FOS Technologies 200W LED Zoom EXTERIOR GOBO PROJECTOR User manual

USER MANUAL
200W LED Zoom EXTERIOR GOBO PROJECTOR
Version 201912
PLEASE READ OVER THIS MANUAL BEFORE OPERATING THE LIGHT FIXTURE

- 1 -
1. SAFETY INSTRUCTION
The 200W LED exterior gobo projector is designed and manufactured to meet the
requirements of People’s Republic of China and international safety regulations.
Modifications to the product could affect safety and render the product non-compliant to
relevant safety standards.
Instructions pertaining to continued protection against fire, electric shock, and injury to
persons are found throughout this manual. Please read all instructions prior to assembling,
mounting, and operating this equipment.
IMPORTANT
ALWAYS READ THE USER MANUAL BEFORE OPERATION. PLEASE CONFIRM THAT
THE POWER SUPPLY STATED ON THE PRODUCT IS THE SAME AS THE MAINS
POWER SUPPLY IN YOURAREA.
● This product must be installed by a qualified professional.
● Always operate the equipment as described in the user manual.
● Aminimum distance of 1m must be maintained between the equipment and combustible
surface.
● The product must always be placed in a well ventilated area.
● Always make sure that the equipment is installed securely.
● DO NOT stand close to the equipment and stare directly into the LED light source.
● Always disconnect the power supply before attempting and maintenance.
●Always make sure that the supporting structure is solid and can support the combined
weight of the products.
ATTENTION
●This product left the place of manufacturer in perfect condition. In order to maintain this
condition and for safe operation, the user must always follow the instructions and safety
warnings described in this user manual.
● Avoid shaking or strong impacts to any part of the equipment.
● Make sure that all parts of the equipment are kept clean and free of dust.
● Always make sure that the power connections are connected correct and secure.
● If there is any malfunction of the equipment, contact us immediately.
● When transferring the product, it is advisable to use the original packaging in which the
product left the factory.
● Shields, lenses or ultraviolet screens shall be changed if they have become damaged to
such an extent that their effectiveness is not conformable.

- 2 -
2. PRODUCT OVERVIEW
①Lens
②Housing
③Fast lock
④Air Outlet
⑤Base Support / Bracket
⑥Top Access Panel
⑦Air Inlet
⑧LCD Display
⑨ESC–Button
⑩Enter–Button
⑪UP–Button
⑫DOWN–Button
⑬DMX Indicator Light
⑭Power OUT(3 pin)
⑮DMX OUT(3 pin)
⑯DMX IN(3 pin)
⑰Power IN(3 pin)
⑱WirelessReceiver
⑲Vent Valve
⑳FUSE
Ring Interface
3. MAIN FEATURES
● Modularized component for convenient and easy removal
●7 acceptable customized gobos, simple and fast to change
● 7 dichoric colors with multiple effects
● 30 self-configured auto programs for convenient usage
●5°- 50°linear motorized zoom
●Advanced cooling design to prevent overheat
●Unique and fashionable outlook
● Light weight and compact design
● Waterproof Rate IP65

- 3 -
4. SPECIFICATION
SOURCE
● Light Source: 200W Color White LED
● Color Temperature: 8000K
● Average LED Life: 20,000 Hour
POWER
● Input Voltage: 100-240VAC, 50/60Hz
● Power Consumption: 250W max. at full output
OPTICAL SYSTEM
●Zoom: 5°- 50°linear motorized
● Foucs: Motorized linear focus
● Strobe: 0-20Hz variable speed, synchronization, pulse and random strobe
● Dimmer: 0-100% variable linear dimming curves
COLOR
● 7 Dichoric Colors plus open, Index / Shake / Bi-directional rotating rainbow effect
ROTATION GOBOS
● 7 inter-changeable glass gobos plus open, Shake / Bi-directional rotating rainbow effect
CONTROL / CONNECTION
● DMX Channel: 8CH
● Control Mode: DMX, Auto, Sound, Program
●DMX Input: 3-pin Male plug
●DMX Output: 3-pin Female plug
PHYSICAL
●Body Material: Aluminum
●IP Rate: IP65
WEIGHT / DIMENSION
● Net Weight:11.4kg
● Dimension: 206×378×344mm

- 4 -
5. DIMENSION (MM)
6. MOUNTING AND INSTALLATION
6.1 MOUNTING
● The fixture can be mounted in any position.
● Always ensure that mounting surface can withstand 10 times the weight of the fixture.
● Always use a safety cable when mounting the fixture in any elevated position.
IMPORTANT SAFETY NOTE!!
Always use a safety cable when installing this unit!!
Be sure that the safety cable is connected to a solid load-bearing structure.
6.2 FUSE REPLACEMENT
● Remove the safety cap by a screwdriver.
● Fetch the old fuse from safety cap.
● Install a new fuse.
● Install the safety cap.
● Fuse: 3A

- 5 -
7. REPLACE A ROTATING GOBO
Step1: Open the top access panel by a screwdriver.
Step 2: Take out the old gobo.
Step 3: Insert the new gobo.
Step 4: Cover the top access panel by a screwdriver.
8. DISPLAY PANEL INTRODUCTION
Using the display panel to set the starting DMX address or make other settings. The
functions provided are described in the following sections.
【ESC 】Exit from t the currently selected menu.
【Enter 】Enter the currently selected menu or confirm the
current function value.
【UP 】Scroll “Up” through the menu list or increase the value of the current function.
【DOWN 】Scroll “Down” through the menu list or decrease the value of the current
function.
【DMX 】Green LED indicator light up means DMX signal connected, the indicator
extinguished means no DMX signal.

- 6 -
The classes of each menu are listed in the diagram as below:

- 7 -
9. DMX CHANNEL ASSIGNMENTS
This fixture has 8 DMX channel as below:

- 8 -
10. HOW TO CONFIGURE AUTO PROGRAM
According to different application requirement, users can configure auto program freely
via setting the function value on the LCD display. Users can go into the menu “Run
Mode->Step&&Value”to set the value of each DMX function. Once the configuration is
finished, the configured auto program will be stored, and users can go into the menu “Run
Mode->Auto Program”to play. The interface is below once users click to “Step&&Value”:

- 9 -
11. CLEANING
In order to make the fixture in good condition and extend the life time, we suggest a
regular cleaning to the fixture.
● Clean the inside and outside lens each week to avoid the weaknesses of the fixture due
to accumulation of the dust.
● Clean the fan each week.
● A detailed electric check by approved electrical engineer each three month, make sure
that the circuit contacts are in good condition, prevent the poor contact of circuit from
overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth.
Never use alcohol or solvents. There are no serviceable parts inside the device. Should
you need any spare parts, please order genuine parts from us.

- 10 -