
16
Contact your Authorized Ferrari Dealer
directly and bring the following with you:
- all the keys in your possession
- the CODE CARD for the Ferrari
CODE system
- a personal identity document
- the documents proving ownership of the
vehicle
The codes of the keys that are not
available when the new memorization
procedure is performed will be deleted
from the memory, in order to prevent that
any lost or stolen keys are used to start
the vehicle.
Emergency starting
If the Ferrari CODE is unable to deacti-
vate the immobilizer:
- the CODE warning light remains perma-
nently on
- the OBD warning light goes off after
four seconds and comes back on im-
mediately afterwards
- the engine does not start.
In this condition, the engine can only be
started with the emergency procedure.
We recommend you read the whole
procedure carefully before perform-
ing it.
If you make a mistake during the emergen-
cy procedure, turn the key to position 0
and repeat the operation from point 1.
1) Read the 5-digit electronic code found
on the CODE CARD.
2) Turn the key to position II: at this
point, the CODE and OBD warning
lights are on.
3) Fully depress and hold the accelerator
pedal. Approximately 8 seconds later,
the OBD warning light will go off.
Release the accelerator pedal and get
ready to count the number of times
the OBD warning light flashes.
4) As soon as the number of flashes is
equal to the first digit of your CODE
CARD, depress the accelerator pedal
and hold it until the OBD warning
light goes off (after approximately 4
seconds), then release the accelerator
pedal.
5) The OBD warning light starts flash-
ing again. As soon as the number of
flashes is equal to the second digit of
your CODE CARD, depress the ac-
celerator pedal and hold it down.
6) Follow the same procedure for the
remaining digits in the code on the
CODE CARD.
7) When the last digit has been entered,
hold the accelerator pedal down. The
OBD warning light comes on for 4
seconds and then goes off. You can
now release the accelerator pedal.
8) A quick flashing of the OBD warning
light (about 4 seconds) confirms that
the operation has been successful.
9) Start the engine.
If the OBD warning light remains on, turn
the key to 0 and repeat the procedure
from step 1.
This procedure can be repeated an unlim-
ited number of times.
After an emergency starting proce-
dure, it is advisable to contact your
Authorized Ferrari Dealer to
resolve any problem. Otherwise, you
will have to perform the emergency
starting procedure every time the
engine is started.