Hootoo HT-IP210P User manual

HooToo Inc.
HooToo IP Camera
User Manual(part two)
For Model: HT-IP210P
Published by SunvalleyTek Group
2014/9/14

Content
1. IPCamClient (windows software)......................................................3
Set up...............................................................................................3
CAM............................................................................................... 13
Local Setting.................................................................................. 13
Remote Settings.............................................................................15
SYS..................................................................................................18
Record (Note: Change setting here will apply to all cameras.)....18
Alarm............................................................................................. 18
Auto run.........................................................................................19
Devices list.....................................................................................19
Search file......................................................................................20
Version...........................................................................................20
Remote View From Internet.........................................................21
2. IP Camera Tool(MJPEG)................................................................ 22
IE (Internet Explorer) Browser..................................................... 25
- Live Video................................................................................ 25
- Multi-Device............................................................................ 27
- Network................................................................................... 28
- Audio video..............................................................................30
- System......................................................................................31
- Other........................................................................................34
Fire Fox & Chrome Browser..........................................................37

How to Setup HT-IP210P on Windows PC
1.IPCamClient (windows software)
Set up
a. Insert the attached CD in your PC and find IPCamClient setup.exe file ,
double click to install it to your PC.
Note: You can also download it in www.hootoo.com,

b. Open IPCamClient, click “ADD”,
c. Click “next”,

d. Click ‘search’,
e. Select camera IP address from the result and then click ‘OK’

f. Device Name: Enter a customized name for your camera.
Device ID: UID code (p2p) of this Camera
Account: admin (default)
Password: 000000 (default)
g. Click ‘finish’ to go to the next step

h. Select your camera, click “play”, and then you can view the live video feed
i. Here is an example of live video feed
j. Please click the “CAM” to configure camera wireless parameters. Then select
“Wireless LAN Settings”

option.

k. Click “Join a new wireless network”
l. Click “search” to scan nearby wireless network

m. Select the wireless network you wish to connect to. Then enter password,
and then click “join”
n. Wait for counting down to finish, and then click ok.

o. Click “Next” after counting down finished.
p. Unplug the network cable that connects the camera to the router, then click
“Next”

q. Wait for counting down, click “Finish”
r. Wait few seconds for camera to be connected with router wirelessly. “Close”,
camera will rotating for a while to check its on status, and then click , live
video feed will show up.

CAM
CAM (camera settings)
Local Setting
Here is the basic information of your camera

Device Name: editable name of your camera
IP Address: The code shown here is the camera’s UID
Port: this is camera’s P2P server port number
View Account / Password: can be customized
Support PTZ: enable camera title or router to monitor different area from various
angles.
Support Audio: enable two way audio communications.
Flip Image: make the video image upside down
Mirror Horizontal: reverse the video image from left to right.
Record
Regular Record
Before you start to record, please click “SYS” and set a record save path in your PC by
clicking “Add”. Left click the round icon to start to record, once recording
begin, it will turns to red
1SYS
2Add: to select record saving path
3Record icon: Stop Record, Record has been (start record), Plan Record
4To set record file length

Schedule Record:
Go to “CAM”, tick to enable record, you can either set a specified recording period,
or keep camera recording all the time.
Remote Settings
Video Info
To select different video definition for camera

Password Settings:
To change password
Motion Detection:
To set details for camera to record a short video when any motion detected.
1. Select motion detection sensitivity.

2. Go to > alarm, tick “Alarm Record”, and select video length.
Wireless Lan Settings: Please refer to “wireless connection set up”
section.

SYS
Record (Note: Changes set here will be applied to all cameras)
- to select a save path for record files
- to set the record length
- add timestamp on record
- Automatically cover the earliest clips when recording space is not enough.
Alarm

Auto run
Enable/disable this IPCamClient software to start up with computer.
Devices list
Check the list of the cameras on board.

Search file
Search and play record files.
Version
Check version number of this CMS (IPCamClient software)