FourStarGroup 11226514RW User manual

MODEL: 11226514RW
METAL/WOOD WORK STATION

PARTS AND HAREWARE LIST
PARTS LISTNO QTY.
2
A
B
C
D
E
F
G
a
b
c
d
e
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
4 PCS
6 PCS
2 PCS
3 PCS
1 PC
LEFT LEG FRAME
RIGHT LEG FRAME
BOTTOM CONNECTOR BAR
TOP CONNECTOR BAR
CROSS BAR
LARGE TOP PANEL
SMALL TOP PANEL
SMALL BOLT
LARGE BOLT
SCREW
MEDIUM BOLT
ALLEN WRENCH

ASSEMBLY INSTRUCTIONS
3
STEP 1
ATTACH BOTTOM CONNECTOR BAR (C) AND TOP CONNECTOR BAR
(D) TO THE LEG FRAME (A&B) USING SMALL BOLT (a) AND LARGE
BOLT (b) WITH ACCESSARY ALLEN WRENCH (e) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 2
ATTACH THE CROSS BAR (E) TO THE LEG FRAME (A&B) USING
SCREW (c) WITH PHILIPS SCREWDRIVER AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 3
ATTACH THE LARGE TOP PANEL (F) TO THE STEP (2) METAL
FRAME USING LARGE BOLT (b) WITH ACCESSARY ALLEN
WRENCH AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 4
ATTACH SMALL TOP PANEL (G) TO THE LARGE TOP PANEL (F)
USING MEDIUM BOLT (d) WITH ACCESSARY ALLEN WRENCH AS
SHOWN, THEN TIGHTEN ALL THE BOLTS AND SCREWS.
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY, FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACE TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOL REQUIRED:
PHILIPS SCREWDRIVER
CAUTION:
MAXIMUM LOADING CAPACITY IS 20 LBS (9 KG)
A
a
a
a
a
e
be
B
B
D
C

4
STEP 1
ATTACH BOTTOM CONNECTOR BAR (C) AND TOP CONNECTOR BAR
(D) TO THE LEG FRAME (A&B) USING SMALL BOLT (a) AND LARGE
BOLT (b) WITH ACCESSARY ALLEN WRENCH (e) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 2
ATTACH THE CROSS BAR (E) TO THE LEG FRAME (A&B) USING
SCREW (c) WITH PHILIPS SCREWDRIVER AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 3
ATTACH THE LARGE TOP PANEL (F) TO THE STEP (2) METAL
FRAME USING LARGE BOLT (b) WITH ACCESSARY ALLEN
WRENCH AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 4
ATTACH SMALL TOP PANEL (G) TO THE LARGE TOP PANEL (F)
USING MEDIUM BOLT (d) WITH ACCESSARY ALLEN WRENCH AS
SHOWN, THEN TIGHTEN ALL THE BOLTS AND SCREWS.
CAUTION:
MAXIMUM LOADING CAPACITY IS 20 LBS (9 KG)
E
c
c
F
e
b
b
b

STEP 1
ATTACH BOTTOM CONNECTOR BAR (C) AND TOP CONNECTOR BAR
(D) TO THE LEG FRAME (A&B) USING SMALL BOLT (a) AND LARGE
BOLT (b) WITH ACCESSARY ALLEN WRENCH (e) AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 2
ATTACH THE CROSS BAR (E) TO THE LEG FRAME (A&B) USING
SCREW (c) WITH PHILIPS SCREWDRIVER AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 3
ATTACH THE LARGE TOP PANEL (F) TO THE STEP (2) METAL
FRAME USING LARGE BOLT (b) WITH ACCESSARY ALLEN
WRENCH AS SHOWN.
IMPORTANT: DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 4
ATTACH SMALL TOP PANEL (G) TO THE LARGE TOP PANEL (F)
USING MEDIUM BOLT (d) WITH ACCESSARY ALLEN WRENCH AS
SHOWN, THEN TIGHTEN ALL THE BOLTS AND SCREWS.
CAUTION:
MAXIMUM LOADING CAPACITY IS 20 LBS (9 KG)
5
b
e
G