Fortyfour 9607601007 Series User manual

IPX6 Waterproof Speaker
Model: X9607601007
User Manual
INSTRUCTION FOR USER AND CARE
Dear Customer.
Thank you for purchasing this product. We kindly ask you to read and save this instruction
manual for future reference. Please read all the instructions before using this speaker.
Accessories:
Please check if all the items below are included in your package:
1*Speaker
1*Type-C USB Cable
1*3.5m Audio Cable
1*Instruction Manual
Charging:
Plug the charging cable into the speaker and connect to another USB power source,
such as a PC / MAC, etc.
Functions:
TWS
TF
AUX-IN
BLUETOOTH
HANDS-FREE

RECHARGEABLE BATTERY
VOLUME +/-
PLAY/PAUSE
PREVIOUS / NEXT TRACK
Hunkster is IPX6waterproof.
IMPORTANT: To ensure that the Hunkster is waterproof, please remove all cable
connections and close the protective cap; exposing the Hunkster to liquid without
these measures may cause permanent damage to the speaker. Do not expose the
Hunkster to water while it is charging, because doing so may cause permanent
damage to the speaker and power supply. The definition of IPX6waterproof rating is
that a small amount of water sprayed directly from any direction will not enter the
interior.
If the speaker is not used for a long time, please charge it at least once every three
months. Battery life varies with usage patterns and environmental conditions.
Connection:
TWS connection (under Bluetooth Mode only):
1: Please make sure these two speakers to be paired disconnect from your Bluetooth
device before you turn them on. Then please turn on two speakers.
2: Select either of the speaker. Double click "power button to enter TWS status.
3: When successfully paired, The LED indication light on either speaker will stay
yellow, and the other speaker will flash blue.
4: Find “Hunkster” on your device, select it and connect.
5: Once the speakers are well paired at the first time, they will be automatically paired
next time without the above pairing operation.
6: If the speaker used to be paired, it is suggested to press "M" button for 8 seconds to
forcibly cut off the power. Then restart and have same speaker re-paired with required
new speaker according to the above instruction item 1item 4.
7: When speakers are paired, only the "master" speaker will answer the phone.
8: EQ (M button) sound effects can be used when TWS mode.
Bluetooth Connection:
Short press the POWER button for 1 second, the host will directly enter the Bluetooth
search state after booting.（The blue light at the bottom flashes quickly, and there is a
voice prompt）
Search for “Hunkster” on your cellphone and select it once found. The speaker will
issue an indicating tone after the speaker has successfully connected to the cell
phone.
When Bluetooth is not connected, it will automatically shut down after 10 minutes.

Product Overview:
1. Power ON/OFF
Long Press: Power ON/OFF Switch
Double click: Double-click the button to enter the TWS mode
2. MODE
Short pres: Sound change: Default-3D-Bass
Long press: Switch between Bluetooth/TF Card/AUX IN mode, Press 8s to restart
3. Play/Pause
Short press: 1) Play /Stop. 2) Answer calls / Hang up. 3) Ouick double click to dial
the last number
Long press: Disconnected / reject answering
4. - Previous Track/Volume Down Button
5. + Next Track/Volume Up Button
6. Hands-Free
Turn on the phone voice assistant feature.
7. Charging Indicator
8. DC 5V (Type-C USB Cable) Port (For charging only)
9. TF/Micro SD Card Slot
10. Aux-in Slot
Specification
Bluetooth version: V5.0
Power output: 2x10W
Input: DC 5V,1A
Driver: 2x52mm speaker
Battery capacity: 2x 3.7V,1500mAh

Transmission Distance: 10M
Dimension: 215*55*68mm
IMPORTANT SAFEGUARDS:
1. Do not allow water to spill onto the surface or into the product.
2. This unit is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge unless they are
supervised or given instruction concerning the use of the appliance by a person
responsible for their safety.
3. Children should be supervised to ensure they do not play with the unit.
4. If the product surface is damaged or if there is a mechanical or electrical malfunction,
do not use the unit. Contact the authorized service center immediately.
5. Do not shake the unit.
6. Do not place the unit in water.
7. Do not place the product in direct heat. This unit is to be placed in a dry and ventilated
place.
8. Do not place heavy objects on the unit.
9. If the battery is completely flat, connect the USB charging cable to charge the unit.
Please note the unit may not work properly for the first couple of minutes of charging.

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.