Fibridge F3-BX1204CCA User manual

F3 Series Mode Converter User Guide
F3 Series Mode Converter
Overview
F3 series Mode Converter is used to make exchange
among 850nm, 1310nm multimode optical port and 1310nm,
1550nm single mode optical port, supporting 155Mbps
-1250Mbps Optical port. The device is independent of protocol of the optical port.
F3 series module can be installed in our 16 slots chassis.
Features
◆ Used for connecting 155Mbps Optical port, independent of protocol
◆ Multi-mode transfer distance is up to 2KM
◆ Single mode maximum distance up to 100Km
◆ Working state is very clear with LED
◆ Internal power supply, including AC220V or DC-48V
◆ The power consumption is less than 3W
Specification
1、Optical port
1）Connectors: SC/ST/FC single mode or multimode
2）Single mode optical wavelength:1310nm and 1550nm
3）Multimode optical wavelength: 850nm and 1310nm
4）Compatible with the multimode fiber of 50/125, 62.5/125, 100/140μm
And single mode fiber of 8.3/125, 8.7/125, 9/125, 10/125μm
2、General
Work Temperature：0～50℃
Humidity：5%～90%(non-condensing)
Dimension：170mm(width)×134mm(deep)×40mm(high)
AC Power：160VAC～260VAC
- 1 -

F3 Series Mode Converter User Guide
3、LED Description:
LED Color Function Status Description
PWR1 Green 1 Module power ON Power supply OK
PWR2 Green 2 Module power ON Power supply OK
FX-LINK1 Green
Optical port 1
connecting
indication
ON Optical port 1 links OK
FX-LINK2 Green
Fiber port 2
connecting
indication
ON Optical port links OK
Installation:
SC/ST Fiber Network 1
TX
RX
RX
TX
F3 series
RX
TX
SC/ST Fiber Network 2
TX
RX
Order Information
F3-MX12CCA
Multimode 850 to Multimode 1310 mode converter, SC to SC, standalone, AC220 power
F3-BX1204CCA
Multimode 850 to Single mode 1310 mode converter, 40Km, SC to SC, standalone, AC220
power
F3-SX2304CCA
Single mode 1310 to single mode 1550 mode converter, 40Km, SC to SC, standalone,
AC220 power
X=7 means 155Mbps optical port
X=8 means 622Mbps optical port
X=9 means 1250Mbps optical port
- 2 -