horizontal.
ATTACH THE ROPES
Finally, with the structure complete the ropes can be
secured to the correct upright posts. With the unit
loosely connected the posts should be able to lean
to the desired angle and to achieve tension in the ropes.
Once the ropes have been secured, the fixings can be
tightened and concrete can be added to the foundations.
Leave concrete to set for 8 Hours.
J
J
250.0
800.0
700.0