FitTrack FL-TF-30-01 User manual

FabLite Tension Fabric FL-TF-30-01
FL-TF-30-01
FabLite 30ft displays have unique stylistic features and shapes, are portable
and easy to assemble. The aluminum tube frame features snap-buttons and/
or spigot connections and zipper pillowcase fabric graphics. All displays come
in portable, wheeled transit cases. Simply pull the pillowcase fabric graphic(s)
over the frame and zip.
features and benefits:
Packing case(s):
2 OCE Cases
Shipping dimensions:
OCE: Expandable case length (l) may vary
40” - 66”l x 18”h x 18”d
1016mm-1677mm(l) x 458mm(h) x 458mm(d)
Approximate total shipping weight
(includes cases & graphics):
183 lbs / 83 kgs
Shipping
dimensions:
Hardware
- Premium aluminum tube frames with snap
button assembly
- Straight shaped frame
- Easy to store and ship
- Quick to set up
- Weighted feet for added stability
- Zipper pillowcase fabric graphic
- Lifetime limited hardware warranty against
manufacturer defects
Assembled unit:
352.82”w x 91.97”h x 25.59”d
8962mm(w) x 2336mm(h) x 650mm(d)
Approximate weight with cases:
152 lbs / 68.9 kgs

HEX KEY SET x1 TC-30-90T x2
Tools, Components, & Connectors
PLT-BP-LN114-S2-650 x3 LN114-SCRW x3
Included In Your Kit
Graphics
FL-DS-30-01-G x1

Included In Your Kit
Tubes
WS10-T1 x12
WS10-T7 x2
WS10-T4 x3
WV20-01-T2 x2
WS10-T2 x18
WV20-01-T1 x2
WS10-T5 x3
WV20-01-T7 x2
WS10-T6 x2
WS10-T4-B x1

Exploded View
FL-TF-30-01
FRAME A

Labeling Diagram
FL-TF-30-01
FRAME A

Connection Methods
Connection Method 1:
ES30 / ES50 / ES75
Connection Method 4:
Tube Clamps
Connection Method 2:
Snap Buttons & Swage
Connection Method 3:
ES30-90B / ES30-I / ES30-C
Compress the unlocked connector and slide one tube onto each end.
Lock both screws carefully using your hex key tool. Be sure to lock
securely, but do not overtighten.
Be sure to fully assemble all frames before using clamps. With the clamp unlocked, place one tube of the
first frame into the mouth of the clamp. Place the second tube (if applicable) into the second mouth of the
clamp. With both frame’s tubes in the clamp, be sure to lock securely, but do not overtighten.
Locate the snap button on the connector or swage tube. Locate the
hole on the corresponding tube. Press the snap button with your thumb
and slide the tube and connector together so that the snap button
snaps fully into the lock hole. To disassemble, press the snap button and
pull apart.
Compress one unlocked end of the connector and slide it through
one tube end. Compress the other end of the connector and slide the
second tube on. Lock both screws carefully using your hex key tool. Be
sure to lock securely, but do not overtighten.
Swage Snap Buttons
TCP TC TCH
ES30-90B ES30-90B

Kit Assembly
Step by Step:
Assemble Frame A according to
the Labeling Diagram.
Please reference Connection
Method 2 for more details.
Step 1. Step 2.
Apply FL-DS-30-01-G graphic to
the frame by pulling the
pillowcase over the top.
Zipper located to the bottom of
the Graphic.
FMLT-DS-30-01-G x1
bottom of frame
Apply the PLT-BP-LN114-S2-650
to the Left, Right, and center of
Frame A using your hex key tool.
See image right.
Step 3.
PLT-BP-LN114-S2-650
LN114-SCRW