Feniex FUSION FN-1719 User manual

FENIEX // 2019 // INSTRUCTION MANUAL
WEB // www.feniexindustries.com
Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the United States and other countries
preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make
derivative works of the copyrighted material. Accordingly, any copyrighted material of Feniex and its licensors contained herein or in the Feniex products described in this Price
List may not be copied, reproduced, distributed, merged or modied, transmitted, transcribed, stored in retrieval system or translated into any language or computer language,
in any form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S. Patent & Trademark Oce.
FN-1719
PILLAR MOUNT
INSTRUCTION
MANUAL
TM

Safety Regulations & Warranty 3
Service after Expiration 3
Copyright 3
Feniex Product Copyright 3
Specications & Flash Patterns 4
Flash Patterns 4
Specications 4
Dimensions 4
Wiring & Conguration 5
Wiring Diagram 5
Setting Master/Slave 5
Patterns & Synchronization 5
TABLE OF CONTENTS
FENIEX // 2019 // INSTRUCTION MANUAL // v1.0
WEB // www.feniexindustries.com
2
TM

SAFETY REGULATIONS
The following provides all the information necessary to
safely operate the previously listed products of Feniex
Industries, Inc. Please read this manual thoroughly before
installing or operating your new product in order to
prevent any damage or injury. Failure to follow the listed
instructions in this manual may result in damage to your
products or personal injury.
• Proper installation of this product requires good
knowledge of automotive systems, electronics &
procedures.
• Please guarantee all vital components of the vehicle
are not in danger of being damaged by drilling holes
necessary for installation. Check all sides of the
mounting surface before drilling any holes into the
vehicle.
• Do not install this product in any way that interferes
with the deployment of the air bag. Doing so may
damage the eectiveness of the air bag & can lead to
serious personal and vehicle injury. The installer will
assume full responsibility of proper installation of the
new unit.
• Please clean the mounting surface before installation
of the unit when using tape, brackets, magnet, Velcro or
suction cups.
• The product’s ground wire must be connected directly
to the negative (-) battery post for eective use of the
unit. Please follow all wiring guidelines provided to
guarantee long lifespan & productivity. Failing to follow
these instructions may result in damage to the product.
WARRANTY
Feniex Industries, Inc. warrants to the original purchaser
that the product shall be free from defects in material &
workmanship for 5 years from the date of purchase for
all LED products. Feniex Industries warranties speakers,
sirens, ashers, & controllers for 2 years.
If warranty service is needed, please contact customer
support:
Phone: [phone]
Web Site: www.Feniex.com/support
Email: [e-mail]
If the product needs to be returned for repair or
replacement, contact our customer service team (using
any method listed above) to receive a Return Merchandise
Authorization (RMA) number. Operational times are from 9
a.m. to 6 p.m. central time, Monday through Friday.
CONDITIONS
Feniex Industries, Inc. will not be held responsible for any
costs associated with equipment removal and/or
re-installation resulting from a warranty claim. It is the sole
responsibility of the party initiating a warranty claim to pay
shipping charges associated with returning a product to
Feniex Industries for repair or replacement.
SERVICE AFTER EXPIRATION
Feniex Industries will still provide service for all products
after expiration of the warranty. For any issues, call the
customer support line. In some instances it may be
necessary for the product to be shipped, freight prepaid
and insured for loss or damage to Feniex headquarters.
SAFETY REGULATIONS & WARRANTY
Utilizing non-factory screws and mounting brackets may result
in the loss of warranty coverage.
COPYRIGHT
This instruction manual and the Feniex products
described in this instruction manual may include or
describe copyrighted Feniex material. Laws in the United
States and other countries preserve for Feniex Industries
and its licensors certain exclusive rights for copyrighted
material, including the exclusive right to copy, reproduce
in any form, distribute and make derivative works of
the copyrighted material. Accordingly, any copyrighted
material of Feniex and its licensors contained herein or in
the Feniex products described in this instruction manual
may not be copied, reproduced, distributed, merged
or modied in any manner without the express written
permission of Feniex Industries, Inc.
FENIEX PRODUCT COPYRIGHTS
The products described in this document are the property
of Feniex Industries, Inc. It is furnished by express license
agreement only and may be used only in accordance with the
terms of such an agreement. Products and documentation
are copyrighted materials. Making unauthorized copies is
prohibited by law. No part of the product or documentation
may be reproduced, transmitted, transcribed, stored in
retrieval system or translated into any language or computer
language, in any form or by any means, without prior
permission from Feniex Industries, Inc.
Please do not send in product without contacting support rst
for a Return Merchandise Authorization (RMA) number.
FENIEX // 2019 // INSTRUCTION MANUAL // v1.0
WEB // www.feniexindustries.com
3
TM

SPECIFICATIONS & FLASH PATTERNS
SYSTEM SPECIFICATIONS
Input Power 12 VDC
Current Draw 4.5A
External Fuse 125% of Circuit Load
Colors R, A, B, W, G, RW, BW, AW, RB, RA, BA
SAE Certification J595, CT13, SAE J1113-11
Flash Patterns 11 [Single Color ], 40 [Dual Color]
Dimensions 19.75" H x 6.25" L x 6.4" W
Light Spread 40° or 180° Interchangable Optics
Mounting Vehicle Specic
Warranty 5 Years
FLASH PATTERNS: DUAL COLOR
1. Color 1- Single Slow 21. Color 1&2 / No O
Time- Single Combo
2. Color 1- Single Fast 22. Color 1&2 / No O
Time- Double Slow
3. Color 1- Single Combo 23. Color 1&2 / No O
Time- Double Fast
4. Color 1- Double Slow 24. Color 1&2 / No O
Time- Double Combo
5. Color 1- Double Fast 25. Color 1&2 / No O
Time- Triple Slow
6. Color 1- Double Combo 26. Color 1&2 / No O
Time- Triple Fast
7. Color 1- Triple Slow 27. Color 1&2 / No O
Time- Triple Combo
8. Color 1- Triple Fast 28. Color 1&2 /O Time-
Single Slow
9. Color 1- Triple Combo 29. Color 1&2 /O Time-
Single Fast
10. Color 2- Single Slow 30. Color 1&2 /O Time-
Single Combo
11. Color 2- Single Fast 31. Color 1&2 /O Time-
Double Slow
12. Color 2- Single Combo 32. Color 1&2 /O Time-
Double Fast
13. Color 2- Double Slow 33. Color 1&2 /O Time-
Double Combo
14. Color 2- Double Fast 34. Color 1&2 /O Time-
Triple Slow
15. Color 2- Double
Combo
35. Color 1&2 /O Time-
Triple Fast
16. Color 2- Triple Slow 36. Color 1&2 /O Time-
Triple Combo
17. Color 2- Triple Fast 37. Color 1- Brake Pop
18. Color 2- Triple Combo 38. Color 2- Brake Pop
19. Color 1&2 / No O
Time- Single Slow
39. Color 1- Steady On
20. Color 1&2 / No O
Time- Single Fast
40. Color 2- Steady On
FENIEX // 2019 // INSTRUCTION MANUAL // v1.0
WEB // www.feniexindustries.com
4
TM
FLASH PATTERNS: SINGLE COLOR
1. Single Slow 7. Triple Slow
2. Single Fast 8. Triple Fast
3. Single Combo 9. Triple Combo
4. Double Slow 10. Brake Pop
5. Double Fast 11. Steady On
6. Double Combo

WIRING, CLEANING & CONFIGURATION INSTRUCTIONS
CLEANING INSTRUCTIONS:
1. To obtain optimum adhesion, the bonding surfaces
must be well unied, clean and dry. Typical surface
cleaning solvents are IPA/water mixture (rubbing alcohol)
or heptane (non-amonia de-greaser).
2. Apply base tape to Pillar Mount rst. Align it and make
sure not to cover rear window sprayer. Press the Pillar
Mount onto surface. Bond strength is dependent upon
the amount of adhesive-to-surface contact developed.
Generally, this means that the tape should experience at
least 15 psi (100 kPa) in roll down or platen pressure.
3. After application, the bond strength will increase as the
adhesive ows onto the surface. Full adhesion is reached
after 72 hours.
Refer to 3M Surface preparation document for detailed
instructions.
Surface Prep:
http://multimedia.3m.com/mws/media/66019O/
vhbtm-tape-surface-preparation-technical-bulletin.
pdf?&fn=87015.pdf
Tape Product Description:
https://multimedia.3m.com/mws/
media/67100O/3mtm-vhb-tapes.pdf
WIRING INSTRUCTIONS:
1. To activate the unit, extend the red (+) or yellow (+) wire
to a 12V post. Extend the black (-) wire to the ground post
of the vehicle's battery. Please note that mode 2 overrides
mode 1.
2. Momentarily connect the blue wire to the Ground (12V-)
to cycle through the ash patterns.
3. Synchronization: To Sync two or more light heads
together:
A. Apply 12V+ power to the red or yellow (+) wire and
apply 12V- to black wire to power the unit on.
B. Cycle through all patterns by tapping the blue (ash
pattern changer) wire to the activated black, ground wire
until the desired pattern is selected.
C. Connect one of the same colored mode wires (red or
yellow) of the two light heads together; connect the black
wires of the light heads together and then connect the
blue wires of the light heads together.
ALTERNATE LIGHT HEADS:
D. Follow steps A-B.
E. For the light heads to alternate, one light head must be set
as master and the other as slave on the mode wire intended
for use. To do so, hold the blue (ash pattern changer) wire
to ground for 3 seconds.
For Single color: if all LEDs turn on, this indicates master
mode. If no LEDs turn on, this indicates slave mode.
For Dual color: if all LEDs turn on, this indicates master
mode. If half of the LEDs turn on, this indicates slave
mode.
F. Follow step C. Change patterns by tapping the blue wire
to the activated black ground wire.
COLOR FUNCTION POLARITY CONNECTION
Red Mode 1 12v (+) Latching Switch
Yellow Mode 2 12v (+) Latching Switch
Black Ground 12v (-) Chasis Ground
Blue Pattern 12v (-) Momentary Switch
WIRING DIAGRAM
FENIEX // 2019 // INSTRUCTION MANUAL // v1.0
WEB // www.feniexindustries.com
5
TM