FEEDBACK SPORTS PRO TRUING STAND User manual

3-YEAR WARRANTY
Specifications
PRODUCT MANUAL FOR:
DOCUMENT # 17524_REV_C
PRODUCT ITEM # 17525
PRO TRUING STAND
[Wheel and Rotor Service Station]
Feedback Sports Warranty warrants this product to be free from manufacturing defects for a period of 3 years. This warranty does not include
damage to the product resulting from normal wear and tear, accident, misuse, improper installation or operation or unauthorized repair or
alterations. If the product should become defective within the warranty provisions, we will elect to repair or replace it free of charge at our
option, including free return postage, provided it is delivered prepaid to Feedback Sports. Proof of purchase must be submitted with the
returned product All products needing to be sent to Feedback Sports for repair or replacement must have a Return Authorization Number and
will be returned to the sender un-repaired if one is not included. It is the sender’s responsibility to pay for shipment to Feedback Sports. If the
product is determined to fall under warranty, Feedback Sports will pay for return shipping to the customer. Please call Feedback Sports for a
Return Authorization Number and return instructions at 720-536-2369 or e-mail: [email protected]. Products will be repaired or
replaced at Feedback Sports’ discretion. Should Feedback Sports deem a product non-warranty, we will contact the sender for authorization to
repair the product and make arrangements for payment. Feedback Sports Warranty is not transferable, the warranty is no longer valid to anyone
other than the original purchaser.
Dimensions: 11” X 10.75” X 19.5” (28cm X 27cm X 50cm)
Capacity: Up to 29” wheel with tire mounted. 10mm-20mm thru axles up to 157mm wide.
Feedback Sports · 600 Corporate Cir., Suite O Golden, CO 80401 [phone]

FEATURES
SERVICE PARTS
A: Base
B: Swivel Bracket Assembly
C: Mast Assembly
D: Wheel Adapter
E: Indicator Assembly
F: Z-knob with Indicator Tip
G: Indicator Lock Nut
(B) #16523: Swivel Bracket Kit
(D) #16891: Wheel Adapter
(E) #16797: Indicator Assembly
(F) #16814: Z-knob with Indicator Tip
SET UP_STEP 2_INSTALL THE MAST TO BASE
SET UP_STEP 1_ INSTALL THE MAST TO BASE (UNBOXING)
2. Adjust Mast Assembly (C) angle as needed. (FIG.3)
3. Tighten the Swivel bracket Assembly (B) Z knob.
4. If using the wheels quick release axle, skip to
‘FUNCTIONALITY_ TRUING INDICATORS’.
1. Remove Mast Assembly (C) and flip 180 degrees. (FIG.1)
2. Slide the Mast Assembly (C) over the Base (A). (FIG.2)
For additional product information visit: www.Feedbacksports.com
C
D
C
FIG. 3
A
C
F
G
E
D
B
SET UP_STEP 3_INSTALL THE WHEEL ADAPTER
1. Slide the Wheel Adapter (D) into the Mast Assembly (C).
2. Align the notch of the Wheel Adapter with the slot on the Mast.
(FIG. 2)
3. Tighten the Wheel Adapter’s (D) Z-knob.
FUNCTIONALITY_PLACING WHEEL ON STAND
FUNCTIONALITY_ TRUING INDICATORS
FUNCTIONALITY_ MODULAR
Rotor indicator
Disc truing slot
Lateral indicator
Spring tip indicator
Radial indicator
Check wheel hop
FIG. 2
FIG. 4
1. Remove conical wheel support.
2. Place the wheel over the Wheel Adapter (D).
3. Tighten the conical wheel support against the wheel. Ensure the
wheel is centered on both conical supports. (FIG.4)
1. Position Indicator Assembly (E) as needed.
2. Tighten Indicator Lock Nut (G)
Secures to the top of all Feedback Sports upright repair stands.
G
E
D
A
A
C
B
FIG. 1 FIG. 2