Festo CP-E08-M12-CL User manual

Electronics manual
CP modules
Input modules
typeCP−E08−M12−CL
typeCP−E08−M8−CL
typeCP−E16−KL−CL
Output module
typeCP−A04−M12−CL
Manual
539 300
en 0404NH
[681 792]
Compact performance

Contents and general instructions
I
Festo P.BE−CPEA−CL−EN en 0404NH
Authors P. Mauch, H. Hohner. . . . . . . . . . . . . . . . . . . . . . . .
Editor M. Holder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Original de. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Edition en 0404NH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Designation P.BE−CPEA−CL−EN. . . . . . . . . . . . . . . . . . . . . . . .
Order no. 539 300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E(Festo AG&Co. KG, D73726 Esslingen, Federal Republic of
Germany, 2004)
Internet: http://www.festo.com
E−Mail: [e-mail]
The reproduction, distribution and utilization of this
document as well as the communicaton of its contents to
others without express authorization is prohibited.
Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of a patent,
utility module or design.

Contents and general instructions
II Festo P.BE−CPEA−CL−EN en 0404NH

Contents and general instructions
III
Festo P.BE−CPEA−CL−EN en 0404NH
Contents
Designated use V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Target group VI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service VI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important user instructions VII. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes on the use of this manual IX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. System summary CP system 1−1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 Setting up CP systems 1−3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.1 Method of operation of the CP system 1−5. . . . . . . . . . . . . . . . . . . . . . .
1.1.2 Variants of the CP system 1−7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.3 Use of the I/O modules 1−11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.4 Basic rules for addressing 1−13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Input modules type CP−E08−M...−CL and CP−E16−KL−CL 2−1. . . . . . . . . . . . . . . .
2.1 Function of the input modules CP−E08−M...−CL and CP−E16−KL−CL 2−3. . . . . . . . .
2.1.1 Display and connecting elements 2−4. . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Fitting 2−7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 Installation 2−8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.1 Connecting sensors 2−9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.2 Connect the input module to the CP string 2−12. . . . . . . . . . . . . . . . . . .
2.4 Diagnosis 2−14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4.1 Diagnosis via LEDs 2−14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4.2 Diagnosis via the field bus 2−17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Output modules type CP−A04−M12−CL 3−1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1 Function of output module type CP−A04−M12−CL 3−3. . . . . . . . . . . . . . . . . . . . . .
3.1.1 Display and connecting elements 3−4
. . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 Fitting 3−5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3 Installation 3−6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3.1 Connecting the actuators 3−7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3.2 Connect the output module to the CP string 3−8. . . . . . . . . . . . . . . . . .

Contents and general instructions
IV Festo P.BE−CPEA−CL−EN en 0404NH
3.4 Diagnosis 3−10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.1 Diagnosis via LEDs 3−10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.2 Diagnosis via the field bus 3−13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A. Technical appendix A−1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.1 Technical specifications A−3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.1.1 General technical specifications A−3. . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.1.2 Technical specifications of the input modules A−4. . . . . . . . . . . . . . . . .
A.1.3 Technical specifications of the output modules A−6. . . . . . . . . . . . . . .
A.2 Internal structure of the inputs A−7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.2.1 Internal structure type CP−E08−M12−CL A−7. . . . . . . . . . . . . . . . . . . . . .
A.2.2 Internal structure type CP−E08−M8−CL A−8. . . . . . . . . . . . . . . . . . . . . . .
A.2.3 Internal structure type CP−E16−KL−CL A−9. . . . . . . . . . . . . . . . . . . . . . . .
A.3 Internal structure of the outputs A−10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.3.1 Internal structure type CP−A04−M12−CL A−10. . . . . . . . . . . . . . . . . . . . . .
A.4 Examples of circuitry A−11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.4.1 Circuitry examples for inputs A−11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.4.2 Circuitry example for outputs A−15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.5 Accessories A−17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.5.1 General accessories A−17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.5.2 Accessories for modules with M12 connection A−17. . . . . . . . . . . . . . . .
A.5.3 Accessories for modules with M8 connection A−18. . . . . . . . . . . . . . . . .
A.5.4 Connector sets for input module type CP−E16−KL−CL A−19. . . . . . . . . . . .
B. Index B−1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B.1 Index B−3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents and general instructions
V
Festo P.BE−CPEA−CL−EN en 0404NH
Designated use
The CP modules described in this manual are intended
exclusively for use on a CP string on a CP master
(e.g. CPX−CP interface, CP field bus node, CPV Direct).
The CP modules may only be used as follows:
asintended in industrial installations
 without any modifications by the user
Only the conversions or modifications described in the
documentation supplied with the product are permitted.
infaultless technical condition.
If used together with additional commercially available com
ponents, such as sensors and actuators, the specified limits
for pressures, temperatures, electrical data, torques etc.
must be observed.
Observe also the standards specified in the relevant chapters,
as well as national and local laws and technical regulations.
Use only power units which guarantee reliable isolation of the
operating voltages as per IEC 742/EN 60742/VDE 0551 with
at least 4 kV isolation resistance (Protected Extra Low Voltage
PELV). Switch power packs are permitted, providing they
guarantee reliable isolation in accordance with EN 60950/
VDE0805.

Contents and general instructions
VI Festo P.BE−CPEA−CL−EN en 0404NH
Target group
This manual is directed exclusively at technicians trained in
control and automation technology.
Service
Please consult your local Festo repair service if you have any
technical problems.

Contents and general instructions
VII
Festo P.BE−CPEA−CL−EN en 0404NH
Important user instructions
Danger categories
This manual contains instructions on the possible dangers
which may occur if the product is not used correctly. These
instructions are marked (Warning, Caution, etc.), printed on a
shaded background and marked additionally with a picto
gram. A distinction is made between the following danger
warnings:
Warning
This means that failure to observe this instruction may
result in serious personal injury or damage to property.
Caution
This means that failure to observe this instruction may
result in personal injury or damage to property.
Please note
This means that failure to observe this instruction may
result in damage to property.
The following pictogram marks passages in the text which
describe activities with electrostatically sensitive compo
nents.
Electrostatically sensitive components may be damaged if
they are not handled correctly.

Contents and general instructions
VIII Festo P.BE−CPEA−CL−EN en 0404NH
Marking special information
The following pictograms mark passages in the text contain
ing special information.
Pictograms
Information:
Recommendations, tips and references to other sources of
information.
Accessories:
Information on necessary or sensible accessories for the
Festo product.
Environment:
Information on environment−friendly use of Festo products.
Text markings
·The bullet indicates activities which may be carried out in
any order.
1. Figures denote activities which must be carried out in the
numerical order specified.
 Hyphens indicate general activities.