FLIR Raymarine CPT-S Transom User manual

INSTALLATION
INSTRUCTIONS
CPT-S Transom
© 2016 Raymarine UK Limited
87263-1Document number:
02-2016Date:
English (EN)

Trademarkandpatentsnotice
Raymarine,Tacktick,ClearPulse,Truzoom,HSB,SeaTalk,SeaTalkhs,SeaTalkng,Micronet,Raytech,
GearUp,MarineShield,Seahawk,Autohelm,Automagic,andVisionalityareregisteredorclaimed
trademarksofRaymarineBelgium.
FLIR,DownVision,SideVision,Dragony,Quantum,Instalert,InfraredEverywhere,andTheWorld’s
SixthSenseareregisteredorclaimedtrademarksofFLIRSystems,Inc.
Allothertrademarks,tradenames,orcompanynamesreferencedhereinareusedforidenticationonly
andarethepropertyoftheirrespectiveowners.
Thisproductisprotectedbypatents,designpatents,patentspending,ordesignpatentspending.
FairUseStatement
Youmayprintnomorethanthreecopiesofthismanualforyourownuse.Youmaynotmakeanyfurther
copiesordistributeorusethemanualinanyotherwayincludingwithoutlimitationexploitingthemanual
commerciallyorgivingorsellingcopiestothirdparties.
Softwareupdates
Important:ChecktheRaymarinewebsiteforthelatestsoftwarereleasesforyourproduct.
www.raymarine.com/software
Producthandbooks
ThelatestversionsofallEnglishandtranslatedhandbooksareavailabletodownloadinPDFformatfromthewebsite
www.raymarine.com.
Pleasecheckthewebsitetoensureyouhavethelatesthandbooks.
Copyright©2016RaymarineUKLtd.Allrightsreserved.
ENGLISH
Documentnumber:87263-1
Date:02-2016

Contents
Chapter1Importantinformation........................7
CertiedInstallation...................................................7
Transducercareandcleaning.....................................7
Wateringress............................................................7
Disclaimer.................................................................8
Declarationofconformity............................................8
Warrantyregistration..................................................8
Productdisposal........................................................8
IMOandSOLAS........................................................8
Technicalaccuracy....................................................8
Chapter2Documentandproduct
information...........................................................9
2.1Documentinformation..........................................10
2.2CHIRPSonaroverview.........................................11
Chapter3Planningtheinstallation...................13
3.1Installationchecklist.............................................14
3.2Partssupplied–CPT-S........................................14
3.3Requiredadditionalcomponents...........................15
3.4T oolsrequired......................................................15
3.5Warningsandcautions.........................................16
3.6Selectingalocationforthetransducer...................16
Chapter4Cablesandconnections....................19
4.1Generalcablingguidance.....................................20
4.2Cablerouting.......................................................20
4.3Connectionsoverview..........................................21
Chapter5Mounting.............................................23
5.1Pre-installationtest...............................................24
5.2Mountingthetransommountbracket.....................24
5.3Mountingthetransducer.......................................25
5.4T estingandadjustingthetransducer.....................25
5.5Finalizingthetransducermounting........................26
5.6Removingthetransducer......................................26
Chapter6Systemchecksand
troubleshooting...................................................27
6.1Troubleshooting...................................................28
Chapter7Maintenance.......................................31
7.1Routinechecks....................................................32
7.2Unitcleaninginstructions......................................32
Chapter8Technicalsupport..............................33
8.1Raymarineproductsupportandservicing..............34
8.2Viewingproductinformation..................................35
Chapter9Technicalspecication......................37
9.1T echnicalspecication..........................................38
Chapter10Sparesandaccessories..................39
10.1Sparesandaccessories—CPT-S
Transom...................................................................40
5

6CPT-STransomCHIRPsonartransducer

Chapter1:Importantinformation
CertiedInstallation
Raymarinerecommendscertiedinstallationbya
Raymarineapprovedinstaller.Acertiedinstallation
qualiesforenhancedproductwarrantybenets.
ContactyourRaymarinedealerforfurtherdetails,
andrefertotheseparatewarrantydocumentpacked
withyourproduct.
Warning:Productinstallationand
operation
•Thisproductmustbeinstalledand
operatedinaccordancewiththe
instructionsprovided.Failuretodoso
couldresultinpersonalinjury,damage
toyourvesseland/orpoorproduct
performance.
•Raymarinerecommendscertied
installationbyaRaymarineapproved
installer.Acertiedinstallationqualies
forenhancedproductwarrantybenets.
ContactyourRaymarinedealerfor
furtherdetails,andrefertotheseparate
warrantydocumentpackedwithyour
product.
Warning:Highvoltages
Thisproductmaycontainhighvoltages.
DoNOTremoveanycoversorotherwise
attempttoaccessinternalcomponents,
unlessspecicallyinstructedinthe
documentationprovided.
Warning:Positivegroundsystems
Donotconnectthisunittoasystemwhich
haspositivegrounding.
Warning:Switchoffpowersupply
Ensurethevessel’spowersupplyis
switchedOFFbeforestartingtoinstallthis
product.DoNOTconnectordisconnect
equipmentwiththepowerswitchedon,
unlessinstructedinthisdocument.
Warning:Transduceroperation
Onlytestandoperatethetransducerin
thewater.DoNOToperateoutofwater
asoverheatingmayoccur.
Caution:Donotcuttransducer
cables
•Cuttingthetransducercableseverely
reducessonarperformance.Ifthe
cableiscut,itmustbereplaced,it
cannotberepaired.
•Cuttingthetransducercablewill
voidthewarrantyandinvalidatethe
EuropeanCEmark.
Transducercareandcleaning
Growthcancollectonthebottomofthetransducer,
thiscanreduceperformance.T opreventthebuild-up
ofseagrowth,coatthetransducerwithathinlayer
ofwater-basedantifoulingpaint,availablefrom
yourlocalmarinedealer.Reapplypaintevery6
monthsoratthebeginningofeachboatingseason.
Certainsmarttransducershaverestrictionsonwhere
antifoulingpaintisapplied.Pleaseconsultyour
dealer.
Note:Transducerswithatemperaturesensormay
notworkproperlyifpainted.
Note:Neveruseketone-basedpaint.Ketones
canattackmanyplastics,possiblydamagingthe
sensor.
Note:Neverusespraypaintonyourtransducer.
Sprayingincorporatestinyairbubbles,anda
marinetransducercannottransmitproperly
throughair.
Useasoftclothandmildhouseholddetergentto
cleanthetransducer.Ifthefoulingissevere,remove
thegrowthwithatoughcleaningpad,suchasa
greenScotchBriteTMpadforexample.Becarefulto
avoidscratchingthefaceofthetransducer.
Note:Harshcleaningsolventssuchasacetone
WILLdamagethetransducer.
Caution:Serviceandmaintenance
Thisproductcontainsnouserserviceable
components.Pleasereferallmaintenance
andrepairtoauthorizedRaymarine
dealers.Unauthorizedrepairmayaffect
yourwarranty.
Wateringress
Wateringressdisclaimer
Thewaterproofratingcapacityofthisproductmeets
thestatedIPXstandardreferredtointheproduct’s
TechnicalSpecication.
Importantinformation7

Disclaimer
Raymarinedoesnotwarrantthatthisproductis
error-freeorthatitiscompatiblewithproducts
manufacturedbyanypersonorentityotherthan
Raymarine.
Raymarineisnotresponsiblefordamagesorinjuries
causedbyyouruseorinabilitytousetheproduct,
bytheinteractionoftheproductwithproducts
manufacturedbyothers,orbyerrorsininformation
utilizedbytheproductsuppliedbythirdparties.
Declarationofconformity
RaymarineUKLtd.declaresthatthisproductis
compliantwiththeessentialrequirementsofEMC
directive2004/108/EC.
TheoriginalDeclarationofConformitycerticate
maybeviewedontherelevantproductpageat
www.raymarine.com.
Warrantyregistration
ToregisteryourRaymarineproductownership,
pleasevisitwww.raymarine.comandregisteronline.
Itisimportantthatyouregisteryourproductto
receivefullwarrantybenets.Yourunitpackage
includesabarcodelabelindicatingtheserialnumber
oftheunit.Youwillneedthisserialnumberwhen
registeringyourproductonline.Youshouldretain
thelabelforfuturereference.
Productdisposal
Disposeofthisproductinaccordancewiththe
WEEEDirective.
TheWasteElectricalandElectronicEquipment
(WEEE)Directiverequirestherecyclingofwaste
electricalandelectronicequipment.
IMOandSOLAS
Theequipmentdescribedwithinthisdocument
isintendedforuseonleisuremarineboatsand
workboatsNOTcoveredbyInternationalMaritime
Organization(IMO)andSafetyofLifeatSea
(SOLAS)CarriageRegulations.
Technicalaccuracy
Tothebestofourknowledge,theinformationinthis
documentwascorrectatthetimeitwasproduced.
However,Raymarinecannotacceptliabilityforany
inaccuraciesoromissionsitmaycontain.Inaddition,
ourpolicyofcontinuousproductimprovementmay
changespecicationswithoutnotice.Asaresult,
Raymarinecannotacceptliabilityforanydifferences
betweentheproductandthisdocument.Please
checktheRaymarinewebsite(www.raymarine.com)
toensureyouhavethemostup-to-dateversion(s)of
thedocumentationforyourproduct.
8CPT-STransomCHIRPsonartransducer

Chapter2:Documentandproductinformation
Chaptercontents
•2.1Documentinformationonpage10
•2.2CHIRPSonaroverviewonpage11
Documentandproductinformation9

2.1Documentinformation
Thisdocumentcontainsimportantinformation
relatedtotheinstallationofyourRaymarineproduct.
Thedocumentincludesinformationtohelpyou:
•planyourinstallationandensureyouhaveallthe
necessaryequipment;
•installandconnectyourproductaspartofawider
systemofconnectedmarineelectronics;
•troubleshootproblemsandobtaintechnical
supportifrequired.
ThisandotherRaymarineproductdocuments
areavailabletodownloadinPDFformatfrom
www.raymarine.com.
CPT-STransomtransducer
D13507-1
Part
numberDescription
Construc-
tion
E70342CPT-S—TransomCHIRPsonar
transducer
Plastic
•TheCPT-SisaCHIRP ,conicalbeamsonar
transducer
•Thetransducercanbeconnectedto
DownVision™sonarmodulesorDownVision™
variantMFDsrunningLightHouseIIVersion
16software,offeringsonaronlyfunctionalityto
DownVision™products.
Documentillustrations
Yourproductmaydifferslightlyfromthatshown
intheillustrationsinthisdocument,dependingon
productvariantanddateofmanufacture.
Allimagesareprovidedforillustrationpurposesonly.
Productdocumentation
Thefollowingdocumentationisapplicabletoyour
product:
DescriptionPartnumber
CPT–StransducerInstallationinstructions
InstallationofaCPT–Stransducerand
connectiontoasonarmodule/display.
87263/
88059
LightHouseMFDoperationinstructions
DetailstheoperationoftheFishnder
applicationforLightHouse™powered
DownVision™variantmultifunctiondisplays.
81360
Operationinstructions
Fordetailedoperationinstructionsforyourproduct,
refertothedocumentationthataccompaniesyour
display.
Sonarmoduleinstallationinstructions
Thisdocumentincludesinstallationinstructionsfor
thetransduceronly.Forinstallationinstructions
forconnectingasonarmodule,pleaserefertothe
documentationthataccompaniesthesonarmodule.
10CPT-STransomCHIRPsonartransducer

2.2CHIRPSonaroverview
CHIRPsonarproducesaconicalshapedbeam,the
coverageoftheconicalbeamisthewatercolumn
directlybeneaththevessel
Conicalbeam
D12784-2
Sonariseffectiveatarangeofspeeds.Indeeper
waterstheCHIRPbandwidthisautomatically
optimizedtoimprovebottomlockandthedetection
ofmovingobjects(e.g.sh)inthewiderwater
column.
CHIRPsonarscreenexample
Documentandproductinformation11

12CPT-STransomCHIRPsonartransducer

Chapter3:Planningtheinstallation
Chaptercontents
•3.1Installationchecklistonpage14
•3.2Partssupplied–CPT-Sonpage14
•3.3Requiredadditionalcomponentsonpage15
•3.4Toolsrequiredonpage15
•3.5Warningsandcautionsonpage16
•3.6Selectingalocationforthetransduceronpage16
Planningtheinstallation13

3.1Installationchecklist
Installationincludesthefollowingactivities:
InstallationTask
1Planyoursystem.
2Obtainallrequiredequipmentandtools.
3Siteallequipment.
4Routeallcables.
5Drillcableandmountingholes.
6Makeallconnectionsintoequipment.
7Secureallequipmentinplace.
8Poweronandtestthesystem.
Schematicdiagram
Aschematicdiagramisanessentialpartofplanning
anyinstallation.Itisalsousefulforanyfuture
additionsormaintenanceofthesystem.The
diagramshouldinclude:
•Locationofallcomponents.
•Connectors,cabletypes,routesandlengths.
3.2Partssupplied–CPT-S
D13460-1
23
9
10
x3
41 5678
1.Transducer
2.Ratchetarm
3.Mountingbracket
4.M5Hexratchetbolt
5.Ratchetplate
6.Compressionwasher
7.M5washer
8.M5lockingnut
9.3xSelftappingscrews
10.Documentation
14CPT-STransomCHIRPsonartransducer

3.3Requiredadditionalcomponents
Thisproductformspartofasystemofelectronics
andrequiresthefollowingadditionalcomponentsfor
fulloperation.
•CompatibleDownVision™SonarModuleor
DownVision™variantMFD.RefertoCompatible
products,foralistofcompatibleproducts.
•Transducerextensioncables.RefertoChapter10
Sparesandaccessories,forsuitablecables.
Compatibleproducts
Thetransducercanbeconnecteddirectlytothe
followingDownVision™sonarmodulesanddisplays.
DescriptionPartnumber
CP100E70204
a68/a68Wi-FiE70206/E70207
a78/a78Wi-FiE70208/E70209
a98E70234
a128E70237
eS78E70265
eS98E70275
eS128E70285
3.4Toolsrequired
Thefollowingtoolsarerequiredtoinstallthe
transducer.
D12785-1
1
4
6
2
3
5
7
1.Powerdrill
2.Pozidrivescrewdriver
3.4mmHexwrench(Allenkey)
4.Marinegradesealant(non-acetatebased)
5.Suitablesizeddrillbit
6.Adhesivetape
7.24mm(15/16”)Holesaw(onlyrequiredifyou
areroutingthecablethroughabulkhead.)
Warning:Marine-gradesealant
Onlyusenon-acetatebasedmarine-grade
sealants.Usinganacetatebasedsealant
cancausedamagetoplasticparts.
Planningtheinstallation15

3.5Warningsandcautions
Important:Beforeproceeding,ensurethatyou
havereadandunderstoodthewarningsand
cautionsprovidedintheChapter1Important
informationsectionofthisdocument.
3.6Selectingalocationforthe
transducer
Theguidelinesbelowshouldbefollowedwhen
selectingalocationforthetransducer.
Note:Thetransducerisnotsuitableformounting
onvesselswherethetransomisaftofthe
propeller(s).
Forbestperformancethetransducermustbe
installedinalocationwiththeleastturbulenceand
aeration.Themosteffectivewaytodeterminethis
isbycheckingthewaterowaroundthetransom
whilstunderway.
•Mountclosetothekeel(centerline),inaposition
wherethetransducerelementwillbefully
submergedwhenthevesselisplaningandturning.
•Mountasuitabledistancefromthepropeller(s)to
avoidwake.
•Mountinalocationwherenoloadwillbeapplied
tothetransducerduringlaunching,lifting,trailering
andstorageoftheboat.
D13184-1
•Forclockwiserotatingpropellers,mount
thetransduceronthestarboardside,for
counter-clockwise,mountontheportside.
•Onatwinenginevesselmountthetransducer
betweentheengines.
•Turbulencecanbecausedbyanumberofother
factorssuchassteps(1),ribs(2),rowsofrivets
(3)andstrakes(4).Theturbulenceappearsaft
oftheselocations.
1
24
3
D12636-2
•Airtrappedunderthefrontofthevesselcantravel
underthehullandappearasaerationaft.
•Ifinstallingonthestepofasteppedtransom,
allowsufcientroomabovethetransducerfor
transducerkickup.
16CPT-STransomCHIRPsonartransducer

D13461-1
Note:Optimumtransducerlocationwill
varydependingonvesseltype.Optimum
transducerheightandangleshouldbe
obtainedbytestingthetransducerwiththe
vesselinthewater.
Transducerdimensions—CPT-S
65.5 mm (2.58 in)
86 mm (3.39 in)
111.6 mm (4.39 in)
D13466-1
•CPT-Scablelength:10m(32.8ft).
Planningtheinstallation17

18CPT-STransomCHIRPsonartransducer

Chapter4:Cablesandconnections
Chaptercontents
•4.1Generalcablingguidanceonpage20
•4.2Cableroutingonpage20
•4.3Connectionsoverviewonpage21
Cablesandconnections19

4.1Generalcablingguidance
Cabletypesandlength
Itisimportanttousecablesoftheappropriatetype
andlength
•Unlessotherwisestateduseonlystandardcables
ofthecorrecttype,suppliedbyRaymarine.
•Ensurethatanynon-Raymarinecablesareofthe
correctqualityandgauge.Forexample,longer
powercablerunsmayrequirelargerwiregauges
tominimizevoltagedropalongtherun.
Routingcables
Cablesmustberoutedcorrectly,tomaximize
performanceandprolongcablelife.
•DoNOTbendcablesexcessively.Wherever
possible,ensureaminimumbenddiameterof200
mm(8in)/minimumbendradiusof100mm(4in).
100 mm (4 in)
200 mm (8 in)
•Protectallcablesfromphysicaldamageand
exposuretoheat.Usetrunkingorconduitwhere
possible.DoNOTruncablesthroughbilgesor
doorways,orclosetomovingorhotobjects.
•Securecablesinplaceusingtie-wrapsorlacing
twine.Coilanyextracableandtieitoutoftheway.
•Whereacablepassesthroughanexposed
bulkheadordeckhead,useasuitablewatertight
feed-through.
•DoNOTruncablesneartoenginesoruorescent
lights.
Alwaysroutedatacablesasfarawayaspossible
from:
•otherequipmentandcables,
•highcurrentcarryingACandDCpowerlines,
•antennae.
Strainrelief
Ensureadequatestrainreliefisprovided.Protect
connectorsfromstrainandensuretheywillnotpull
outunderextremeseaconditions.
Cableshielding
Ensurethatalldatacablesareproperlyshielded
thatthecableshieldingisintact(e.g.hasn’tbeen
scrapedoffbybeingsqueezedthroughatightarea).
4.2Cablerouting
Cableroutingrequirementsforthetransducercable.
Important:T oavoidinterference,thecablemust
beroutedasfarawayfromVHFradioantenna
cablesaspossible.
•Checkthatthecableislongenoughtoreachthe
equipmentitwillbeconnectedto.Anoptional4m
(13.1ft)extensioncableisavailableifrequired.
•Ensurethereisenoughslackinthetransducer
cable,atthetransducerend,toallowthe
transducertopivotupanddown.
•Securethecableatregularintervalsusingcable
clips(notsupplied).
•Anyexcesscableshouldbecoiledupata
convenientlocation.
20CPT-STransomCHIRPsonartransducer