Festive Lights SL159 User manual

In the interest of safe and proper use of this product, please read these instructions carefully and retain
them for future reference.
Contents:
Main unit and solar pump (When opening the packaging, please ensure all of the parts are complete.)
MADE IN CHINA
Assembly:
1. Unpack all components carefully.
2. Place reservoir on top of the base and twist the reservoir clockwise to fit together as shown in diagram.
3. Connect the pump cable to the socket on the bottom of the solar panel, then connect the tube
between the vent of the pump and the connection underneath the solar panel.
4. Pour enough water into the reservoir bowl and ensure the pump is fully submerged when placing the
solar pump on top of the sprinkler bowl.
5. Connect the desired sprinkle head to the fountain head on the solar panel for different sprinkle
functions.
Operation:
1. The solar panel works by generating energy from sunlight, converting it into an electrical current which
charges the rechargeable batteries. These batteries then power the pump. When switched on, an in-built
sensor controls the lights. The level of battery charge and duration of light time depends on the amount
of sunlight received, so the lights will remain illuminated for longer during the summer months. (Note:
LED lights will only function at night).
A: Turn the switch to the “I” position, the pump will run every day by solar, the lights will illuminate at
night.
B: Turn the switch to the “O” position, this will turn the pump off and charge the solar battery.
C: If the battery is fully charged, you can turn the switch to the "I" position at night and the pump will run
for 6 hours.
Caution:
• This product is suitable for outdoor use although it cannot be used, or submerged in water. If the
product becomes damaged, the product must be disposed of accordingly.
• This product MUST NOT BE MODIFIED. If any modifications are made, this will invalidate the warranty
and may render the product unsafe.
• This product is designed for decorative purpose only. Keep out of reach from children and animals.
• The LEDS in this light cannot be replaced.
• Do not position this product near any source of direct heat.
Note: the life span of this product is subject to the way in which it is handled, during use and storage.
Base
Resevoir Bowl
Sprinkler Bowl
Base
Resevoir Bowl
Sprinkler Bowl
Solar Pump
“ I ”
“ O ”
“ I ”
“ O ”
Solar Pump
Solar Water Feature
Outdoor use
SL160 Two-Tiered Pagoda
Solar Water Feature
SL159 Victoriana Tiered
Solar Water Feature
SL161 Neapolitan Tiered
Solar Water Feature

MADE IN CHINA
.
Weather:
Switch to “I” position:
1. Pump is on
2. Charge extra solar energy to
battery
Switch to “O” position :
1. Pump is off
2. Charge full solar
energy to battery
Solar runs the pump and charges the battery.
Pump performance is maintained when the
clouds pass. The pump will run on for 1 hour
longer into the evening.
Solar runs the pump and supplies extra energy to
the battery. Performance is maintained when the
clouds pass. The pump will run for a shorter
period of time into the evening.
The pump will only run when there is sufficient
power from the battery. If little or no battery
charging occurs the pump performance is not
maintained.
No solar power is available, the pump will not run
and the battery will not charge.
Battery should fully charge in 1
day.
Battery will take 2 to 3 days to
fully charge.
Battery will take several days to
fully charge.
Battery will not charge.
If the pump stops running when the switch is on the “I” position (when cloudy or at night), you can run
the pump for a couple of hours extra by turning the switch from (I) to (O) to (I), the pump will now run
until battery flat. A fully charged battery will run for a maximum on 6 hours.
(Note: LED lights will only function at night).
This product comes with a 12 month manufacturer’s warranty against failure to all parts. If you have a
warranty claim, please use the contact details below. For any technical information relating to this
product, please email Festive Lights Ltd on [email protected]. We aim to respond within 2
working days. Alternatively, please contact our help line on [phone].
This service is available between 9.00am-5.00pm Monday to Friday.
Cleaning and Maintenance:
Solar panel: The panel should be cleaned occasionally with a clean soft cloth. Regular cleaning of
the panel is advised to maintain optimum conversion of the sun’s energy into direct current.
Pump: lf, after a period of time, the pump starts to lose power or stops working check for the build
up of sediment, scale or dirt in the filter. Remove the pump cover and the impeller cover. Take out the
impeller and remove any sediment, scale or dirt that has built up. Take out the two filter units from each
end of the pump and wash them with running water.
Impeller
Impeller Cover Filter Open the Pump
I
O
I
O