Flanders Scientific Inc. AM Series Use and care manual

AM Series Monitor Firmware Update Instructions
20150602
Flanders Scientic, Inc.
6215 Shiloh Crossing
Suite G
Alpharetta, GA 30005
Phone: [phone]
Fax: [phone]
E-Mail: Support@FlandersScientic.com
www.FlandersScientic.com

AM Series Monitor Firmware Update Instructions
© 2012 Flanders Scientic, Inc.
2
Check your monitor model and current rmware
version in the monitor’s System Status menu.
Download new rmware from:
FlandersScientic.com/index/rmware.php
Verify UDisk mode is turned ON in the monitor’s
System menu. If OFF, turn UDisk mode ON.
Connect the provided Firmware Update Cable to
the monitor’s GPI port and your computer’s USB.
The monitor will appear in Mac’s Finder or PC’s My
Computer as mass storage.
Copy / Paste or Drag and Drop the downloaded
Firmware le to the monitor.
1
2
3
4
5
6

AM Series Monitor Firmware Update Instructions
© 2012 Flanders Scientic, Inc.
3
Select Update Firmware from the monitor’s
Display Alignment menu.
Reboot the monitor when prompted after
the update has succeeded.
7
8
Conrm Yes when prompted to update.
9