Fedders AFUE 2-Stage User manual

95% AFUE 2-Stage,
Variable Speed Furnaces

95% AFUE 2-Stage, Variable Speed Furnaces
Choosing the best furnace for your home requires a balance of comfort,
efficiency and reliability. With a Fedders 95% 2-Stage, Variable Speed
Furnace, you can provide your family with maximum home comfort, while
lowering your monthly energy bills. Fedders’ newest line of furnaces
carry an Annual Fuel Utilization Efficiency (AFUE) rating of 95%, certified
by the Gas Appliance Manufacturers Association (GAMA). The Fedders
95% 2-Stage, Variable Speed Furnace is one of the highest
AFUE rated furnaces in the industry. The two-stage heating combined with
an energy-efficient, variable speed blower motor is the ultimate solution for
year-round home comfort. When coupled with a cooling system, the variable
speed blower motor may improve your home’s cooling system energy
efficiency to Energy Star level, providing additional electricity cost savings
during the cooling season. Available from 54,000 BTUH, all of Fedders’ 95%
2-Stage, Variable Speedfurnaces feature an all-position design in a compact
size, which means they are suitable for a variety of installations. The units
are designed to serve any home heating need and can be matched with
cooling, humidificationand air cleaning products to provide a complete
whole-house air treatment solution.
What does 95% Efficiency mean to you?
How do you lower your home’s heating costs while
gaining the most heating energy efficiency? One
way is by using a higher AFUE rated furnace. The
Annual Fuel Utilization Efficiency system (AFUE)
was established by The Department of Energy
(DOE) to calculate the annual operating cost of
afurnace.
When you install a Fedders 95% AFUE rated
heating system, it means that 95 cents of every
dollar you spend in heating costs goes toward
heating your home. The energy savings is even
greater with a 2-stagefurnace, which adjusts
energyconsumption in response to changes in
indoor temperature. 2-stage furnaces use the
minimum amount ofenergyneeded to heat
your home, while at the same time providing
uniform space temperature. Compare that to a
60% AFUE single-stagefurnacewhich uses only
60 cents of every dollar toward your home’s
heating energy. The other 40 cents is wasted
energy.With today’s high gas prices, the savings
can besignificant when you install a Fedders 95%
AFUE 2-Stage, Variable Speed Furnace!
Maximum Comfort. Maximum Value.

Improved Temperature Control:
Whereas single stage furnaces operate in only one heating mode and
deliver the same amount of heat and airflow no matter what the outside
temperature, 2-stage furnaces offer two stages of heating and provide
homeowners with more precise temperature control. Two-stage furnaces
run on a low heat stage with low airflow for the majority of the time.
The second stage is only activated when more heat is needed to maintain
the desired temperature in the home.
Lower Energy Consumption (Gas and Electric):
Fedders 2-Stage Furnaces employ the latest in electronically commutated
(EC) motor technology. EC motors use less electricity than standard
motors while precisely controlling temperature and airflow. Also, since
2-Stage furnaces run for the majority of the time on low stage heat,
less gas is used, resulting in lower monthly utility bills.
Ultra Quiet Operation:
The Fedders 2-Stage Variable Speed Furnace is designed with both a
variable speed blower motor and a two-stage inducer assembly, which
provide “soft” starts and stops, resulting in ultra-quiet operation.
Why Choose a 2-Stage Variable Speed Furnace
Over a Single Stage Furnace?
Why Choose a 2-Stage Variable Speed Furnace
Over a Single Stage Furnace?
95% AFUE 2-Stage , Variable Speed Furnace Features:
•40" high, for ease of installation
•All-position design
•Stainless steel secondary heat exchanger
•Two-stage induced draft blower
•Integrated hot surface ignition control
with igniter and flame sensor
•Aluminized-steel, multi-port in-shot burners
for smooth ignition, superior flame stability
and low noise
•California low NOxapproved
•Insulated cabinet for increased efficiency
and reduced sound levels
•Single or two-stage thermostat ready
•Supports 14 SEER system combinations
•Supports two-stage cooling units
•Terminals available to power electronic air cleaners
and/or humidifiers
•Built-in self diagnostics with fault code view
without removing the door
•Easily removable blower with slide-out design
•Active and passive dehumidification in conjunction
with cooling system
Warranty:
•
Lifetime limited warranty on heat exchanger
•
5-year limited warranty on all other parts
.

Why Choose
aFedders
95% AFUE
2-Stage
Furnace?
As a leader in indoor
air treatment solutions,
Fedders provides 2-stage
furnaces that combine
state-of-the-art technology
with the highest quality
tobring worry-free
performance and reliability
to your home. All of this,
while getting the most out
ofyour heating dollars!
All product specifications reflect available information at the printing of this brochure.
Fedders reserves the right to revise or modify products and/or specifications without notice.
Copyright © 2008, Fedders North America, Inc.
Fedders is a registered trademark of Fedders North America, Inc.
FeddersCorporation 505 Martinsville Rd. Liberty Corner, NJ 07938 USA
Tel: [phone] Fax: [phone]
F- 952 STAGE- 1107
FD- 102- 1107- d
Fedders produces and markets a
completeline of residential and light
commercial air treatment products and systems,
including central air conditioning systems,
wall mount air conditioners, self-contained indoor
air-cooledand water-cooled packaged units, heat
pump systems, PTAC/PTHP units, air handlers,
room air conditioners and gas furnaces.