Fossil STARCK User manual

Screw/
Pin
1. To adjust length of bracelet, locate screw/pin and unscrew. (fig. A)
Note: Once released, push screw/pin through from other side.
2. Remove metal retainer from bracelet. (fig. B)
3. Slide off necessary number of metal sleeves. (fig. B)
Note: PU links removed should equal number of metal sleeves removed.
4. Insert bracelet back into the buckle and replace the screw/pin.
FIGURE B
Metal
Sleeve
PU Links
Screw/Pin
Buckle
Metal Retainer
Screw/Pin
FIGURE A
Bracelet Instructions