Altelix BMP-EER1-DIN User manual

BMP-EER1-DIN & BMP-EER3-DIN
Installation Guide
Altelix LLC USA: 866-660-WIFI (9434) International: [phone] [email protected] www.altelix.com
Copyright (C) 2023 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC.
Specifications are subject to change without notice. See www.altelix.com for most current information
IS0202 Rev B 07/26/23 eero™® is a trademark of EERO, LLC
BMP-EER1-DIN Shown

BMP-EER1-DIN & BMP-EER3-DIN Installation Guide
The BMP-EER1-DIN and BMP-EER3-DIN are designed to mount directly to a
35mm Top Hat DIN rail using the supplied DIN rail mounting clip.
DIN Rail Mounting Clip
(Optional Step) For additional security and
installations subject to vibrations, an optional
hook and loop strap is provided to secure the
eero device in the mounting cradle.
To install, using the supplied hardware
attach the DIN rail mounting clip to the
back of the mount as shown.
Once mounted to a DIN rail, insert the
eero device into the cradle as shown.
Hook and Loop Strap
Note: 35mm Top Hat DIN rail not included.
BMP-EER1-DIN Shown
IS0202 Rev B 07/26/23