Flyfilms Flowline Series User manual

All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any
form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied
by the applicable copyright statutes or in wring by the Publisher.
Flowline 850N Stabilizing Camera
Support with Placid Arm
(FF-FLN-850N-PLA)

Flylms Flowline 850N Stabilizing Camera Support with Placid Arm 2
INTRODUCTION
With the marvelous success of Flylms Flowline series, Flylms feels proud to introduce a
Flowline 850N Stabilizing Camera Support with Placid Arm for an unforgeable lming
experience. Ergonomically designed owline ensures comfort by reducing the stac load on the
neck and shoulder muscles, distribung it to other parts of the body. Flylms Placid, a two axis
spring arm ensures stability and smoothness by controlling the vibraons. It works great with the
gimbal rigs like Free y Mövi or most other gimbal rigs.
WHAT’S IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is
pictured and listed below.

Flylms Flowline 850N Stabilizing Camera Support with Placid Arm 3
SPECIFICATION
Product Name
Load Capacity
Top Bar Length
Height Mounted
Folded
Suspension line length
Flowline-X 850N
2-17kg/4.4-37.4lb
112 cm (44'')
60 cm (23.6'')
107 cm (42'')
560mm
Vest Adjustment 30'' to 52''
Product Weight 5.9Kg/13 lbs
ASSEMBLING OF YOUR FLYCAM FLOWLINE CAMERA SUPPORT
 Join secon 1 of support bar to secon 2 with simple push-t technique.

Flylms Flowline 850N Stabilizing Camera Support with Placid Arm 4
 By adjusng side support, you will
move the weight on your hips.
 Wear support jacket and ghten the buckles provided at the waist and at the chest and
adjust as per your convenience.
 Loosen the knob of Hook and aach the camera to it. Tighten with provided knob to ensure
slip free connecon.
Note: Leave a gap of approx. 2cm (1 inch) between the camera and the support arm

Flylms Flowline 850N Stabilizing Camera Support with Placid Arm 5
NOTE: Loosen the four knobs provided on
the back of support jacket for height
adjustment of support bar.
ASSEMBLING OF YOUR FLOWLINE PLACID
 Loosen the bolts at back of the jacket as shown below.
 Then remove the upper part carefully.

Flylms Flowline 850N Stabilizing Camera Support with Placid Arm 6
 Then remove the spring of the Hook .
 Now loose the knot of rope with the help of knob at the back in order to loose the rope from
hook as shown in picture
 Now loosen the knot of rope in order
to remove the rope from hook.

Flylms Flowline 850N Stabilizing Camera Support with Placid Arm 7
 Now Loose the Allen bolt of Placid
Arm with the help of Allen Key.
 Aach the extension arm of Flowline by loosing the knob , then Re-aach the arm and ght
the knob properly .
 Now pass the rope through Placid
adapter as shown in the image. Mount
the Placid on Flowline arm and ghten
the Allen bolt with help of Allen key.

Flylms Flowline 850N Stabilizing Camera Support with Placid Arm 8
 Then insert the rope into Hook and e the knot of Rope properly.
 Align the rope with the help of pulley of Placid Arm.
 Secure the Placid on Flowline Arm with
provided e to ensure slip free
connecon.

Flylms Flowline 850N Stabilizing Camera Support with Placid Arm 9
 Then aach the back part of the jacket
and ghten the bolts properly.
 Now adjust the hook with Placid Arm
As shown in picture.
 Now mount your camera setup with the help of hook of Flowline and ghten the knob to
secure it properly.

Flylms Flowline 850N Stabilizing Camera Support with Placid Arm 10
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import
dues are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
best to help you out.
For any other assistance you can reach us via email.
YOUR FLYCAM FLOWLINE 850N STABILIZING CAMERA SUPPORT WITH PLACID
ARM ALL DRESSED UP AND READY TO GO
(SHOWN WITH OPTIONAL (ACCESSORIES)