Feelux NDPro User manual

NDPro Showcase of 3
8/2018
FEELUX Lighting, Inc., 3000 Northwoods Parkway, Suite 165, Peachtree Corners, GA 30071 | Tel: [phone] | feeluxlighting.com
If you have any questions, please contact your local Feelux Representative. Specifications subject to change without notice. All Rights Reserved. ⓒ 2018 Feelux Lighting, Inc.
1
NDPro Showcase Arm
0.59″(15mm)
ø1.02″
(26mm)
11.33″(287.7mm)
1.85″(46.9mm)
A
0.59″(15mm)
B
• Alumimum body with rotating top bar
• Easy assembly with NDPro fixture
• Various length available
• Ideal for showcase or exhibition
PRODUCT FEATURES DIMENSIONS
Rotate
FLX Stix NDPro Fixture Lamp Power Luminous Flux
(4000K)
A
(Top Length)
B
(Recommended Distance
for Mounting Holes)
NDP4 40K-24V-C90 4W 300 lm 15.6″(396.5mm) 15″(381mm)
NDP7 40K-24V-C90 7W 570 lm 26.6″(676.5mm) 26″(661mm)
NDP11 40K-24V-C90 11W 860 lm 37.6″(955.5mm) 37″(940mm)
NDP15 40K-24V-C90 15W 1,210 lm 48.6″(1234.5mm) 48″(1219mm)

NDPro Showcase Arm
Show Case of 1
7/2018
FEELUX Lighting, Inc., 3000 Northwoods Parkway, Suite 165, Peachtree Corners, GA 30071 | Tel: [phone] | feeluxlighting.com
If you have any questions, please contact your local Feelux Representative. Specifications subject to change without notice. All Rights Reserved. ⓒ 2018 Feelux Lighting, Inc.
2
* Item are sold separately
LED Driver
FLX Stix NDPro
Top Bar
Fix Cover
Hole guide
Side Pole
Power Pole
Mounting Base
Mounting Base Cover
Screw
Required Accessories
INSTALLATION
NDP Showcase Arm
Kit
NDP Showcase Arm
Top Bar
1. Rotate Top Bar to desired position
and check NDPro lighting fixture is
on and functioning properly.
Step.8
1. Insert Side Pole and Power Pole
onto Mounting Base Cover.
2. Connect power cord from Power
Pole to FLC30/FLC75 LED driver.
Step.7
Drill ø1.02″(26mm)
hole
Step.3
1. Drill ø26mm holes to insert
Mounting Base.
2.Fix Mounting Base with screws and
attach Mounting Base Cover on top.
1. Connect Top Bar with Side Pole and
Power Pole on each side.
2. Tighten the screw on both Side
Pole and Power Pole for assembly
stability.
Step.4
NDP
Step.5
1. Connect NDPro fixture to power
cable from Power Pole.
a
b
c
d
a
a
b
b
c
e
g
i
f
h
d
e
g
i
j
j
f
h
Step.6
1. Mount NDPro fixture on Top Bar
with magnets.
2. Push and insert Fix Cover to cover
both ends for clean look.
①
②
②
Step.1
1. Place the Top Bar onto the deck.
2. Insert the hole guides into both
ends of Top Bar.
Step.2
1. Mark the hole to determine the
location to drill.

NDPro Showcase Arm
NDPro Showcase of 3
8/2018
FEELUX Lighting, Inc., 3000 Northwoods Parkway, Suite 165, Peachtree Corners, GA 30071 | Tel: [phone] | feeluxlighting.com
If you have any questions, please contact your local Feelux Representative. Specifications subject to change without notice. All Rights Reserved. ⓒ 2018 Feelux Lighting, Inc.
3
BEAM SPREADS
COMPONENTS
NDP4 40K-24V-C90
75.32 lm/W
270.40 lm
NDP7 40K-24V-C90
74.59 lm/W
531.00 lm
NDP11 40K-24V-C90
74.75 lm/W
797.05 lm
NDP15 40K-24V-C90
75.26 lm/W
1078.47 lm
NDP Showcase Arm Kit NDP Showcase Arm Top
Bar
LED Dirver
__ NDP-SA-Kit __ NDP4-SA-Kit-TB
__ NDP7-SA-Kit-TB
__ NDP11-SA-Kit-TB
__ NDP15-SA-Kit-TB
NDPro Fixture
__ NDP4-(color)K-24V
__ NDP7-(color)K-24V
__ NDP11-(color)K-24V
__ NDP15-(color)K-24V
__ FLC30-24V
__ FLC75-24V
CO / C180 cd / 1000lm C90 / C270
100
200
300
150° 180° 150°
30° 0° 30°
120°
90°
60°
120°
90°
60°
CO / C180 cd / 1000lm C90 / C270
100
200
300
150° 180° 150°
30° 0° 30°
120°
90°
60°
120°
90°
60°
CO / C180 cd / 1000lm C90 / C270
100
200
300
150° 180° 150°
30° 0° 30°
120°
90°
60°
120°
90°
60°
CO / C180 cd / 1000lm C90 / C270
100
200
300
150° 180° 150°
30° 0° 30°
120°
90°
60°
120°
90°
60°