Fortinet FortiCam OB20 User manual

FortiCam OB20
QuickStart Guide

January 22, 2015
3rd Edition
Copyright © 2015 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare®and FortiGuard®,
and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein
may also be registered and/or common law trademarks of Fortinet. All other product or company
names may be trademarks of their respective owners. Performance and other metrics contained
herein were attained in internal lab tests under ideal conditions, and actual performance and other
results may vary. Network variables, different network environments and other conditions may affect
performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet
disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding
written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that
the identified product will perform according to certain expressly-identified performance metrics
and, in such event, only the specific performance metrics expressly identified in such binding
written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to
performance in the same ideal conditions as in Fortinet’s internal lab tests. Fortinet disclaims in full
any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet
reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and
the most current version of the publication shall be applicable.
Technical Documentation http://docs.fortinet.com
Knowledge Base http://kb.fortinet.com
Forums https://support.fortinet.com/forum
Customer Service & Support https://support.fortinet.com
Training Services http://training.fortinet.com
FortiGuard Threat Research & Response http://www.fortiguard.com
Document Feedback Email: [email protected]

Package contents 1
Hardware installation 2
Functions and indicators 7
Technical specifications 8
Register for support 10
Cautions and warnings 11
Regulatory compliance 13
Fortinet Product License Agreement / EULA and Warranty Terms 14
Table of contents

Page 1
Package contents
Your box should contain:
FortiCam OB20 camera
QuickStart Guide
Shielding cover
Water proof connectors
Dry bag
Screw bag
Allen key
1
FortiCam OB20
QuickStart Guide
QuickStart
Guide Shielding Cover Screw Bag
Water Proof Connectors Dry Bag Allen Key

Page 2
Hardware installation
FortiCam OB20 outdoor cameras can be mounted on walls using
the accessory bracket (SKU: FCM-OB1-MNT), which can be ordered
separately from Fortinet. For best results, choose a location where the
cable can enter the wall or ceiling directly behind the camera (i.e. it does
not run outside, along the surface), and where the camera is not easily
reached. This deters vandals from damaging the cables or covering the
camera. For extra protection, house the cables in conduit.
Caution: In many countries, surveillance is restricted by law. Before
installing, consult your legal advisor.
To mount the camera
1. Install the wall mount bracket plate to the wall with the supplied anchors
and screws.
2. Attach the bracket assembly to the bottom of the camera with two
screws.

Page 3
3. (1)Attach the bracket hinge to the side of the camera with two screws.
(2)Push back the spring on the mortise lock and hook the camera onto
the bracket.
4. Connect all the cables to the camera through the bracket.

Page 4
5. Secure the two screws on the wall mount bracket.
6. Attach the bracket to the plate and adjust the angle of the camera as
desired.
To connect the PoE cable
The camera use PoE connection for data transmission and power supply.
Make sure you have a PoE switch first.
1. Construct the PoE cable according to the following pin definitions of
the RJ45 connector.

Page 5
Pin 1: Transmit out+ (Tx+)
Pin 2: Transmit out- (Tx-)
Pin 3: Receive In+ (Rx+)
Pin 4: DC 48V
Pin 5: DC 48V
Pin 6: Receive in- (Rx-)
Pin 7: GND 48V
Pin 8: GND 48V
2. Install the waterproof connector at the end of the PoE cable and
connect the cable to the connector.

Page 6
To reboot the camera
On the camera, unplug the PoE cable. Or remove the lens cover, press
and hold the reset button for 1 second.
Reset Button
To reset to factory default settings
Press and hold the reset button for 10 seconds.

Page 7
4
5
Functions and indicators
1
2
3
1. IR LED (24pcs)
2. Lens
3. Light Sensor
4. RJ45 Connector 2 (For audio line in/out, RS485, DI/DO)
5. RJ45 Connector 1 (For Ethernet, 802.3at PoE Plus and 802.3af PoE)

Page 8
Technical specifications
Hardware Specifications
Format Indoor/outdoor, infrared night vision
Sensor Type 2 mega-pixel, 1/2.8” Sony CMOS
Iris F1.3, 0.001 Lux (IR OFF, B/W), 0.002 Lux
(F1.4,Color)
Focal Length f = 3 mm–10.5 mm (motorized, autofocus)
View Angle H:90°–30° V:49°–17° D:103°–34°
IRLED / IRC 15m / yes
Streaming Protocol RTSP / HTTPS
Video Compression H.264
Image Resolution 1920 x 1080 at 30 frames per second
1280 x 720 at 30 frames per second
720 x 480 at 30 frames per second
Audio Line in/out
Dimensions
Height x Width x
Length (in)
2.8 x 2.8 x 8.4

Page 9
Height x Width x
Length (mm)
70 x 70 x 213
Weight 2.43 lbs (1100 g)
Power
Power Required PoE (802.3af or 802.3at)
Power
Consumption (AVG)
8.6 watts (802.3af) or 18.2 watts (802.3at)
Compliance
FCC Class B, CE Mark, weatherproof (IP67)
Extension DI/DO Terminal: This is needed to connect the camera with
external input/output devices. The pin definitions are listed as below:
Pin 1: Power output +4.5V
Pin 2: Digital output
Pin 3: Digital input
Pin 4: Ground
Pin 5: RS-485- (not in use)
Pin 6: RS-485+ (not in use)
Pin 7: Audio line in
Pin 8: Audio line out (not in use)

Page 10
Register for support
Register your Fortinet product to receive:
• Technical support • New product features • Protection from new threats
Vous devez enregistrer le produit pour recevoir:
• Support technique • Nouvelles fonctionnalitées du produit • Protection contre de nouvelles menaces
La reistrazione ti permette di usufruire di:
• Supporto tecnico • Nuove funzionalita • Proteezione dalle ultime minaccce
Debe registrar el producto para recibir:
• Apoyo técnico • Nuevas funcionalidades del producto • Protección contra ataques
下記フォーティネットからのサービスを受けるために、ご購入製品の登録が必要です:
• テクニカルサポート • 新機能の追加 • 新しい脅威への防御
注册您的飞塔产品后可以得到:
• 技术支持 • 新产品特点信息 • 最新威胁防护
Web: https://support.fortinet.com/
Toll free: 1 866 648 4638
Phone: [phone]
Fax: [phone]
Email: [email protected]

Page 11
Cautions and warnings
Environmental Specications
Operating Temperature — 0 to 40°C (32 to 104°F) If this device is installed in a closed or multi-unit rack assembly, the rack’s
ambient temperature may be greater than the room’s ambient temperature. Make sure the rack environment is compatible with the
manufacturer’s maximum rated ambient temperature (Tma).
Température ambiante élevée — 0 à 40 ° C (32 à 104 ° F) Si cet appareil est installé dans un cabinet fermé, la température ambiante du
cabinet peut être supérieure à la température ambiante de la pièce . Assurez- vous que l’environnement dans le cabinet est compatible
avec la température ambiante maximale du fabricant (Tma).
Storage temperature — -35 to 70°C (-31 to 158°F)
Température d’entreposage — -35 à 70 ° C (-31 à 158 ° F)
Humidity — 20 to 95% non-condensing
Humidité — 20 à 95% sans condensation
Operating altitude — < 2250 m (7380 ft)
Altitude opérationnelle — <2250 m (7380 pi)
Air Flow — For rack installation, make sure that the amount of air ow required for safe operation of the equipment is not compromised.
For free-standing installation, make sure that the appliance has at least 2 inches (5 cm) of clearance on each side to allow for adequate
air flow and cooling.
Ventilation — Pour une installation dans un cabinet, assurez-vous que la ventilation nécessaire au fonctionnement de l’équipement n’est
pas compromise. Pour une installation autonome, assurez-vous que l’appareil dispose d’au moins 2 pouces (5 cm) de dégagement de
chaque côté pour permettre l’écoulement de l’air et un refroidissement adéquat.
Circuit Overloading — To avoid overloading, use the ratings on the label. Consider the equipment’s connection to the supply circuit and
the effect that circuit overloading might have on current protection and supply wiring.
Surtension — Pour éviter de surcharger le circuit d’alimentation, référez-vous aux notes sur l’étiquette de l’équipement . Envisagez
l’effet que la surtension du circuit pourrait avoir sur la protection de surtension et le câblage d’alimentation.
Reliable earthing — Make sure all rack-mounted equipment is grounded. This includes supply connections (e .g . power strips), not
only direct connections to the branch circuit.
Mise à la terre — Assurez-vous que tout l’équipement est mis à la terre . Ceci comprend les connexions d’alimentation (par exemple,
les barres d’alimentation) en plus des connexions directes au circuit de dérivation.
Interference — If possible, use Shielded Twisted Pair (STP) Ethernet cables instead of Unshielded Twisted Pair (UTP).
Interférence — Si possible, utilisez des câbles Ethernet de paire torsadée blindée (STP) plutôt que de paire torsadée non blindée (UTP).
Safety
Mechanical Loading — To avoid personal injury or damage to the appliance, Fortinet recommends that 2 or more people together
install the appliance into the rack. Balance the equipment to avoid uneven mechanical loading and tipping. Do not place heavy objects
on the appliance.
Installation — Pour éviter des blessures ou des dommages à l’appareil, Fortinet recommande que deux personnes ou plus installent
ensemble cet équipement dans un cabinet. L’installation du matériel à l’intérieur de la baie doit être effectuée de façon à éviter toute

Page 12
situation dangereuse liée à une installation non conforme. Ne placez pas d’objets lourds sur l’appareil, celui-ci n’étant pas conçu pour
soutenir un poids additionnel.
Moving parts — Hazardous moving parts. Keep away from moving fan blades.
Pièces mobiles — Pièces mobiles dangerouses. Se tenir éloigné des pales de ventilateurs mobiles.
Electric shock / re — To avoid risk of damage to your equipment, personal injury, or death, disconnect cables while servicing. Do not
connect or disconnect cables during lightning. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink
or laundry tub, in a wet basement or near a swimming pool. Do not use a telephone to report a gas leak while near the leak. Do not
install this equipment in a home or public area accessible to the general population. When installed in schools, this equipment must be
installed in a location where access is restricted to trained personnel.
Choc électrique / feu — Débranchez les cordons de la source d’alimentation avant tout entretien. Ne pas brancher ou débrancher les
câbles lors d’un orage an de ne subir aucun dommage corporel et éviter d’endommager votre appareil. Ne pas utiliser ce produit près
de l’eau par exemple, près d’une baignoire, d’un lavabo, d’un évier de cuisine ou cuve à lessive, dans un sous-sol humide ou près d’une
piscine. Ne pas utilisez un téléphone pour signaler une fuite de gaz à proximité de la fuite. Le produit n’a pas vocation à être installé
dans un foyer ou un lieu public pour l’ensemble de la population. Dans les écoles, ce matériel doit être installé en lieu sûr, de façon à le
rendre accessible seulement aux personnels qualies.
Battery — Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries in a fire. They may explode.
Dispose of used batteries according to your local regulations. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries.
Batterie — Risque d’explosion si vous remplacez la batterie par un modèle incompatible. Jetez les piles usagées selon les
réglementations locales en vigueur. IMPORTANT: Suisse: Annexe 4.10 de SR814.013 s’appliquant aux batteries.
警告
本電池如果更換不正確會有爆炸的危險
請依製造商說明書處理用過之電池
Grounding — To prevent damage to your equipment, connections that enter from outside the building should pass through a lightning
/ surge protector, and be properly grounded. Use an electrostatic discharge workstation (ESD) and/or wear an anti-static wrist strap
while you work. In addition to the grounding terminal of the plug, on the back panel, there is another, separate terminal for earthing.
Mise à la terre — Pour éviter d’endommager votre matériel, assurez-vous que les branchements qui entrent à partir de l’extérieur
du bâtiment passent par un parafoudre / parasurtenseur et sont correctement mis à la terre. Utilisez un poste de travail de décharge
électrostatique (ESD) et / ou portez un bracelet anti-statique lorsque vous travaillez. Ce produit possède une borne de mise à la terre qui
est prévu à l’arrière du produit, à ceci s’ajoute la mise à la terre de la prise.
For products with power over Ethernet (PoE):
Power over Ethernet (PoE) — Do not connect this device to PoE networks with routing to the outside plant. Use this equipment in a
Network Environment 0 per IECTR 62101. Do not use PoE injectors that are not IEEE 802.3af compliant. They may damage your device.
Alimentation par Ethernet — Ce matériel doit être utilisé dans un Environnement Réseau 0 par IECTR 62101. Ce matériel est
uniquement connecté aux réseaux PoE sans installation externe de routage. Cet appareil est conforme aux normes IEEE 802.3af. Ne
pas utiliser d’autres injecteurs d’alimentation non conformes sous peine d’endommager votre matériel.
For products with RPS connections:
The RPS connection is intended to be connected to the power source from Fortinet IEC certied/UL Listed equipment. The power rating
of the product must be less than or equal to the output rating of the power source.
La connexion RPS est destinéeàraccorder la source d’alimentation au matériel certié IEC/UL. La consommation du matériel doitêtre
inférieure ouégaleàcelle de la source d’alimentation.

Page 13
Regulatory compliance
Federal Communication Commission (FCC) – USA
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance
with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
WARNING: Any changes or modifications to this product not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment
Industry Canada Equipment Standard for Digital Equipment (ICES) – Canada
CAN ICES-3 (A) / NMB-3 (A)
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference
Regula¬tions of the Canadian Department of Communications.
Le présent appareil numérique n’emet pas de bruits radioélectriques dép¬assant les limites applicables aux appareils numeriques
de la classe A préscrites dans le Règlement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada.
European Conformity (CE) - EU
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required
to take adequate measures.
Voluntary Control Council for Interference (VCCI) – Japan
この装置は、クラスＡ情報技術装置です。 この装置を 家庭環境で使用すると電波妨害を引き起こすことがあります。 この場合
には使用者が適切な対策を講ずるよう要求されることがあります。ＶＣＣＩ－Ａ
Bureau of Standards Metrology and Inspection (BSMI) – Taiwan
這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情況下，使用者會被要求採取某些適當的對策。
China
此为A级产品，在生活环境中，该产品可能会造成无线电干扰。这种情况下，可能需要用户对其采取切实可行的措施

Page 14
Fortinet Product License
Agreement / EULA
and Warranty Terms
Trademarks and Copyright Statement
Fortinet®, FortiGate®, and FortiGuard® are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be trademarks, registered or
otherwise, of Fortinet. All other product or company names may be trademarks of their respective owners. Copyright © 2002-2014 Fortinet, Inc., All Rights
reserved. Contents and terms are subject to change by Fortinet without prior notice. No part of this publication may be reproduced in any form or by any
means or used to make any derivative such as translation, transformation, or adaptation without permission from Fortinet, Inc., as stipulated by the United
States Copyright Act of 1976.
Product License Agreement
The parties to this agreement are you, the end customer, and either (i) where you have purchased your Product within the Americas, Fortinet, Inc., or (ii)
where you have purchased your Product outside of the Americas, Fortinet Singapore Private Limited (each referred to herein as “Fortinet”) .CAREFULLY
READ THE FOLLOWING LEGAL AGREEMENT (THE OR THIS “AGREEMENT” OR “EULA”). USE OF FORTINET PRODUCT(S) AND ANY UPDATES THERETO,
INCLUDING HARDWARE APPLIANCE PRODUCTS, SOFTWARE AND FIRMWARE INCLUDED THEREIN BY FORTINET, AND STAND-ALONE SOFTWARE PRODUCTS
SOLD BY FORTINET (TOGETHER, THE “PRODUCTS”) CONSTITUTES ACCEPTANCE BY YOU OF THE PROVISIONS IN THIS AGREEMENT. FORTINET SHALL NOT BE
BOUND BY ANY ADDITIONAL AND/OR CONFLICTING PROVISIONS IN ANY ORDER, RELEASE, ACCEPTANCE OR OTHER WRITTEN CORRESPONDENCE OR OTHER
WRITTEN OR VERBAL COMMUNICATION UNLESS EXPRESSLY AGREED TO IN A WRITING SIGNED BY THE GENERAL COUNSEL OF FORTINET. YOUR INSTAL-
LATION OR USE OF ANY PRODUCT REPRESENTS AGREEMENT TO THE TERMS HEREIN, AS AMENDED OR UPDATED FROM TIME TO TIME IN FORTINET’S
DISCRETION BY FORTINET PUBLISHING AN AMENDED OR UPDATED VERSION. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, DO NOT
START THE INSTALLATION PROCESS OR USE THE PRODUCTS. IF YOU DO NOT AGREE TO THE PROVISIONS OF THIS AGREEMENT, YOU SHOULD IMMEDIATELY,
AND IN NO EVENT LATER THAN FIVE (5) CALENDAR DAYS AFTER YOUR RECEIPT OF THE PRODUCT RETURN THE PRODUCTS TO THE LOCATION WHERE YOU
OBTAINED THEM FOR A FULL REFUND FROM THE PARTNER SELLING TO YOU.
1. License Grant.
This is a license, not a sales agreement, between you and Fortinet. The term “Software”, as used throughout this Agreement, includes all Fortinet and
third party rmware and software provided to you with, or incorporated into, Fortinet appliances and any stand-alone software provided to you by Fortinet,
with the exception of any open source software contained in Fortinet’s Products which is discussed in detail in section 15 below, and the term “Software”
includes any accompanying documentation, any updates and enhancements of the software or rmware provided to you by Fortinet, at its option. Fortinet
grants to you a non-transferable (except as provided in section 5 (“Transfer”) and section 15 (“Open Source Software”) below), non-exclusive, revocable
(in the event of your failure to comply with these terms or in the event Fortinet is not properly paid for the applicable Product) license to use the Software
solely for your internal business purposes (provided, if a substantial portion of your business is to provide managed service provider services to your
end-customers, you may use the Software embedded in FortiGate and supporting hardware appliances to provide those services, subject to the other re-
strictions in this Agreement), in accordance with the terms set forth in this Agreement and subject to any further restrictions in Fortinet documentation, and
solely on the Fortinet appliance, or, in the case of blades, CPUs or databases, on the single blade, CPU or database on which Fortinet installed the Software
or, for stand-alone Software, solely on a single computer running a validly licensed copy of the operating system for which the Software was designed, or,
in the case of blades, CPUs or databases, on a single blade, CPU or database. For clarity, notwithstanding anything to the contrary, all licenses of Software

Page 15
to be installed on blades, CPUs or databases are licensed on a per single blade, solely for one blade and not for multiple blades that may be installed in a
chassis, per single CPU or per single database basis, as applicable. The Software is “in use” on any Fortinet appliances when it is loaded into temporary
memory (i.e. RAM). You agree that, except for the limited, specic license rights granted in this section 1, you receive no license rights to the Software.
2. Limitation on Use.
You may not attempt to, and, if you are a corporation, you are responsible to prevent your employees and contractors from attempting to, (a) modify,
translate, reverse engineer, decompile, disassemble, create derivative works based on, sublicense, or distribute the Software; (b) rent or lease any rights
in the Software in any form to any third party or make the Software available or accessible to third parties in any other manner; (c) except as provided in
section 5, transfer assign or sublicense right to any other person or entity, or (d) remove any proprietary notice, labels, or marks on the Software, Products,
and containers.
3. Proprietary Rights.
All rights, title, interest, and all copyrights to the Software and any copy made thereof by you and to any Product remain with Fortinet. You acknowledge
that no title to the intellectual property in the Software or other Products is transferred to you and you will not acquire any rights to the Software or other
Products except for the specic license as expressly set forth in section 1 (“License Grant”) above.
4. Term and Termination.
Except for evaluation and beta licenses or other licenses where the term of the license is limited per the evaluation/beta or other agreement or in the order-
ing documents, the term of the license is for the duration of Fortinet’s copyright in the Software. Fortinet may terminate this Agreement, and the licenses
and other rights herein, immediately without notice if you breach or fail to comply with any of the terms and conditions of this Agreement. You agree that,
upon such termination, you will cease using the Software and any Product and either destroy all copies of the Fortinet documentation or return all materials
to Fortinet. The provisions of this Agreement, other than the license granted in section 1 (“License Grant”), shall survive termination.
5. Transfer.
If you are a Fortinet contracted and authorized reseller or distributor of Products, you may transfer (not rent or lease unless specically agreed to in writing
by Fortinet) the Software to one end user on a permanent basis, provided that: (i) you ensure that your customer and the end user receives a copy of this
Agreement, is bound by its terms and conditions, and, by selling the Product or Software, you hereby agree to enforce the terms in this Agreement against
such end user, (ii) you at all times comply with all applicable United States export control laws and regulations, and (iii) you agree to refund any fees paid
to you by an end user who purchased Product(s) from you but does not agree to the terms contained in this Agreement and therefore wishes to return
the Product(s) as provided for in this Agreement. Further, if you are a non-authorized reseller of Products, you are not authorized to sell Product(s) or
Software, but, regardless, by selling Product(s) or Software, you hereby agree you are bound by the restrictions and obligations herein and are bound to: (i)
ensure that your customer and the end user receive a copy of this Agreement and are bound in full by all restrictions and obligations herein (ii) enforce the
restrictions and obligations in this Agreement against such customer and/or end user, (iii) comply with all applicable United States export control laws and
regulations and all other applicable laws, and (iv) refund any fees paid to you by a customer and/or end user who purchased Product(s) from you but does
not agree to the restrictions and obligations contained in this Agreement and therefore wishes to return the Product(s) as provided for in this Agreement.
Notwithstanding anything to the contrary, distributors, resellers and other Fortinet partners (a) are not agents of Fortinet and (b) are not authorized to bind
Fortinet in any way.
6. Limited Warranty.
Fortinet provides this limited warranty for its product only to the single end-user person or entity that originally purchased the Product from Fortinet or
its authorized reseller or distributor and paid for such Product. The warranty is only valid for Products which are registered on Fortinet’s Support Website:
https://support.fortinet.com; or on the TalkSwitch support website: http://global.talkswitch.com; or such other website as provided by Fortinet. For the
below software warranty to start, registration must take place within three hundred sixty-ve (365) days from the date the Product was originally shipped
from Fortinet’s facilities or the warranty is null and void and will not be honored. For the hardware warranty, such warranty starts on the earlier of the date
of Product registration on Fortinet’s Support Website or ninety (90) days from the date that the Product was originally shipped from Fortinet’s facilities. It
is the Fortinet distributor’s and reseller’s responsibility to make clear to the end user the date the product was originally shipped from Fortinet, and it is the
end user’s responsibility to understand the original ship date from the party from which the end user purchased the product. All warranty claims must be
submitted in writing to Fortinet before the expiration of the warranty term or such claims are waived in full, i.e. ninety (90) days from the earlier of registra-
tion or the automatically started term for hardware and spare parts claims and three hundred sixty-ve (365) days from registration within three hundred
sixty-ve (365) days from shipment for software claims. Fortinet provides no warranty for any beta, donation or evaluation Products, for any spare parts not
purchased directly from Fortinet by the end-user, for any accessories, or for any stand-alone software.
Fortinet warrants that the hardware portion of the Products, including spare parts unless noted otherwise (“Hardware”) will be free from material defects

Page 16
in workmanship as compared to the functional specications for the period set forth as follows and applicable to the Product type (“Hardware Warranty
Period”): a three hundred sixty-ve (365) day limited warranty for the Hardware excluding spare parts, , power supplies, and accessories (provided,
solely with respect to FortiAP indoor Wi-Fi access point Hardware appliance products and FortiSwitch Hardware appliance products other than the
FortiSwitch-5000 series (for both excluding spare parts, power supplies, and accessories), the warranty herein shall last from the start of the warranty
period as discussed above until ve (5) years following the product announced end-of-life date), and, for spare parts, power supplies, and accessories,
solely a ninety (90) days limited warranty. Fortinet’s sole obligation shall be to repair or replace the defective Hardware at no charge to the original owner.
This obligation is exclusive of transport fees, labor or installation costs, and any other cost which are not directly associated to the Product. Such repair or
replacement will be rendered by Fortinet at an authorized Fortinet service facility as determined by Fortinet. The replacement Hardware need not be new or
of an identical make, model, or part; Fortinet may, in its discretion, replace the defective Hardware (or any part thereof) with any reconditioned Product that
Fortinet reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. The Hardware Warranty Period for
the repaired or replacement Hardware shall be for the greater of the remaining Hardware Warranty Period or ninety days from the delivery of the repaired or
replacement Hardware. If Fortinet determines in its reasonable discretion that a material defect is incapable of correction or that it is not practical to repair
or replace defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by Fortinet upon return to Fortinet of
the defective Hardware. All Hardware (or part thereof) that is replaced by Fortinet, or for which the purchase price is refunded, shall become the property of
Fortinet upon replacement or refund.
Fortinet warrants that the software portion of Hardware Products will substantially conform to Fortinet’s then current functional specications for the
Software, as set forth in the applicable documentation for a period of ninety (90) days (“Software Warranty Period”), if the Software is properly installed on
approved Hardware and operated as contemplated in its documentation. Fortinet’s sole obligation shall be to repair or replace the non-conforming Software
with software that substantially conforms to Fortinet’s functional specications. Except as otherwise agreed by Fortinet in writing, the replacement Software
is provided only to the original licensee, and is subject to the terms and conditions of the license granted by Fortinet for the Software. The Software War-
ranty Period shall extend for an additional ninety (90) days after any replacement software is delivered. If Fortinet determines in its reasonable discretion
that a material non-conformance is incapable of correction or that it is not practical to repair or replace the non-conforming Software, the price paid by
the original licensee for the non-conforming Software will be refunded by Fortinet; provided that the non-conforming Software (and all copies thereof) is
rst returned to Fortinet. The license granted respecting any Software for which a refund is given automatically terminates immediately upon refund. For
purpose of the above hardware and software warranties, the term “functional specications” means solely those specications authorized and published by
Fortinet that expressly state in such specications that they are the functional specications referred to in this section 6 of this Agreement, and, in the event
no such specications are provided to you with the Software or Hardware, there shall be no warranty on such Software.
7. Disclaimer of Other Warranties and Restrictions.
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED IN SECTION 6 ABOVE, THE PRODUCT AND SOFTWARE ARE PROVIDED “AS-IS” WITHOUT ANY WARRANTY
OF ANY KIND INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY, IMPLIED OR EXPRESS WARRANTY OF MERCHANTABILITY, OR WARRANTY FOR
FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A
PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS FROM THE DATE OF ORIGINAL SHIPMENT FROM
FORTINET. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND
PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. NOTWITHSTANDING ANYTHING TO THE CONTRARY, THE HARDWARE WAR-
RANTY PERIOD DISCUSSED ABOVE DOES NOT APPLY TO CERTAIN FORTINET PRODUCTS, INCLUDING FORTIFONE WHICH HAS A NINETY (90) DAY LIMITED
WARRANTY AND FORTITOKEN WHICH HAS A 365 DAY WARRANTY FROM THE DATE OF SHIPMENT FROM FORTINET’S FACILITIES, AND THE SOFTWARE
WARRANTY DOES NOT APPLY TO CERTAIN FORTINET PRODUCTS, INCLUDING FORTIGATE-ONE AND VDOM SOFTWARE.
The warranty in Section 6 above does not apply if the Software, Product or any other equipment upon which the Software is authorized to be used (a) has
been altered, except by Fortinet or its authorized representative, (b) has not been installed, operated, repaired, or maintained in accordance with instructions
supplied by Fortinet, (c) has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident; (d) is licensed for beta, evaluation,
donation, testing or demonstration purposes or for which Fortinet does not charge a purchase price or license fee. In the case of beta, testing, evaluation,
donation or free Software or Product, the end user acknowledges and agrees that such Software or Product may contain bugs or errors and could cause
system failures, data loss and other issues, and the end user agrees that such Software or Product is provided “as-is” without any warranty whatsoever,
and Fortinet disclaims any warranty or liability whatsoever. An end user’s use of evaluation or beta Software or Product is limited to thirty (30) days from
original shipment unless otherwise agreed in writing by Fortinet.
8. Governing Law.
Any disputes arising out of this Agreement or Fortinet’s limited warranty shall be governed by the laws of the state of California, without regard to the

Page 17
conict of laws principles. In the event of any disputes arising out of this Agreement or Fortinet’s limited warranty, the parties submit to the jurisdiction of
the federal and state courts located in Santa Clara County, California, as applicable.
9. Limitation of Liability.
TO THE MAXIMUM EXTENT PERMITTED BY LAW AND NOTWITHSTANDING ANYTHING TO THE CONTRARY, FORTINET IS NOT LIABLE UNDER ANY CONTRACT,
NEGLIGENCE, TORT, STRICT LIABILITY, INFRINGEMENT OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT OR SERVICE OR
ANY DAMAGES OF ANY KIND WHATSOEVER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES
FOR LOSS OF GOODWILL, LOSS OF PROFIT, LOSS OF OPPORTUNITY, LOSS OR DAMAGE RELATED TO USE OF THE PRODUCT OR SERVICE IN CONNECTION
WITH HIGH RISK ACTIVITIES, DAMAGE TO PERSONAL OR REAL PROPERTY, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, COMPUTER SECURITY
BREACH, COMPUTER VIRUS INFECTION, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT INCLUDING ANY
PRODUCT RETURNED TO FORTINET FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING
OUT OF ANY BREACH OF THE LIMITED WARRANTY IN SECTION 6 ABOVE, EVEN IF FORTINET HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
THE SOLE REMEDY FOR A BREACH OF THE LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PROD-
UCT AS SPECIFICALLY STATED IN SECTION 6 ABOVE.
10. Import / Export Requirements; FCPA Compliance.
You are advised that the Products may be subject to the United States Export Administration Regulations and other import and export laws; diversion
contrary to United States law and regulation is prohibited. You agree to comply with all applicable international and national laws that apply to the Products
as well as end user, end-use, and destination restrictions issued by U.S. and other governments. For additional information on U.S. export controls see
www.bis.doc.gov. Fortinet assumes no responsibility or liability for your failure to obtain any necessary import and export approvals. You represent that
neither the United States Bureau of Industry and Security nor any other governmental agency has issued sanctions against you or otherwise suspended,
revoked or denied your export privileges. You agree not to use or transfer the Products for any use relating to nuclear, chemical or biological weapons, or
missile technology, unless authorized by the United States Government by regulation or specic written license. Additionally, you agree not to directly or
indirectly export, import or transmit the Products contrary to the laws or regulations of any other governmental entity that has jurisdiction over such export,
import, transmission or use. Furthermore, you represent that you understand, and you hereby agree to comply with, all requirements of the U.S. Foreign
Corrupt Practices Act and all other applicable laws. For beta, testing, evaluation, donation or free Products and/or related services, you hereby agree,
represent and warrant to Fortinet that (a) receipt of the Products and/or services comply with all policies and you have obtained all necessary approvals for
such Products and/or services, (b) the Products and/or services are not provided in exchange for Fortinet maintaining current business or for new business
opportunities, and (c) the Products and/or services are not being received for the benet of, and are not being transferred to, any government entity,
representative or afliate.
11. U.S. Government End Users.
The Software and accompanying documentation are deemed to be “commercial computer software” and “commercial computer software documentation,”
respectively, pursuant to DFAR Section 227.7202 and FAR Section 12.212, as applicable. Any use, modication, reproduction, release, performance, display
or disclosure of the Software and accompanying documentation by the United States Government shall be governed solely by the terms of this Agreement
and shall be prohibited except to the extent expressly permitted by the terms of this Agreement and its successors.
12. Tax Liability.
You agree to be responsible for payment of any sales or use taxes imposed at any time on this transaction.
13. General Provisions.
Except as specically permitted and required in section 5 (“Transfer”) above, you agree not to assign this Agreement or transfer any of the rights or obliga-
tions under this Agreement without the prior written consent of Fortinet. This Agreement shall be binding upon, and inure to the benet of, the successors
and permitted assigns of the parties. The United Nations Convention on Contracts for the International Sales of Goods is expressly excluded. This Agreement
and other Fortinet agreements may be amended or supplemented only by a writing that refers explicitly to the agreement signed on behalf of both parties,
or, for this Agreement, as otherwise expressly provided in the lead-in above Section 1 above, provided, notwithstanding anything to the contrary and except
for this Agreement which may be amended or updated as expressly provided in the lead-in above Section 1 above, for any amendment or other agreement
to be binding on Fortinet, such amendment or other agreement must be signed by Fortinet’s General Counsel. No waiver will be implied from conduct or
failure to enforce rights nor effective unless in a writing signed on behalf of the party against whom the waiver is asserted. If any part of this Agreement is
found unenforceable, that part will be enforced to the maximum extent permitted and the remainder shall continue in full force and effect. You acknowledge
that you have read this Agreement, understand it, and agree to be bound by its terms and conditions.
14. Privacy.