Fisher & Paykel RB2470BRV1 User manual

Before Installation
• Ensure your product is not exposed to any heat generating products eg cooktop, oven or
dishwasher.
• The product must be installed by a qualified installer, or Fisher & Paykel trained and supported
service technician to avoid faulty electrical connection.
• All connections for electrical power and grounding must comply with local codes and ordinances
and be made by licensed personnel when required.
• Avoid installation of the product/s under a ground fault circuit interrupter (GFCI).
• Ensure the product is installed properly. Improper installation that results in product failure is not
covered under the product warranty.
Check the Installation Location
Cabinetry
• Check the dimensions of the cabinetry (width, depth, height, floor level, finished alcove returns).
• Ensure that the ventilation openings in the cabinetry are clear of obstruction.
Power Supply Connection
• Ensure that there is a separate power outlet for the product.
• Avoid sharing the power point with other products to prevent the product from accidentally switching off.
• For power requirements, refer to the information on the serial plate.
• Ensure your product is properly grounded (earthed).
• Connect your product to an electrical supply with the fitted plug and lead.
• We recommend to use an isolating switch that is easily accessible to the user after the product is installed.
https://producthelp.fisherpaykel.com/us/Cool/Integrated_Refrigeration/Bottom_Freezer/Non_Ice_and_Water/RB2470BRV1/In…
Updated: Sat, 06 May 2023 10:38:59 GMT
Powered by
1

Your Product
• Ensure that your product is the correct model as per your order.
• Ensure that the packaging is not damaged upon delivery.
• Check that the components and install kits are complete.
https://producthelp.fisherpaykel.com/us/Cool/Integrated_Refrigeration/Bottom_Freezer/Non_Ice_and_Water/RB2470BRV1/In…
Updated: Sat, 06 May 2023 10:38:59 GMT
Powered by
2