Feit Electric CAM/PAN/WIFI User manual

Model: CAM/PAN/WIFI
READ BEFORE INSTALLATION
SAVE THESE INSTRUCTIONS
Questions, problems, missing parts? Before returning to the store,
call Feit Electric Customer Service
8 a.m. - 5 p.m., PST, Monday - Friday
We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this Smart Indoor Camera. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Feit Electric.
1-866-326-BULB (2852)
FEIT.COM
IMPORTANT SAFETY INSTRUCTIONS
AND INSTALLATION GUIDE
SMART INDOOR CAMERA
REV010
Feit Electric app
Works with
Only supports
2.4GHz Wi-Fi
Networks

Limited Warranty
Table of Contents
Safety Information SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS:
ALWAYS FOLLOW BASIC SAFETY PRECAUTIONS WHEN USING ELECTRICAL
PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT.
This product is warranted to be free from defects in workmanship and materials for up to one year from date of purchase. If the product fails within the warranty period,
please contact Feit Electric at [email protected], visit feit.com/contact-us or call 1-866 326-BULB (2852) for instructions on replacement or refund. REPLACEMENT OR REFUND
IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of
incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state or province to province.
2 WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Table of Contents ................................... 2
Safety Information .................................. 2
FCC Statement ...................................... 2
Warranty .......................................... 2
Pre-Assembly ...................................... 3
Description
Bracket Installation
.........................................
..................................
4
5
Adhesive Installation.................................6
App Setup
Trouble Shooting
Need Help?
..........................................
.....................................
..........................................
7
7
7
Supplier’s Declaration of Conformity:
47 CFR § 2.1077 Compliance Information
Responsible Party:
Feit Electric Company
4901 Gregg Road,
Pico Rivera, CA 90660, USA
562-463-2852
Unique Identifier:
CAM/PAN/WIFI
SD™, microSD™, and SDHC™ are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries, or both. Feit Electric app
Works with
Only supports
2.4GHz Wi-Fi
Networks
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the
equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer
or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to
operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
The device can be used in mobile (min 7.87 in.) exposure condition without restriction.
CAUTION: Please read all information carefully before
installation.
CAUTION: Intended for indoor use. ONLY FOR DRY
LOCATIONS.

3
Pre-Assembly
AA BB
NOTE: Hardware not shown to actual size.
HARDWARE INCLUDED
TOOLS REQUIRED TO MOUNT CAMERA
Part Description Quantity
AA 1
1
1
Smart Indoor Camera
BB Power Adapter
USB Cord
1Mounting Bracket
DD
1Double-Sided Tape
EE
1
3
Mounting Screws
FF
Mounting AnchorsGG
1
Reset Pin
HH
CC
WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
CC DD EE GG HHFF
PHILLIPS
SCREWDRIVER
POWER DRILL
PENCIL

Description
4 WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Input Power (Micro USB): 5VDC, Max. 1A
Status Light
Blinking RED = Pairing Mode
Solid RED = No Wi-Fi Connection
Blinking BLUE = Connecting to Wi-Fi
Solid BLUE = Connected to Internet
SD Card Slot Only support microSD cards 128GB (FAT32 format) or less.
Reset Press and hold for 5 seconds with the Reset Pin (HH) to reset the camera.
Status Light Microphone
Speaker
Micro USB
Reset
SD Card Slot
RESET
SD

DD
1Install with Bracket
5WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Bracket Installation
Mark screw positions using the Mounting Bracket (DD) on your wall.
Drill holes at the marked points if installing on surface such as concrete, brick or drywall. Insert Mounting Anchors
(FF) into holes. You can skip this step if installing on wood or siding.
Use the Mounting Screws (FF) to attach the Mounting Bracket (DD) to the wall.
2Lock Smart Indoor Camera in place
Plug in your Smart Indoor Camera (AA) with the provided USB Cord (CC). Attach the Smart Indoor Camera (AA)
to the Mounting Bracket (DD). Turn the base of the camera to lock it in place. Connect the USB Cord (CC) to the
Power Adapter (BB) provided.
DD
AA
DD
FF
GG

6WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Adhesive Installation
1Attaching the Camera Using Double-Sided Tape
Clean the mounting area thoroughly (surface must be free of dust, dirt or grease) and plug in your Smart Indoor
Camera (AA) with the provided USB Cord (CC).
Attach the Smart Indoor Camera (AA) to the Mounting Bracket (DD) and turn the base of the camera to lock it in place.
Stick Double-Sided Tape (EE) at the bottom of the Mounting Bracket (DD). Peel the Double-Sided Tape (EE) and place
your Smart Indoor Camera (AA) on a flat surface. Connect the USB Cord (CC) to the Power Adapter (BB) provided.
Apply to the
Mounting Bracket
Peel off the
Double-Sided Tape
EE
DD
AA

Troubleshooting
7WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
APP Setup
• Search for the Feit Electric app in the
App Store or Google Play Store.
• Download and install the Feit Electric
app on your smart device.
• Tap Add Device or the + sign, then select Camera and
confirm. You will be prompted to enter your
Wi-Fi network and password.
Set up the smart indoor camera using
the Feit Electric app
Download and install the Feit Electric app
• Check to be sure the camera is in pairing mode. The RED
indicator light must be blinking rapidly to connect. If not
already blinking, press and hold the Reset Button until you
hear an audible tone. Use the Feit Electric app to complete
the set up.
Be sure to connect to a 2.4 GHz
Wi-Fi network that covers your
installation location.
Feit Electric App
PROBLEM CORRECTIVE ACTION
Camera will not connect
to my Wi-Fi network
The camera is off-line
Live video stream is slow
to load
How to reset the camera
to reenter pairing mode?
How can I check the
available space on the
SD Card?
The camera is not
recording?
What happens when the
microSD card reaches
full capacity?
How do I set the camera
to Event or Continuous
Recording?
Can I use a new microSD
card if I do not want to
record over existing videos?
What do the blinking
LEDs mean?
• Make sure the LED is blinking red. If the LED is not blinking red, you will need to press and hold Reset Button
(see the Description section).
• Make sure the Wi-Fi network is a 2.4GHz network, device will not connect to a 5GHz network.
• Test your Wi-Fi network with other devices such as your phone or computer to make sure it is operating properly.
• The Wi-Fi connection may be out of range during pairing. Use your phone to check range, it is recommended to
have at least 2 signal bars showing for proper connection.
• Your Wi-Fi network password is case sensitive, make sure you are entering it correctly.
• There could be a temporary issue with your internet connection (e.g., service disruption). Please try again in
a few minutes.
• Make sure your Wi-Fi router is turned On.
• The camera may not have power to it, make sure the wall switch and breaker is in the On position.
• Make sure the camera is getting a good signal from your Wi-Fi router. Use your phone to check range, it is
recommended to have at least 2 signal bars showing for proper connection.
• The camera may have been disconnected from your Wi-Fi network, press and hold Reset Button (see the Description
section) until you see a blinking red LED and hear an audible tone.
• Blinking RED = Pairing Mode
• Solid RED = No Wi-Fi Connection
• Blinking BLUE = Connecting to Wi-Fi
• Solid BLUE = Connected to Internet
Camera streaming issues may be caused by any of the following:
• Your phone's cellular connection, which relies on mobile coverage.
• Limited internet bandwidth at home. For example, other video streaming services running at the same time on your
network can cause congestion slowing down the internet upload and download speeds.
• Wi-Fi reception may not be stable or work reliably if the camera's Wi-Fi signal strength is less than 2 signal bars. You
may need to install a Wi-Fi repeater or extender to boost the Wi-Fi signal.
• Yes, you can use a new microSD card if you do not want to record over existing videos by removing the side cover on
the camera and replacing the exiting microSD card with a new one as long as it does not exceed 128GB. Once this is
completed you will need to format the microSD card by going to the SD Card Settings in the Settings menu and
pressing Format SD Card then Confirm.
WARNING: Reformatting microSD card will delete all content stored on card.
• Press and hold reset button (see the Description section) until you see a blinking red LED and hear an audible tone.
• Make sure Record Switch is turned On in app, under SD Card Settings. This is located in the Settings menu on the
upper right corner in the control panel.
• Make sure that the microSD card is installed correctly. To confirm the camera is recognizing the microSD card, go to the
SD Card Settings in the Settings menu and make sure microSD Card Capacity menu shows Total Capacity, Used and
Free Space. If this does not appear you may consider reformatting the microSD card.
WARNING: Reformatting microSD card will delete all videos stored on card. Please go through the
trouble-shooting section before doing so or contact our Customer Support Team.
• In the Settings menu under SD Card Settings make sure Record Switch is turned On and then select Event
Recording or Continuous Recording.
• Once the microSD card reaches full capacity, new videos will start rewriting (deleting) over the oldest videos.
• In the Settings menu under SD Card Settings, you will see Used Space and Free Space.
Note: Camera only support microSD cards 128GB (FAT32 format) or less.
FAQs and the latest versions of user guides can be found at
feit.com/help and feit.com/smart.
Need Help?
To reach customer support please visit feit.com/contact-us