Fluance SM10 User manual

Steel Safety Cable
Speaker Rotation
Adjustment
Compression Joint
Adjustment
Wire Hole
Wall Mount
Rotation Adjustment
Wall Mount Bracket
Speaker Mount
Bracket
Included Hardware
Metal Speaker Mounts with 33 lb Capacity Installation Guide
Recommended Tools
• Pencil
• Philips Screwdriver
• Power Drill
• 1/4" Drill Bit
• 1/6" Allen Key
1. Install the speaker mount bracket onto the
speaker using washers and screws. Be careful
to not overtighten the screws.
Note: Installing screws into your speaker may void
manufacturer warranty. Consult with your speaker
manufacturer for more information.
2. Use the compression joint adjustment to
orient the speaker in the desired direction.
Ensure it is tightened once positioned correctly.
3. Use the speaker rotation adjustment
to tilt the speaker to the desired position.
Speaker Mount
Bracket
Washer
Screw
Rotation
Adjustment
6x
4x
2x
4x

4. Use the wall mount rotation adjustment to
rotate the speaker mount to the desired
position.
5. Place Bracket in desired position. Use pencil
to mark the holes on the Wall Mount Bracket.
Note: It is recommended to install on a wall stud which can
be located using a stud finder.
6. If installing in concrete or drywall,
drill holes to match the size of the
included mounting hardware.
7. Place Wall Bracket in place and use washers and
screws to secure. If installing in concrete or drywall,
insert anchors into predrilled holes before securing.
8. Once the speaker is mounted, install the steel
safety cable through both safety cable holes.
9. When connecting the speaker wire
feed it through the wire hole for easy
wire management.
Wall Mount
Rotation Adjustment
Allen Key
Anchor
Washer
Screw