FOREVER Eclectic Scout F35901 User manual

297 mm
210 mm
1
SINCE 1954
TM
This page is for printing and document
formatting specifications only.
THIS PAGE DOES NOT PRINT
DO NOT scale the artwork for printing. Each page
has been scaled for proper scaling of parts.
Page 1 will be the cover page and first page printed
after this specification page. Any blank pages needed will
be placed at the end of the booklet.
Printer to arrange booklet pages in proper
sequence according to page number.
Revisions:
A. initial release. 6/8/2020

1
AB20397A
ASSEMBLY ASSISTANCE
IMPORTANT: Retain for future reference and read
carefully.
Foundations strives for the highest quality in our
products but occasionally a missing part or problem
can occur during assembly.
If any parts are missing or broken or you need
assistance with assembly, DO NOT return the
product to your dealer. Go to our website at
www.foundations.com or call Foundations
for assistance at 1-877-716-2757 (U.S. Only) or
1-330-722-5033 (Monday through Friday, 9:00 a.m.–
4:00 p.m. Eastern Time). Please have the model
number and manufacture date available when you
call or write us at:
Foundations, 5216 Portside Dr., Medina, OH 44256
KEEP INSTRUCTIONS
FOR FUTURE USE .
FOR CUSTOMER SERVICE CALL
1-877-716-2757
(outside of U.S. 330-722-5033). DO NOT CALL
RETAILER OR RESELLER FOR SERVICE
AS THEY ARE NOT AUTHORIZED TO
RESOLVE ANY SERVICE ISSUES.
FOR WARRANTY AND FEDERAL SAFETY STANDARD
COMPLIANCE CERTIFICATES, PLEASE VISIT OUR
WEBSITE AT
www.forever-eclectic.com
Record the information for your product here:
Model number:
Manufacture date:
PO number:
• Adult assembly required.
• Read all instructions BEFORE assembly and USE
of product.
• Unpack carton, remove packing materials,
including polybag. Identify and check all parts.
ASSEMBLY INSTRUCTIONS
THIS IS THE ASSEMBLY
INSTRUCTIONS FOR CRIBS SOLD IN CANADA
INSTRUCTIONS D’ASSEMBLAGE POUR LES
LITS DE BÉBÉ VENDUS AU CANADA
Foundations Worldwide, Inc.
5216 Portside Dr.
Medina, OH 44256 USA
PH: 1 330.722.5033
FAX: [phone]
www.forever-eclectic.com
Scout Full Size 4 in 1 Crib
Model Covered: F35901
Assembled as Crib Assembled as Toddler Bed
AB20396_G2
AB20396_G1

2
Part Description Part Number QTY
J. Spring 11201183 1
K.Top Rail 22303574 1
L. End Rail - Right 22303576 1
M. End Rail - Left 22303575 1
N. Bottom Rail 22303643 1
P. Upper Back Panel 22303577 1
Q. Lower Panel 22303642 1
R. End Cap 22303512 2
S. Top Front Cap Rail 22303511 1
Crib Parts
PARTS LIST CRIB PARTS
Part Description Part Number QTY
A. Top Back Cap Rail 22303604 1
B. Back Post - Right 22303595 1
C. Front Post - Right 22303599 1
D. Back Post - Left 22303597 1
E. Front Post - Left 22303601 1
F. Front Assembly 22303579 1
G. Stretcher 22303580 1
H. Short Head Assembly 22303509 1
I. Short Foot Assembly 22303495 1
A
B
C
D
E
F
G
HI
J
K
LM
N
P
Q
R
AB20396_G3
S

3
Part Description Part Number QTY
AA. Dowel Pin
8mmx 30mm
11200969 10
BB. Allen Head Bolt
6mm x 45mm
11200974 22
CC. Allen Head Bolt
6mm x 80mm
11200971 8
DD. Allen Head Bolt
6mm x 55mm
11200984 6
EE. Joint Connector Nut 11200970 16
FF. Allen Wrench 11200978 2
GG. Connector Nut 11201001 4
Hardware Package
PREPARATION
Carefully remove and lay out all hardware and parts. Check quantities and match the parts list. Construct
Crib on an even flat floor. Note: during the assembly process whenever using screws or bolts, check each
with the parts list by letter and size identification. Place each screw or bolt on the diagram of the item
which is sketched actual size. Be sure to use the proper size specified in the assembly directions. If any
parts are missing or broken or you need assistance with assembly DO NOT return your product to the
dealer. Please identify the crib by the model number identification stamped on the inside face of the Short
Head Assembly and Short Foot Assembly when you call or write to Foundations. Make note of all
identification numbers and include this information with your request.The Allen Head Bolts (HH and II)
have a friction enhancing patch on the thread which may cause resistance during tightening.
DO NOT Substitute Parts!
#2 Medium Straight Screwdriver
PARTS LIST HARDWARE
SUGGESTED TOOLS
Part Description Part Number QTY
HH. Allen Head Bolt
6mm x 12mm
11201000 4
II. Allen Head Bolt
6mm x 17mm
11200976 8
JJ. Steel Pin 11201002 1
KK. Allen Head Bolt
6mm x 70mm
11200997 6
LL. Allen Head Bolt
6mm x 90mm
11201061 2
MM. Dowel Pin
10mm x 40mm
11200995 2
AA BB CC
DD EE FF GG
HH II JJ KK
LL
MM
AB20396_G4

4
STEP 1
STEP 2
L
EE
MM
LL
K
M
K x 1
L x 1
M x 1
EE x 2
LL x 2
MM x 2
AB20396_G5
MM
LL
EE
A
P
AA
AA
BB x 4
A x 1
P x 1
AA x 2
BB x 4
AB20396_G6

5
STEP 3
STEP 4
Q
KK x 2
EE x 2
KK x 2
EE x 2
Q x 1
EE x 4
KK x 4
AB20396_G7
KK x 2
EE x 2
KK
KK
N
N x 1
KK x 2
AB20396_G7.5

6
STEP 5
STEP 6
B
CC
CC
CC
CC
EE
D
EE
EE
EE
B x 1
D x 1
CC x 4
EE x 4
AB20396_G8
GG x 2
HH x 2
GG x 2
HH x 2
GG x 4
HH x 4
AB20396_G8.5

7
STEP 8
STEP 7
E
JJ
EE
EE
CC
DD
CC
E x 1
G x 1
AA x 1
CC x 2
DD x 1
EE x 2
JJ x 1
AB20396_G10
AA
G
S
F
AA
AA
DD x 4
F x 1
S x 1
AA x 2
DD x 4
AB20396_G9

8
STEP 9
STEP 10
R
AA x 2
BB x 3
H x 1
I x 1
R x 2
AA x 4
BB x 6
HI
R
AA x 2
BB x 3
AB20396_G11
CCC
DD
EE
CC
EE
AA
C x 1
AA x 1
CC x 2
DD x 1
EE x 2
AB20396_G10.5

9
BB x 3
H / R
BB x 3
AB20396_G12
STEP 12
STEP 11
BB x 3
I / R
BB x 3
AB20396_G13

10
STEP 13
II x 2
II x 2
J
J x 1
II x 4
AB20396_G15
1
2
3
II
STEP 14
BB x 3
BB x 3
BB x 6
AB20396_G14

11
FINISHING TOUCHES
Place a purchased full sized mattress on the spring.
After completing the crib assembly, and after
making yourself aware of WARNINGS, CAUTIONS,
CLEANING,STORAGE, USE and MAINTENANCE of
crib on pages 13, 14 and 15, store the assembly
directions in the pouch which was pre-attached to
the spring. For future referral to assembly direc-
tions you will only need to remove them from the
pouch. We caution you not to store excess hardware
in pouch as this would be a danger to child if re-
trieved by him/her.
Note: Keep any parts and hardware not used in crib
assembly. These pieces may be needed for other
crib configurations. AB20396_G16

12
Assembly bolts come with guard rail kit available from your Child Craft dealer.
TODDLER BED / GUARD RAIL
TODDLER BED
AB20396_GTB
AB20396_GGR

13
WARNING
WARNING:INFANTS HAVE DIED IN TODDLER BEDS FROM
ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a small
child. NEVER use bed with children younger than 15 months. ALWAYS follow assembly
instructions.
WARNING:STRANGULATION HAZARD: NEVER place bed near windows where
cords from blinds or drapes may strangle a child. NEVER suspend strings over bed.
NEVER place items with a string, cord or ribbon, such as hood strings or pacifier cords,
around a child’s neck. These items may catch on bed parts.
CAUTION:ENTRAPMENT HAZARD: To avoid dangerous gaps, any
mattress used in this bed shall be a full-sized crib mattress at least 51 5/8 in. (1310 mm)
in length, 27 1/4 in. (690 mm) in width, and 4 in. (100 mm) in thickness.
• The users maximum weight shall not be greater than 50 lbs. (22.7 kg).
• Mattress MUST be moved into lowest position for proper positioning.
• This crib contains all components necessary to convert to a toddler bed. However,
a guardrail may be available for purchase to provide additional security. Contact
Foundations® for assistance. Refer to maintenance section for contact
information.
WARNING
WARNING
WARNING
WARNINGS (For Toddler Bed)
FULL SIZE BED CONFIGURATION
Guard Rail and Full Bed Options are complete kits that can be purchased separately
from your Child Craft dealer.
GG x 2
GG x 2
II x 2
II x 2
II x 2
II x 2
GG x 4
II x 8 *
II x 2
AB20396_GFB
* Use 4 of the II bolts from Spring attachment
for full bed assembly

14
MAINTENANCE, CLEANING, AND STORAGE
MAINTENANCE:
Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and
secure.
Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after
assembly and frequently during use.
DO NOT use crib if any parts are missing or broken.
If any parts are missing, broken or you need assistance DO NOT return crib to your dealer.
Call Foundations at 330.722.5033 and include model identification numbers recorded on page 1.
DO NOT substitute parts.
CLEANING:
Mix a mild solution of gentle dishwashing soap and water, apply to surface using a clean cloth lightly
dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a
soft dry cloth.
DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s skin,
scouring pads, steel wool or coarse rags. This crib should be treated the same as any fine furniture.
STORAGE:
When storing crib use caution as extreme temperature or humidity changes could be harmful.
Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away from any
wood furniture item.
After completing the assembly the user is advised to read and be aware of
ALL WARNINGS, CAUTIONS, CLEANING, STORAGE USE AND MAINTENANCE notices in these directions
and printed on the storage pouch on the crib spring. A printed pouch is attached to the crib spring for the
permanent storage of the assembly directions. Please place the complete set of
assembly directions into the pouch for future referral. We caution the user to not place excess hardware in
the pouches as it could present danger to the child if retrieved.
WARNING
• DO NOT use this crib if you cannot exactly follow the instructions that come
with it.
• DO NOT use this crib for a child who can climb out of it or who is taller than 90 cm.
• DO NOT place any cord, strap or similar item in or near this crib that could become
wrapped around a child’s neck.
• DO NOT place this crib near a window or patio door where a child could reach the
cord of a blind or curtain and be strangled.
• Check this crib regularly before using it and do not use it if any part is loose or
missing or if there are any signs of damage. Do Not substitute parts. Contact the
manufacturer if replacement parts or additional instructions are needed.
• Children can suffocate on soft bedding. Do Not place pillows, comforters or soft
mattresses in this crib.
• Use a crib mattress that is no thicker than 15 cm and is of such a size that,
when it is pushed firmly against any side of the crib, it does not leave a gap of
more than 3 cm between the mattress and any part of any other side of the crib.
5216 Portside Dr.
Medina,Ohio 44256 USA
Telephone: [phone]
Fax: [phone]
www.forever-eclectic.com
IMPORTED BY:
Foundations Worldwide Inc.
30 Casebridge Court Scarborough,
ON Canada M1B 3M5
330.722.5033

15
Assemblé en lit de Bébé Assemblé en lit Enfant
CONSERVEZ CES INSTRUCTIONS À
TITRE DE RÉFÉRENCE. THIS IS THE ASSEMBLY INSTRUCTIONS
FOR CRIBS SOLD IN CANADA
INSTRUCTIONS D’ASSEMBLAGE POUR
LES LITS DE BÉBÉ VENDUS AU CANADA
POUR LE SERVICE À LA CLIENTÈLE, APPELEZ LE
1-877-716-2757
(à l’extérieur des É-U, appelez le 1-330-722-5033).
N’APPELEZ PAS LE VENDEUR OU LE DISTRIBUTEUR POUR
LE SERVICE À LA CLIENTÈLE, CAR ILS NE SONT PAS AU-
TORISÉS À RÉSOUDRE CE
GENRE DE PROBLÈMES.
GARANTIE ET FÉDÉRAL DE SÉCURITÉ STANDARD
CERTIFICAT DE CONFORMITÉ Le,
S’IL VOUS PLAÎT VISITEZ NOTRE SITE INTERNET
www.forever-eclectic.com
Inscrivez les renseignements de votre produit
ici :
Numéro de modèle :
Date de fabrication :
No de commande :
GUIDE D’ASSEMBLAGE
IMPORTANT: conserver pour consultation
future - lire attentivement.
Foundations met tout en œuvre pour fabriquer des
produits de la plus haute qualité. Néanmoins, malgré
tous nos efforts, il arrive parfois qu’une pièce manque
ou qu’une difficulté se présente pendant l’assemblage.
Si une pièce est manquante ou brisée, ou si vous avez
besoin d’aide pour assembler le produit, NE retournez
PAS le produit au détaillant. Visitez notre site Web au
www.childcraftbaby.com ou demandez de l’aide à
Foundations en composant le 1-877-716-2757 (É.-U.
seulement) ou le 1-330-722-5033 (du lundi au vendredi,
de 9 h 00 à 16 h 00, heure de l’Est). Assurez-vous de
disposer du numéro de modèle et de la date de
fabrication du produit lorsque vous nous appelez ou
nous écrivez au :
Foundations, 5216 Portside Dr. Medina, OH. 44256
• L’assemblage doit être effectué par un adulte.
• Veuillez lire toutes les instructions AVANT de
commencer l’assemblage et l’utilisation du
produit.
• Déballez le produit et enlevez les matériaux
d’emballage, y compris le sac en polyéth ylène.
Identifiez et vérifiez toutes les pièces.
INSTRUCTIONS D’ASSEMBLAGE
Foundations Worldwide, Inc.
5216 Portside Dr.
Medina, OH 44256 USA
PH: 1 330.722.5033
FAX: [phone]
www.forever-eclectic.com
Scout Lit de bébé 4 en 1
Modèle Couvet: F35901
AB20396_G2
AB20396_G1

16
Part Description Part Number QTY
A. Traverse arrière supérieure 22303604 1
B. Poteau arrière - Droite 22303595 1
C. Poteau avant - droit 22303599 1
D. Poteau arrière - gauche 22303597 1
E. Poteau avant - gauche 22303601 1
F. Assemblage avant 22303579 1
G. Tendeuse 22303580 1
H. Ensemble tête courte 22303509 1
I. Assemblage du pied court 22303495 1
Pièces de berceau
LISTE DES PIÈCES PIÈCES DE CRIB
Part Description Part Number QTY
J. Ressort 11201183 1
K. Rail supérieur 22303574 1
L. Rail d’extrémité - droit 22303576 1
M. Rail d’extrémité - gauche 22303575 1
N. Rail inférieur 22303643 1
P. Panneau arrière supérieur 22303577 1
Q. Panneau inférieur 22303642 1
R. Embout 22303512 2
S. Traverse supérieure avant 22303511 1
A
B
C
D
E
F
G
HI
J
K
LM
N
P
Q
R
AB20396_G3
S

17
# 2 Moyen tournevis droit
Package Matériel
PRÉPARATION
Retirez soigneusement et disposer tout le matériel et les pièces. Vérifiez la quantité et correspondre à la liste de
pièces. Construire Lit bébé sur un sol même plat. Remarque: pendant le processus d’assemblage lorsque
utilisant des vis ou des boulons, Check chacun avec la liste des pièces par lettre et l’identification de la taille. Placez
chaque vis ou un boulon sur le schéma de l’élément qui est esquissé taille réelle. Assurez-vous d’utiliser la bonne
taille spécifiée dans les directions de montage. Si des pièces sont manquantes ou brisées ou vous avez besoin d’aide
pour l’assemblage. NE PAS retourner votre produit au distributeur.Veuillez identifier le lit par le numéro de modèl
identification apposée sur la face intérieure de l’assemblage de tête courte et de l’assemblage du pied de tri lorsque
vous appelez ou écrivez à Foundations. Prenez note de tous
numéros d’identification et inclure cette information avec votre demande.
Le chef de boulons Allen (V) et (Y) ont un patch améliorant la friction sur le fil qui peut entraîner une résistance lors
du serrage. Ne pas remplacer les pièces!
OUTILS PROPOSÉS
MATÉRIEL DE LISTE DES PIÈCES
Part Description Part Number QTY
AA. Doupille de cheville
8mmx 30mm
11200969 10
BB. Boulon à tête Allen
6mm x 45mm
11200974 22
CC. Boulon à tête Allen
6mm x 80mm
11200971 8
DD. Boulon à tête Allen
6mm x 55mm
11200984 6
EE. Écrou de connecteur
commun
11200970 16
FF. Clé Allen 11200978 2
GG. Écrou de connecteur 11201001 4
Part Description Part Number QTY
HH. Boulon à tête Allen
6mm x 12mm
11201000 4
II. Boulon à tête Allen
6mm x 17mm
11200976 8
JJ. Goupille en acier 11201002 1
KK. Boulon à tête Allen
6mm x 70mm
11200997 6
LL. Boulon à tête Allen
6mm x 90mm
11201061 2
MM. Goupille de cheville
10mm x 40mm
11200995 2
AA BB CC
DD EE FF GG
HH II JJ KK
LL MM
AB20396_G4

18
ÉTAPE 1
ÉTAPE 2
L
EE
MM
LL
K
M
K x 1
L x 1
M x 1
EE x 2
LL x 2
MM x 2
AB20396_G5
MM
LL
EE
A
P
AA
AA
BB x 4
A x 1
P x 1
AA x 2
BB x 4
AB20396_G6

19
ÉTAPE 3
ÉTAPE 4
Q
KK x 2
EE x 2
KK x 2
EE x 2
Q x 1
EE x 4
KK x 4
AB20396_G7
KK x 2
EE x 2
KK
KK
N
N x 1
KK x 2
AB20396_G7.5